BS EN 13108-6:2016
Current
The latest, up-to-date edition.
Bituminous mixtures. Material specifications Mastic Asphalt
Hardcopy , PDF
English
06-30-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
4 Requirements for constituent materials
5 Requirements for the mixture
6 Assessment and verification of constancy of
performance - AVCP
7 Identification
Annex A (normative) - Calculations of the penetration or
the softening point of the binder of a mixture when
reclaimed asphalt is used
Annex ZA (informative) - Relationship of this European
Standard with Regulation (EU) No. 305/2011
Bibliography
Defines requirements for mixtures of the mix group Mastic Asphalt for use on roads, airfields and other trafficked areas.
| Committee |
B/510/1
|
| DevelopmentNote |
Supersedes 00/100955 DC. (06/2006) Supersedes 13/30278720 DC. (07/2016)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies requirements for mixtures of the mix group Mastic Asphalt for use on roads, airfields and other trafficked areas. Mastic Asphalt is used for surface courses, binder courses, protection layers and inter-layers for bridges, tunnels and troughs. The mixtures of the mix group Mastic Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard. This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN13108‑20 and EN13108‑21 .
| Standards | Relationship |
| UNE-EN 13108-6:2007 | Identical |
| EN 13108-6:2016 | Identical |
| I.S. EN 13108-6:2016 | Identical |
| UNI EN 13108-6 : 2006 | Identical |
| NF EN 13108-6 : 2006 | Identical |
| NS EN 13108-6 : 2006 | Identical |
| NEN EN 13108-6 : 2016 | Identical |
| NBN EN 13108-6 : 2016 | Identical |
| DIN EN 13108-6:2013-06 (Draft) | Identical |
| PD 6692:2018 | Asphalt. Guidance on the use of BS EN 12697 “Bituminous mixtures. Test methods” |
| 17/30360424 DC : 0 | BS PD 6692 - ASPHALT - GUIDANCE ON THE USE OF BS EN 12697 'BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT' |
| 14/30283621 DC : 0 | PD 6691:2015 - GUIDANCE ON THE USE OF BS EN 13108 BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| PD 6692:2006 | Asphalt. Guidance on the use of BS EN 12697 \'Bituminous mixtures. Test methods for hot mix asphalt\' |
| PD 6691:2010 | Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications |
| BS PD6691(2015) : 2015 | GUIDANCE ON THE USE OF BS EN 13108, BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| PD 6691:2007 | Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| EN 12970:2000 | Mastic asphalt for waterproofing - Definitions, requirements and test methods |
| EN 12697-1 : 2012 COR 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| EN 12697-43:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel |
| EN 12697-46:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests |
| EN 12697-8:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| 305/2011 : 2011 AMD 2 2014 | REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE) |
| EN 12697-25:2016 | Bituminous mixtures - Test methods - Part 25: Cyclic compression test |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 12697-41:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids |
| EN 12697-21:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens |
| EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
| EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
| EN 12697-20:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or cylindrical specimens (CY) |
| EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| EN 13108-21:2016 | Bituminous mixtures - Material specifications - Part 21: Factory Production Control |
| EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.