BS EN 1254-5:1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Copper and copper alloys. Plumbing fittings Fittings with short ends for capillary brazing to copper tubes
Hardcopy , PDF
06-04-2021
English
06-15-1998
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions
3.1 plumbing fitting
3.2 capillary end
3.3 reducer (short end for capillary brazing to
copper tubes)
3.4 adaptor fitting
3.5 nominal diameter
4 Requirements
4.1 General
4.2 Materials
4.3 Dimensions and tolerances
4.4 Design and manufacture
4.5 Production test requirements
4.6 Type test requirements
5 Test methods
5.1 Assembly dimensions
5.2 Leaktightness under internal hydrostatic
pressure
5.3 Pressure test
5.4 Carbon in bore tests
5.5 Dezincification resistance test
5.6 Stress corrosion resistance test
6 Designation
7 Marking
7.1 General
7.2 Dezincification resistant copper-zinc alloys
8 Documentation
8.1 Declaration of conformity
8.2 User instructions
Annex A (normative) Carbon film test
Annex B (normative) Determination of mean depth of
dezincification
Annex C (informative) Bibliography
Defines materials, assembly dimensions and tolerances and test requirements for fittings of copper and copper alloys with or without plating. Also defines maximum permissible temperatures and pressures and defines connection end dimensions of short cup ends suitable for brazing only, in order to join copper tubes defined in EN 1057.
| Committee |
NFE/34
|
| DevelopmentNote |
Supersedes 94/700081 DC. (08/2005)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 1254-5 : 1998 | Identical |
| SN EN 1254-5 : 1998 | Identical |
| UNI EN 1254-5 : 2000 | Identical |
| DIN EN 1254-5:1998-03 | Identical |
| NS EN 1254-5 : 1ED 1998 | Identical |
| EN 1254-5:1998 | Identical |
| NF EN 1254-5 : 1998 | Identical |
| UNE-EN 1254-5:1999 | Identical |
| NEN EN 1254-5 : 1998 | Identical |
| NBN EN 1254-5 : 1998 | Identical |
| I.S. EN 1254-5:1998 | Identical |
| BS 5245:1975 | Specification for phosphoric acid based flux for soft soldered joints in stainless steel |
| 11/30228295 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING, OPERATION AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
| 13/30199128 DC : 0 | BS 6891 - SPECIFICATION FOR THE INSTALLATION AND MAINTENANCE OF LOW PRESSURE GAS INSTALLATION PIPEWORK OF UP TO 35 MM (R1[1/4]) IN PREMISES |
| BS 8558:2015 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| BS 6891:2015 | Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R1¼) on premises |
| BS 6891(2005) : 2005 | INSTALLATION OF LOW PRESSURE GAS PIPEWORK OF UP TO 35 MM (R1[1/4]) IN DOMESTIC PREMISES (2ND FAMILY GAS) - SPECIFICATION |
| 08/30188214 DC : 0 | BS 6700+A1 - DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CARTILAGES - SPECIFICATION |
| BS 8558:2011 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| 05/30086662 DC : DRAFT JAN 2005 | BS 6400-2 - SPECIFICATION FOR THE INSTALLATION, EXCHANGE, RELOCATION AND REMOVAL OF DOMESTIC-SIZED GAS METERS (2ND AND 3RD FAMILY GASES) - PART 2: MEDIUM PRESSURE (2ND FAMILY GASES) |
| 05/30116741 DC : DRAFT JUNE 2005 | BS 6891 - INSTALLATION OF LOW PRESSURE GAS PIPEWORK OF UP TO 35 MM (R1$9D) IN DOMESTIC PREMISES (2ND FAMILY GAS) - SPECIFICATION |
| 15/30299694 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
| BS 6400-1:2002 | Specification for installation of domestic-sized gas meters maximum rated capacity not exceeding 6 m<sup>3</sup>/h (2nd and 3rd family gases) Low pressure (2nd family gases) |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| EN 723:2009 | Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| EN ISO 6509:1995 | Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| PREN 12449 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.