• Shopping Cart
    There are no items in your cart

BS EN 1340:2003

Current

Current

The latest, up-to-date edition.

Concrete kerb units. Requirements and test methods

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-31-2006

US$364.65
Excluding Tax where applicable

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for materials
  4.1 General
  4.2 Asbestos
5 Requirements for products
  5.1 General
  5.2 Shape and dimensions
      5.2.1 General
      5.2.2 Work dimensions
      5.2.3 Unit geometry
  5.3 Physical and mechanical properties
      5.3.1 General
      5.3.2 Weathering resistance
      5.3.3 Bending strength
      5.3.4 Abrasion resistance
      5.3.5 Slip/skid resistance
      5.3.6 Fire
      5.3.7 Thermal conductivity
  5.4 Visual aspects
      5.4.1 Appearance
      5.4.2 Texture
      5.4.3 Colour
6 Evaluation of conformity criteria
  6.1 General
      6.1.1 Demonstration of conformity
      6.1.2 Assessment of conformity
  6.2 Type testing of the product
      6.2.1 Initial type testing
      6.2.2 Further type testing
      6.2.3 Sampling, testing and compliance criteria
  6.3 Factory production control
      6.3.1 General
      6.3.2 Equipment
      6.3.3 Raw and other incoming materials
      6.3.4 Production process
      6.3.5 Product testing
      6.3.6 Marking, storage and delivery of products
      6.3.7 Non-conforming products
      6.3.8 Product conformity criteria
7 Marking
8 Test report
Annex A (informative) Inspection schemes
      A.1 Equipment inspection
      A.2 Materials inspection
      A.3 Production process inspection
      A.4 Product inspection
      A.5 Switching rules
Annex B (normative) Procedure for acceptance testing of
        a consignment at delivery
      B.1 General
      B.2 Sampling procedure
      B.3 Compliance criteria
Annex C (normative) Measurement of dimensions of a single
        unit
      C.1 Preparation
      C.2 Overall dimensions
      C.3 Draw
      C.4 Chase
      C.5 Straightness and bow
      C.6 Thickness of facing layer
      C.7 Test report
Annex D (normative) Determination of freeze/thaw
        resistance with de-icing salt
      D.1 Principle
      D.2 Specimen
      D.3 Materials
      D.4 Apparatus
      D.5 Preparation of test specimens
      D.6 Procedure
      D.7 Calculation of test results
      D.8 Test report
Annex E (normative) Determination of total water
        absorption
      E.1 Principle
      E.2 Specimen
      E.3 Materials
      E.4 Apparatus
      E.5 Preparation of the test specimens
      E.6 Procedure
      E.7 Calculation of test results
      E.8 Test report
Annex F (normative) Measurement of bending strength
      F.1 Apparatus
      F.2 Preparation
      F.3 Procedure
      F.4 Calculation of test results
      F.5 Test report
Annex G (normative) Measurement of abrasion resistance
      G.1 Principle of wide wheel abrasion test
      G.2 Abrasive material
      G.3 Apparatus
      G.4 Calibration
      G.5 Preparation of the specimen
      G.6 Procedure
      G.7 Measuring the groove
      G.8 Calculation of test results
      G.9 Test report
Annex H (normative) Measuring of abrasion according
        to the Böhme test
      H.1 Principle
      H.2 Abrasive material
      H.3 Apparatus
      H.4 Preparation of specimens
      H.5 Procedure
      H.6 Calculation of test results
      H.7 Test report
Annex I (normative) Method for the determination of
        unpolished slip resistance value (USRV)
      I.1 Principle
      I.2 Apparatus
      I.3 Calibration
      I.4 Sampling
      I.5 Procedure
      I.6 Calculation of test results
      I.7 Test report
Annex J (normative) Verification of visual aspects
      J.1 Preparation
      J.2 Procedure
Annex K (informative) Example of the application of
        the method for checking conformity of bending
        strength by variables (6.3.8.3.B.)
      K.1 General
      K.2 Basic formula
      K.3 Acceptance factors
      K.4 Standard deviations s
      K.5 Application of switching rules
      K.6 Results
Annex ZA (informative) Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Directive (89/106/EEC)
      ZA.1 Scope and relevant characteristics
      ZA.2 Attestation of conformity
      ZA.3 CE marking and labelling

Describes materials, properties, requirements and test methods for unreinforced, cement bound precast concrete kerb units, channels and complementary fittings, that are for use in trafficked paved areas and roof coverings.

Committee
B/507
DevelopmentNote
Supersedes 93/110629 DC (05/2003) Also available as part of BS KIT 165. (09/2005) Supersedes BS 7263-3(2001). (04/2007)
DocumentType
Standard
Pages
88
PublisherName
British Standards Institution
Status
Current
Supersedes

13/30284071 DC : 0 BS 7533-102 - PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE OR CONCRETE PAVING UNITS - PART 102: CODE OF PRACTICE FOR THE CONSTRUCTION AND MAINTENANCE OF PAVEMENTS USING MODULAR PAVING UNITS

EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 7873:1993 Control charts for arithmetic average with warning limits
EN ISO 4288:1997 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
ISO 4662:2017 Rubber, vulcanized or thermoplastic Determination of rebound resilience
ISO 8486-1:1996 Bonded abrasives Determination and designation of grain size distribution Part 1: Macrogrits F4 to F220
EN ISO 6506-3:2014 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014)
ISO 7619:1997 Rubber Determination of indentation hardness by means of pocket hardness meters
ISO 7966:1993 Acceptance control charts
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.