BS EN 1293:1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
Hardcopy , PDF
01-31-2011
English
08-15-1999
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions, symbols and abbreviations
4 Functional and dimensional requirements
4.1 Dimensions of pipes and fittings
4.1.1 Nominal sizes
4.1.2 Internal diameters and limit deviations
4.2 Geometry of pipes
4.3 Geometry of fittings
4.3.1 General
4.3.2 Bends
4.3.3 Branches
4.4 Smoothness of bore
4.5 Appearance and soundness
4.6 Longitudinal bending moment resistance
4.7 Interconnection
4.8 Corrosion resistance
4.9 Abrasion resistance
4.10 Modification
4.11 Coatings and linings
4.12 Long-term behaviour
4.13 Durability
4.14 Sealing elements
4.15 Mechanical strength
4.16 Pressure classes for pipes, fittings and joints
4.17 Airtightness and watertightness
4.17.1 Seals for joints
4.17.2 Rigid joints
4.17.3 Adjustable joints
4.17.4 Flexible joints
4.18 Restrained joints
4.19 Temperature
4.20 Dimensional stability
5 Test methods
5.1 Measurement of diameters and wall thicknesses
5.1.1 Mean internal diameter of barrels
5.1.2 Mean external diameter of barrels
5.1.3 Wall thickness of barrels
5.2 Measurement of deviation from straightness of barrels
5.3 Measurement of deviation from squareness of the ends of the
pipes
5.4 Longitudinal bending moment resistance test for pipes
5.5 Crushing test for pipes with rigid behaviour
5.6 Stiffness test for pipes with flexible behaviour
5.7 Pressure tests
5.7.1 Tests for pipes
5.7.2 Test for joints
5.7.3 Test for restrained joints
5.8 Tests for fittings
6 Quality control
7 Marking
Annex A (informative) Examples for principles of pneumatically
pressurized waste water systems
Standard specifies general requirements for components for use in pneumatically pressurized discharge pipes, drains and sewers. Components covered are pipes, fittings, and joints.
| Committee |
B/505
|
| DevelopmentNote |
Supersedes 94/100721 DC. (09/2005)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 1293:2000 | Identical |
| NBN EN 1293 : 1999 | Identical |
| I.S. EN 1293:1999 | Identical |
| NS EN 1293 : 1ED 1999 | Identical |
| NF EN 1293 : 1999 | Identical |
| SN EN 1293 : 1999 | Identical |
| UNI EN 1293 : 2002 | Identical |
| NEN EN 1293 : 1999 | Identical |
| EN 1293:1999 | Identical |
| DIN EN 1293:1999-06 | Identical |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| EN 45011:1998 | General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| EN 45011 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO/IEC Guide 65:1996 | General requirements for bodies operating product certification systems |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.