BS EN 12184:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
Hardcopy , PDF
09-16-2022
English
05-31-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
CH/173/1
|
| DevelopmentNote |
Supersedes 95/563136 DC (08/2004) Supersedes 09/30193293 DC. (03/2010) Supersedes 11/30237926 DC. (05/2014)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard specifies requirements and test methods for electrically powered wheelchairs, including electrically powered scooters with three or more wheels, with a maximum speed not exceeding 15 km/h intended to carry one person of mass not greater than 300 kg. It also specifies requirements and test methods for battery chargers for wheelchairs and scooters. This European Standard does not apply in total to: - electrically powered wheelchairs intended for special purposes, such as sports, showering or toileting, - manual wheelchairs with handrim-activated power-assisted propulsion, - custom-made electrically powered wheelchairs, - electrically powered stand-up wheelchairs, - manual wheelchairs with add-on power kits used for propulsion and - electrically powered office chairs. NOTE Requirements for manually propelled wheelchairs are specified in EN 12183.
| Standards | Relationship |
| ONORM EN 12184 : 2014 | Identical |
| I.S. EN 12184:2014 | Identical |
| NS EN 12184 : 2014 | Identical |
| UNI EN 12184 : 2014 | Identical |
| NBN EN 12184 : 2014 | Identical |
| UNE-EN 12184:2014 | Identical |
| NEN EN 12184 : 2014 | Identical |
| NF EN 12184 : 2014 | Identical |
| EN 12184:2014 | Identical |
| SN EN 12184:2014 | Identical |
| DIN EN 12184:2014-06 | Identical |
| 13/30265897 DC : 0 | BS 8603 - CODE OF PRACTICE FOR WHEELCHAIR PASSPORT SCHEME |
| BS 6440:2011 | Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility. Specification |
| 04/30080998 DC : DRAFT JUL 2004 | BS 4751 - MOBILE SANITARY CHAIRS |
| BS 8603:2013 | Code of practice for wheelchair passport schemes |
| BS 5900:2012 | Powered homelifts with partially enclosed carriers and no liftway enclosures. Specification |
| BS 4751:2005 | Mobile sanitary chairs |
| 11/30194294 DC : 0 | BS 6440 - POWERED LIFTING PLATFORMS WITH NON-ENCLOSED LIFTWAYS FOR USE BY PERSONS WITH LIMITED MOBILITY - SPECIFICATION |
| 11/30194292 DC : 0 | BS 5900 - POWERED HOME LIFTS WITH FULLY OR PARTIALLY ENCLOSED CARS AND NO LIFT-WELL ENCLOSURES - SPECIFICATION |
| ISO 7176-10:2008 | Wheelchairs — Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs |
| ISO 7176-2:2017 | Wheelchairs — Part 2: Determination of dynamic stability of electrically powered wheelchairs |
| ISO 8191-2:1988 | Furniture — Assessment of ignitability of upholstered furniture — Part 2: Ignition source: match-flame equivalent |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 7193:1985 | Wheelchairs Maximum overall dimensions |
| ISO 7176-15:1996 | Wheelchairs — Part 15: Requirements for information disclosure, documentation and labelling |
| ISO 7176-1:2014 | Wheelchairs Part 1: Determination of static stability |
| ISO 7176-22:2014 | Wheelchairs — Part 22: Set-up procedures |
| EN 62304:2006/A1:2015 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015) |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| ISO 7176-3:2012 | Wheelchairs — Part 3: Determination of effectiveness of brakes |
| ISO 7176-7:1998 | Wheelchairs — Part 7: Measurement of seating and wheel dimensions |
| IEC 62304:2006+AMD1:2015 CSV | Medical device software - Software life cycle processes |
| 1995/16/EC : 1995 | DIRECTIVE 95/16/EC OF 29 JUNE 1995 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO LIFTS |
| ISO 7176-5:2008 | Wheelchairs — Part 5: Determination of dimensions, mass and manoeuvring space |
| ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
| ISO 7176-13:1989 | Wheelchairs — Part 13: Determination of coefficient of friction of test surfaces |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 7176-8:2014 | Wheelchairs Part 8: Requirements and test methods for static, impact and fatigue strengths |
| ISO 7176-21:2009 | Wheelchairs Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
| ISO 7176-19:2008 | Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| ISO 7176-11:2012 | Wheelchairs — Part 11: Test dummies |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 1021-2:2014 | Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.