BS EN 13261 : 2009
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
Hardcopy , PDF
09-10-2020
English
01-01-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Product definition
Annex A (normative) - Particular characteristics for axles of
steel grade EA1T and EA4T
Annex B (normative) - Standard wedge for measurement of
permeability to ultrasound
Annex C (normative) - Method to assess resistance to impact of
the coating
Annex D (normative) - Method to assess resistance to gritting
of the coating
Annex E (normative) - Method to assess the resistance of the
coating to specific corrosive products
Annex F (normative) - Method to assess the resistance of the
coating to cyclic mechanical stresses
Annex G (normative) - Measurement of the hydrogen content in
the steel for axles at the melting stage
Annex H (informative) - Drawings of test pieces
Annex I (informative) - Product qualification
Annex J (informative) - Product delivery
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2008/57/EC
Bibliography
Describes the characteristics of axles for use on European networks.
| Committee |
RAE/3/-/1
|
| DevelopmentNote |
Supersedes 98/706834 DC. (11/2003) Supersedes 06/30155635 DC. (05/2009) 2009 Edition Re-Issued in December 2010 & incorporates AMD 1 2010. (12/2010)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN 13261:2009 | Identical |
| SN EN 13261 : 2009 + A1 2010 | Identical |
| UNI EN 13261 : 2011 | Identical |
| NBN EN 13261 : 2009 + A1 2010 | Identical |
| NEN EN 13261 : 2009 + A1 2010 | Identical |
| EN 13261:2009+A1:2010 | Identical |
| NS EN 13261 : 2009 + A1 2010 | Identical |
| NF EN 13261 : 2009 + A1 2011 | Identical |
| DIN EN 13261:2011-01 | Identical |
| ONORM EN 13261 : 2012 | Identical |
| UNE-EN 13261:2009 | Identical |
| BS 5892-8:2012 | Railway rolling stock materials Railway applications. Wheelsets and bogies. Powered and non-powered wheelsets with inboard bearings. Product requirements |
| BS 5892-3(1992) : 1992 | RAILWAY ROLLING STOCK MATERIALS - PART 3: SPECIFICATION FOR MONOBLOC WHEELS FOR TRACTION AND TRAILING STOCK |
| BS 5892-6:1992 | Railway rolling stock materials Specification for wheelsets for traction and trailing stock |
| 11/30217674 DC : 0 | BS 5892-8 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - POWERED AND NON-POWERED WHEELSETS WITH INBOARD BEARINGS - PRODUCT REQUIREMENTS |
| BS 8535:2011 | Railway applications. Wheelsets and bogies. Powered and non-powered axles with inboard bearings. Design method |
| 10/30204582 DC : 0 | BS 8535 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - POWERED AND NON-POWERED AX LES WITH INBOARD JOURNAL BEARINGS - DESIGN METHOD |
| BS 5892-1(1992) : 1992 | RAILWAY ROLLING STOCK MATERIALS - PART 1: SPECIFICATION FOR AXLES FOR TRACTION AND TRAILING STOCK |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| EN 22768-2:1993 | General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 5948:1994 | Railway rolling stock material Ultrasonic acceptance testing |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| 2008/57/EC : 2008 AMD 5 2014 | DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE) |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| ISO 6933:1986 | Railway rolling stock material — Magnetic particle acceptance testing |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| EN 13104:2009+A2:2012 | Railway applications - Wheelsets and bogies - Powered axles - Design method |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 13260:2009+A1:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN 13103:2009+A2:2012 | Railway applications - Wheelsets and bogies - Non powered axles - Design method |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.