BS EN 13063-2:2005
Current
The latest, up-to-date edition.
Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods under wet conditions
Hardcopy , PDF
English
09-28-2007
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Shapes, dimensions and tolerances
5 Material requirements
6 Replacement of single components of the system
chimney
7 Designation
8 Product information
9 Marking and labelling
10 Evaluation of conformity
Annex A (normative) Test methods
Annex B (informative) Thermal resistance
Annex C (normative) Sampling procedures for an AQL of 10%
and inspection level S2
Annex ZA (informative) Clauses of this European Standard
addressing the provisions of the
EU Construction Products Directive
Bibliography
Describes the requirements and test methods for multiwall system chimneys working under wet conditions (in the following expressed as "wet chimney") with pressure type N1, N2 or P1 according to EN 1443 and a working temperature below or equal T600 according to EN 13063-1:2005+A1, in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners.
Committee |
B/506
|
DevelopmentNote |
Supersedes 02/104193 DC. (01/2006)
|
DocumentType |
Standard
|
Pages |
42
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard specifies the requirements and test methods for multiwall system chimneys working under wet conditions (in the following expressed as \'wet chimney\') with pressure type N1, N2 or P1 according to EN 1443 and a working temperature below or equal T600 according to prEN 13063-1, in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners. Marking and inspection are also covered by this document. This European Standard does not apply to structurally independent (free standing or self-supporting) system chimneys. The wet chimney may comprise the following appropriate components: clay/ceramic flue liners; insulation layer; outer walls; acid resistant mortar for jointing flue liners or elastomeric sealant; mortar for jointing outer walls; terminal; chimney base; condensate collector; condensate outlet; cladding; opening section; cleaning and inspection door; distance piece; reinforcement. The wet system chimney covers a combination of compatible chimney components, obtained or specified from one manufacturing source with product responsibility for the whole system chimney. NOTE This document does not cover soot fire resistance chimneys.
Standards | Relationship |
SN EN 13063-2 : 2005 + A1 2007 | Identical |
NS EN 13063-2 : 2005 + A1 2007 | Identical |
UNI EN 13063-2 : 2007 | Identical |
I.S. EN 13063-2:2005 | Identical |
UNE-EN 13063-2:2006 | Identical |
NF EN 13063-2 : 2005 + A1 2007 | Identical |
EN 13063-2:2005+A1:2007 | Identical |
NBN EN 13063-2 : 2005 + A1 2008 | Identical |
NEN EN 13063-2 : 2005 + A1 2007 | Identical |
DIN EN 13063-2:2007-10 | Identical |
BS 5410-1:2014 | Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes |
14/30285453 DC : 0 | BS 5410-1 - CODE OF PRACTICE FOR OIL FIRING - PART 1: INSTALLATIONS UP TO 45 KW OUTPUT CAPACITY FOR SPACE HEATING AND HOT WATER SUPPLY PURPOSES |
BS 5410-1:1997 | Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes |
EN 998-2:2016 | Specification for mortar for masonry - Part 2: Masonry mortar |
EN 13063-1:2005+A1:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance |
EN 13069:2005 | Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods |
EN 13216-1:2004 | Chimneys - Test methods for system chimneys - Part 1: General test methods |
EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
EN 12446:2011 | Chimneys - Components - Concrete outer wall elements |
EN 14241-1:2013 | Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
EN 13162:2012+A1:2015 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
EN 13384-1:2015 | Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance |
EN 1806:2006 | Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 1366-8:2004 | Fire resistance tests for service installations - Part 8: Smoke extraction ducts |
ISO 9001:2015 | Quality management systems — Requirements |
EN 1443:2003 | Chimneys - General requirements |
EN 14297:2004 | Chimneys - Freeze-thaw resistance test method for chimney products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.