BS EN 12288:2010
Current
The latest, up-to-date edition.
Industrial valves. Copper alloy gate valves
Hardcopy , PDF
English
07-31-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test procedures
6 Declaration of compliance
7 Designation
8 Marking and preparation for storage and transportation
Annex A (normative) - Materials
Annex B (normative) - Pressure/temperature ratings
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 97/23/EC
Bibliography
Pertains to copper alloy gate valves for general use having flanged, threaded, capillary, compression or loose nut/union body ends.
| Committee |
PSE/18/2
|
| DevelopmentNote |
Partially supersedes BS 5154(1991) Supersedes 96/703940 DC (10/2003) Supersedes 09/30205880 DC. (08/2010)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard applies to copper alloy gate valves for general use having flanged, threaded, capillary, compression or loose nut/union body ends.
This European Standard specifies the design and performance requirements including materials, pressure/temperature ratings, dimensions, test procedures and marking.
For some specific fields of application, for example, drinking water or gas, valves to this European Standard can be used provided the requirements of the relevant performance standards are met. Approval by the relevant regulatory body may be required.
The range of nominal sizes is DN 8 to DN 500 and of nominal diameters is 8 mm to 110 mm.
The range of pressure designations covered is PN 6; PN 10; PN 16; PN 20; PN 25; PN 32; PN 40; PN 63; Class 150 and Class 300.
For the applicability of each nominal size/diameter and each pressure designation to the different types of valve end, see 4.1.
| Standards | Relationship |
| NS EN 12288 : 2010 | Identical |
| EN 12288:2010 | Identical |
| NEN EN 12288 : 2010 | Identical |
| NF EN 12288 : 2010 | Identical |
| NBN EN 12288 : 2010 | Identical |
| SN EN 12288 : 2010 | Identical |
| DIN EN 12288:2010-10 | Identical |
| I.S. EN 12288:2010 | Identical |
| UNI EN 12288 : 2010 | Identical |
| UNE-EN 12288:2010 | Identical |
| 14/30280636 DC : 0 | BS EN ISO 6509-2 - CORROSION OF METALS AND ALLOYS - DETERMINATION OF DEZINCIFICATION RESISTANCE OF COPPER ALLOYS WITH ZINC - PART 2: ACCEPTANCE CRITERIA |
| 15/30310921 DC : 0 | BS 1212-4 - FLOAT OPERATED VALVES - PART 4: SPECIFICATION FOR COMPACT TYPE FLOAT OPERATED VALVES FOR WC FLUSHING CISTERNS (INCLUDING FLOATS) |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| ISO 5210:2017 | Industrial valves — Multi-turn valve actuator attachments |
| EN ISO 5210:2017 | Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017) |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| EN 12167:2016 | Copper and copper alloys - Profiles and bars for general purposes |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element |
| EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| EN 19:2016 | Industrial valves - Marking of metallic valves |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.