BS EN 12484-2:2000
Current
The latest, up-to-date edition.
Irrigation techniques. Automatic turf irrigation systems Design and definition of typical technical templates
Hardcopy , PDF
English
09-15-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions and graphic symbols
3.1 Definitions
3.2 Graphic symbols for the plans
4 Automatic underground irrigation system design
4.1 Generalities
4.2 Information for all parties involved in the
automatic irrigation project
4.3 Elements of the project
4.4 Calculation notes regarding irrigation parameters
4.5 Note concerning protection devices
5 Calculation notes and technical economic basis
5.1 Estimated costing
5.2 Targeted investment cost
5.3 Estimated operating cost
5.4 Estimated costs versus targeted costs
Annex A (normative) Graphic symbols for the planes
This standard is intended to: - quantify and define the equipment and methods used as a basis for carrying out the installation of an automatic irrigation system; - set forth the information and requirements taken into account by the project manager for designing an automatic irrigation system and justify the technical decisions made.
| Committee |
W/-
|
| DevelopmentNote |
Supersedes 98/707685 DC. (08/2005)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 12484-2 : 2000 | Identical |
| NS EN 12484-2 : 1ED 2000 | Identical |
| I.S. EN 12484-2:2000 | Identical |
| EN 12484-2:2000 | Identical |
| UNE-EN 12484-2:2001 | Identical |
| NBN EN 12484-2 : 2000 | Identical |
| NF EN 12484-2 : 2000 | Identical |
| UNI EN 12484-2 : 2002 | Identical |
| DIN EN 12484-2:2000-08 | Identical |
| NEN EN 12484-2 : 2000 | Identical |
| EN 1452-5 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| HD 21-3 : S3 AMD 2 2008 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - NON-SHEATHED CABLES FOR FIXED WIRING |
| HD 21.5 S3:1994/A2:2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 5: FLEXIBLE CABLES (CORDS) |
| HD 21 PT9 : S2 AMD 1 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - SINGLE CORE NON-SHEATHED CABLE FOR INSTALLATION AT LOW TEMPERATURES |
| EN 50086-2-4:1994/A1:2001 | SPECIFICATION FOR CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR CONDUIT SYSTEMS BURIED UNDERGROUND |
| PREN 12201-3 : DRAFT 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS |
| HD 21.10 : 200S2 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - EXTENSIBLE LEADS |
| ISO 161-1:1996 | Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series |
| ISO 3501:2015 | Plastics piping systems Mechanical joints between fittings and pressure pipes Test method for resistance to pull-out under constant longitudinal force |
| ISO 3459:2015 | Plastic piping systems Mechanical joints between fittings and pressure pipes Test method for leaktightness under negative pressure |
| HD 21.1 : 200S4 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - GENERAL REQUIREMENTS |
| ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| HD 21 PT7 : S2 AMD 1 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - SINGLE CORE NON-SHEATHED CABLES FOR INTERNAL WIRING FOR A CONDUCTOR TEMPERATURE OF 90 DEGREES C |
| PREN 12201-1 : DRAFT 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| HD 21 PT13 : S1 AMD 1 2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - OIL RESISTANT PVC SHEATHED CABLES WITH TWO OR MORE CONDUCTORS |
| EN 1452-4 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 4: VALVES AND ANCILLARY EQUIPMENT |
| PREN 12201-5 : DRAFT 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| EN 1452-1 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| HD 21-2 : S3 AMD 1 2002 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - TEST METHODS |
| EN 1452-2 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
| HD 21 PT4 : 200S2 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 4: SHEATHED CABLES FOR FIXED WIRING |
| EN 1452-3 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: FITTINGS |
| PREN 12201-2 : DRAFT 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES |
| HD 21-12 : S1 AMD 1 2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - HEAT-RESISTANT FLEXIBLE CABLES (CORDS) |
| ISO 3458:2015 | Plastics piping systems Mechanical joints between fittings and pressure pipes Test method for leaktightness under internal pressure |
| ISO 3503:2015 | Plastics piping systems Mechanical joints between fittings and pressure pipes Test method for leaktightness under internal pressure of assemblies subjected to bending |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.