BS EN 1344:2013
Current
The latest, up-to-date edition.
Clay pavers. Requirements and test methods
Hardcopy , PDF
English
09-30-2015
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Evaluation of conformity
6 Marking
Annex A (normative) - Sampling
Annex B (normative) - Method for determination of
dimensions
Annex C (normative) - Method for the determination of
freeze/thaw resistance
Annex D (normative) - Method for the determination of
transverse breaking load
Annex E (normative) - Method for the determination of
abrasion resistance
Annex F (normative) - Method for the determination of
acid resistance
Annex G (informative) - Tactility
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Directive
Bibliography
Defines the requirements of pavers and accessories manufactured from clay for use in the flexible form of construction and in the rigid form of construction.
Committee |
B/507
|
DevelopmentNote |
Supersedes 01/106229 DC. (10/2002) Supersedes 09/30185894 DC. (09/2015)
|
DocumentType |
Standard
|
Pages |
56
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard specifies the requirements of pavers and accessories manufactured from clay for use in the flexible form of construction (see 3.10) and in the rigid form of construction (see 3.11). This European Standard applies to rectangular and other shaped units intended as construction products in pavements mainly for exterior use, including roofs as roof paving units, but which may also be used internally. The flexible form of construction is subjected to pedestrian and vehicular traffic, while the rigid form of construction is usually subjected to pedestrian traffic. This European Standard specifies the characteristics and classes of performance and corresponding test methods. It provides for product marking and for the evaluation of conformity of the product to this European Standard. This European Standard covers only clay pavers and accessories with or without coatings and with or without post firing chemical treatment which do not contain any material with asbestos fibres nor contain formaldehyde. It excludes products intended for refractory and chemical engineering applications and clay floor tiles. It also excludes clay masonry units. This European standard does not cover clay pavers having tactile surfaces.
Standards | Relationship |
SN EN 1344 : 2013 | Identical |
NBN EN 1344 : 2013 COR 2015 | Identical |
I.S. EN 1344:2013 | Identical |
NS EN 1344 : 2013 AC 2015 | Identical |
UNI EN 1344 : 2013 | Identical |
DIN EN 1344:2015-10 | Identical |
NEN EN 1344 : 2013 C1 2015 | Identical |
UNE-EN 1344:2015 | Identical |
NF EN 1344 : 2014 | Identical |
EN 1344:2013 | Equivalent |
EN 1344:2013/AC:2015 | Identical |
13/30284071 DC : 0 | BS 7533-102 - PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE OR CONCRETE PAVING UNITS - PART 102: CODE OF PRACTICE FOR THE CONSTRUCTION AND MAINTENANCE OF PAVEMENTS USING MODULAR PAVING UNITS |
BS 7533-13:2009 | Pavements constructed with clay, natural stone or concrete pavers Guide for the design of permeable pavements constructed with concrete paving blocks and flags, natural stone slabs and setts and clay pavers |
04/30095054 DC : DRAFT OCT 2004 | BS 7533-3 - PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE OR CONCRETE PAVERS - PART 3: CODE OF PRACTICE FOR LAYING PRECAST CONCRETE PAVING BLOCKS AND CLAY PAVERS FOR FLEXIBLE PAVEMENTS |
BS 7997:2003 | Products for tactile paving surface indicators. Specification |
BS 7533-3(2005) : 2005 | PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE OR CONCRETE PAVERS - PART 3: CODE OF PRACTICE FOR LAYING PRECAST CONCRETE PAVING BLOCKS AND CLAY PAVERS FOR FLEXIBLE PAVEMENTS |
08/30194108 DC : 0 | BS 7533-9 - PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE OR CONCRETE PAVERS - CODE OF PRACTICE FOR THE CONSTRUCTION OF RIGID PAVEMENTS OF CLAY PAVERS |
09/30137917 DC : 0 | BS 7533-10 - PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE, OR CONCRETE PAVERS - PART 10: GUIDE FOR THE STRUCTURAL DESIGN OF TRAFFICKED PAVEMENTS CONSTRUCTED OF NATURAL STONE SETTS OR CONCRETE PAVING BLOCKS |
BS 7533-9:2010 | Pavements constructed with clay, natural stone or concrete pavers Code of practice for the construction of rigid pavements of clay pavers |
BS 7533-10:2010 | Pavements constructed with clay, natural stone or concrete pavers Guide for the structural design of trafficked pavements constructed of natural stone setts and bound construction with concrete paving blocks |
07/30159351 DC : 0 | BS 7533-13 - PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE OR CONCRETE PAVERS - PART 13: GUIDE FOR THE STRUCTURAL DESIGN OF PERMEABLE PAVEMENTS |
BS 7533-10:2004 | Pavements constructed with clay, natural stone or concrete pavers Guide for the structural design of trafficked pavements constructed of natural stone setts |
CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
ISO 4662:2017 | Rubber, vulcanized or thermoplastic Determination of rebound resilience |
ISO 8486-1:1996 | Bonded abrasives Determination and designation of grain size distribution Part 1: Macrogrits F4 to F220 |
EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 7619-2:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
CEN/TS 15209:2008 | Tactile paving surface indicators produced from concrete, clay and stone |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.