BS EN 12953-7:2002
Current
The latest, up-to-date edition.
Shell boilers Requirements for firing systems for liquid and gaseous fuels for the boilers
Hardcopy , PDF
English
06-14-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Fuel supply
4.1 Fuel transfer and preparation
4.2 Fuel lines
4.3 Safety shut-off devices (Safety trip valves)
5 Air supply, air/fuel ratio
6 Firing system
6.1 Burners
6.2 Inspection openings
6.3 Purging, start-up and shutdown
6.4 Common stack for several firing systems
6.5 Fuels
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other provisions
of EU Directives
Bibliography
Defines requirements for firing systems for oil and gaseous fuels applicable to shell boilers as defined in EN 12953-1 irrespective of the degree of supervision.
| Committee |
PVE/2
|
| DevelopmentNote |
Supersedes 98/716517 DC (07/2002)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 12953-7:2002-08 | Identical |
| UNI EN 12953-7 : 2004 | Identical |
| NEN EN 12953-7 : 2002 | Identical |
| NF EN 12953-7 : 2002 | Identical |
| SN EN 12953-7 : 2002 | Identical |
| UNE-EN 12953-7:2003 | Identical |
| NS EN 12953-7 : 1ED 2002 | Identical |
| I.S. EN 12953-7:2002 | Identical |
| NBN EN 12953-7 : 2002 | Identical |
| EN 12953-7:2002 | Identical |
| EEMUA 193 : 2013 | MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT |
| EN 264 : 1991 | SAFETY SHUT OFF DEVICES FOR COMBUSTION PLANTS USING LIQUID FUELS - SAFETY REQUIREMENTS AND TESTING |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| EN 293:1992 | Oil pressure atomizing nozzles - Minimum requirements - Testing |
| EN 225 : 1987 | ATOMIZING OIL BURNERS - PUMPS WITH ROTATING SHAFT & EXTERNAL DRIVE - DIMENSIONS |
| EN 751-2:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
| PREN 50156-1 : DRAFT 2012 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| ISO 7-2:2000 | Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges |
| EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| EN 1044 : 1999 | BRAZING - FILLER METALS |
| EN 12953-1:2012 | Shell boilers - Part 1: General |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 3677:2016 | Filler metal for soldering and brazing — Designation |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 521:2006 | Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances |
| EN 230:2005 | Automatic burner control systems for oil burners |
| IEC 60730-2-5:2013+AMD1:2017 CSV | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
| EN 751-1:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
| EN 88:1991/A1:1996 | PRESSURE GOVERNORS FOR GAS APPLIANCES FOR INLET PRESSURE UP TO 200 MBAR |
| EN 226:1987/AC1:1987 | Atomizing oil burners - Connecting dimensions between burners and heat generators |
| EN 299:2009 | Oil pressure atomizing nozzles - Determination of the angle and spray characteristics |
| PREN 298 : DRAFT 2010 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.