BS EN 13411-4:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Terminations for steel wire ropes. Safety Metal and resin socketing
Hardcopy , PDF
01-14-2022
English
04-30-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
MHE/1
|
| DevelopmentNote |
Supersedes BS 7035(1989) and 98/718703 DC. (04/2002) Supersedes 09/30198357 DC. (04/2011)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard specifies the minimum requirements for the molten metal and resin socketing of steel wire ropes within the scopes of EN 12385-4:2002+A1:2008; EN 12385-5:2002; EN 12385-6:2004; EN 12385-7:2002; EN 12385-8:2002; EN 12385-9:2002 and EN 12385-10:2003+A1:2008. The European Standard is applicable only to those requirements that ensure that the socketing is strong enough to withstand a force of at least 100 % of the minimum breaking force of the rope (i.e. socket termination efficiency factor KT = 1,0). NOTE Rope terminations made by socketing in accordance with this European Standard can be used for determining the breaking force of wire ropes in accordance with EN 12385-1:2002+A1:2008, Annex A. Socketing by the methods and materials described in this standard are for use within the temperature limits given in normative Annex E. This European Standard deals with all significant hazards, hazardous situations and events relevant to metal and resin socket terminations, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).
| Standards | Relationship |
| ONORM EN 13411-4 : 2011 | Identical |
| UNI EN 13411-4 : 2011 | Identical |
| UNE-EN 13411-4:2011 | Identical |
| I.S. EN 13411-4:2011 | Identical |
| NBN EN 13411-4 : 2011 | Identical |
| NEN EN 13411-4 : 2011 | Identical |
| SN EN 13411-4 : 2011 | Identical |
| NF EN 13411-4 : 2011 | Identical |
| EN 13411-4:2011 | Identical |
| NS EN 13411-4 : 2011 | Identical |
| DIN EN 13411-4:2011-06 | Identical |
| 03/316262 DC : DRAFT OCT 2003 | BS 7906-1 - USE OF LIFTING EQUIPMENT FOR PERFORMANCE, BROADCAST AND SIMILAR APPLICATIONS - PART 1: CODE OF PRACTICE FOR INSTALLATION, USE AND REMOVAL OF ABOVE STAGE EQUIPMENT (EXCLUDING TRUSSES AND TOWERS) |
| BS 7906-1:2005 | Use of lifting equipment for performance, broadcast and similar applications Code of practice for installation, use and removal of above stage equipment (excluding trusses and towers) |
| EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
| EN 12385-4:2002+A1:2008 | Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
| EN ISO 604:2003 | Plastics - Determination of compressive properties (ISO 604:2002) |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| EN 1774:1997 | Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid |
| EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
| EN 12385-7:2002 | Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts |
| ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN 12385-10:2003+A1:2008 | Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications |
| EN 12385-6:2004 | Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts |
| EN 12385-8:2002 | Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
| EN ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004) |
| EN 12385-9:2002 | Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.