• Shopping Cart
    There are no items in your cart

BS EN 13019 : 2001

Current

Current

The latest, up-to-date edition.

MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2001

US$242.23
Excluding Tax where applicable

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
  5.1 Elevating hoppers and powered discharge doors
       5.1.1 Multiple control systems
       5.1.2 Elevating hopper
       5.1.3 Movement
       5.1.4 Position of controls
       5.1.5 Stability
       5.1.6 Hoses and pipework
  5.2 Sweep gear
       5.2.1 Brushes and brooms
       5.2.2 Raising, lowering and slewing mechanisms
       5.2.3 Sweep gear illumination
       5.2.4 Sweep gear maintenance
  5.3 Access and walkways
  5.4 Controls
  5.5 Protection device
       5.5.1 Moving parts
       5.5.2 Hot surfaces
       5.5.3 Fumes, gases and dust particles
       5.5.4 Pipes and hoses
       5.5.5 Doors and panels
  5.6 Water systems
       5.6.1 Tanks
       5.6.2 Washing/flushing system
  5.7 Fuel and hydraulic tanks
  5.8 Hand-held cleaning devices/suction hoses
  5.9 Demountable machines and components
       5.9.1 Demountable components
       5.9.2 Supporting means for machines and
              components
       5.9.3 Disconnectable power and
              signal-transmitting systems
  5.10 Noise reduction by design
       5.10.1 Noise reduction at source
       5.10.2 Noise reduction by protective measures
       5.10.3 Noise reduction by information
  5.11 Reduction of vibration
6 Information for use
  6.1 Operating and maintenance instructions
  6.2 Spare parts list
7 Marking
8 Verification
Annex A (informative) - Terminology
Annex B (informative) - Hopper safety device
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC
Bibliography

Covers all significant hazards identified through a risk assessment pertinent to road surface cleaning machines when they are used as intended and under the conditions foreseen by the manufacturer.

Committee
B/513/1
DevelopmentNote
Supersedes 97/108362 DC. (03/2005) 2001 Edition Re-Issued in May 2009 & incorporates AMD 1 2008. Supersedes 08/30177207 DC. (05/2009)
DocumentType
Standard
Pages
28
PublisherName
British Standards Institution
Status
Current
Supersedes

EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
EN 500-1:2006+A1:2009 Mobile road construction machinery - Safety - Part 1: Common requirements
EN ISO 15667:2000 Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000)
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 15667:2000 Acoustics Guidelines for noise control by enclosures and cabins
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 12508:1994 Earth-moving machinery Operator station and maintenance areas Bluntness of edges
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 11688-2:2000 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998)
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 626-2:1996+A1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
EN 13021:2003+A1:2008 Winter service machines - Safety requirements
ISO 4148:2004 Road vehicles Special warning lamps Dimensions
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 13524:2003+A2:2014 Highway maintenance machines - Safety requirements
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
EN ISO 2867:2011 Earth-moving machinery - Access systems (ISO 2867:2011)
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 2867:2011 Earth-moving machinery Access systems
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
ISO 6750:2005 Earth-moving machinery Operator's manual Content and format

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.