BS EN 13293:2002
Current
The latest, up-to-date edition.
Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide
Hardcopy , PDF
English
10-22-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials and heat treatment
5 Design
6 Construction and workmanship
7 New design tests
8 Batch tests
9 Tests on every cylinder
10 Failure to meet test requirements
11 Records
12 Identification marks
Annex A (informative) Description, evaluation of
manufacturing defects and conditions for
rejection of seamless steel gas cylinders
at time of visual inspection
Annex B (informative) Examples of design test and
batch test certificates
Annex C (informative) Guidance on the application
of conformity assessment modules when
using this standard
Bibliography
Gives minimum requirements for the material design, construction and workmanship, manufacturing processes and tests at manufacture of refillable seamless normalized gas cylinders made from carbon manganese steel of water capacities up to and including 0,5 litre for compressed, liquefiable and dissolved gases and up to 1 litre for carbon dioxide.
| Committee |
PVE/3/3
|
| DevelopmentNote |
Supersedes 98/711653 DC Partially supersedes BS 5045-6(1987) (11/2002)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This draft standard sets out minimum requirements for the material design, construction and workmanship, manufacturing processes and tests at manufacture of refillable seamless normalized gas cylinders made from carbon manganese steel of water capacities up to and including 0,5 litre for permanent, liquefiable and dissolved gases and up to 1 litre for carbon dioxide use only.
| Standards | Relationship |
| DIN EN 13293:2003-01 | Identical |
| EN 13293:2002 | Identical |
| NS EN 13293 : 1ED 2002 | Identical |
| SN EN 13293 : 2002 | Identical |
| NBN EN 13293 : 2003 | Identical |
| UNI EN 13293 : 2005 | Identical |
| I.S. EN 13293:2002 | Identical |
| NEN EN 13293 : 2002 | Identical |
| NF EN 13293 : 2003 | Identical |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN 1089-1 : 1996 | TRANSPORTABLE GAS CYLINDERS - GAS CYLINDER IDENTIFICATION (EXCLUDING LPG) - STAMPMARKING |
| ISO 11116-2:1999 | Gas cylinders 17E taper thread for connection of valves to gas cylinders Part 2: Inspection gauges |
| EN ISO 11116-1 : 1999 | GAS CYLINDERS - 17E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| EN ISO 11116-2 : 1999 | GAS CYLINDERS - 17E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 2: INSPECTION GAUGES |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 11116-1:1999 | Gas cylinders 17E taper thread for connection of valves to gas cylinders Part 1: Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.