BS EN 13411-6 : 2004
Current
The latest, up-to-date edition.
TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
Hardcopy , PDF
English
01-01-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
6 Verification of safety requirements
7 Information for use
Annex A (informative) - Asymmetric wedge socket with cast
socket body - Design 1
Annex B (informative) - Asymmetric wedge socket with cast
socket body - Design 2
Annex C (informative) - Recommendations for safe use and
inspection
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 2006/42/EC
Bibliography
Describes the minimum requirements, for asymmetrical wedge socket terminations for stranded steel wire ropes.
| Committee |
MHE/2
|
| DevelopmentNote |
Supersedes BS 7166(1989) and 98/718705 DC. (07/2004) 2004 Edition Re-Issued in June 2009 & incorporates AMD 1 2008. (06/2009) Reviewed and confirmed by BSI, July 2014. (06/2014)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 13411-6 : 2004 + A1 2009 | Identical |
| I.S. EN 13411-6:2004 | Identical |
| NEN EN 13411-6 : 2004 + A1 2008 | Identical |
| UNI EN 13411-6 : 2009 | Identical |
| UNE-EN 13411-6:2005 | Identical |
| EN 13411-6:2004+A1:2008 | Identical |
| NF EN 13411-6 : 2004 + A1 2008 | Identical |
| NS EN 13411-6 : 2004 + A1 2008 | Identical |
| SN EN 13411-6 : 2004 + A1 2009 | Identical |
| DIN EN 13411-6:2009-04 | Identical |
| BS 7906-1:2005 | Use of lifting equipment for performance, broadcast and similar applications Code of practice for installation, use and removal of above stage equipment (excluding trusses and towers) |
| EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
| EN 20286-2 : 1993 | ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
| EN 1562:2012 | Founding - Malleable cast irons |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| SAE J 1035 : JUN 80 | TECHNICAL PUBLICATIONS FOR AGRICULTURAL EQUIPMENT |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| EN 1369:2012 | Founding - Magnetic particle testing |
| ASTM A 148/A148M : 2015-09 | SPECIFICATION FOR STEEL CASTINGS, HIGH STRENGTH, FOR STRUCTURAL PURPOSES |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.