BS EN 12167:2011
Current
The latest, up-to-date edition.
Copper and copper alloys. Profiles and bars for general purposes
Hardcopy , PDF
English
06-30-2011
European Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, packaging, labelling
Bibliography
Defines the composition, property requirements and dimensional tolerances for copper alloy profiles including L-, T-, U-shaped cross-sections, and bars, finally produced by drawing or extruding.
Committee |
NFE/34
|
DevelopmentNote |
Together with BS EN 12163 and BS EN 12164, supersedes BS 2874(1986) Supersedes 95/714534 DC (08/2004)
|
DocumentType |
Standard
|
Pages |
46
|
PublisherName |
British Standards Institution
|
Status |
Current
|
SupersededBy | |
Supersedes |
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy profiles including L-, T-, U-shaped cross-sections, and bars, finally produced by drawing or extruding.
This European Standard applies to profiles with L-, T- and U-shaped cross-sections which would fit within a circumscribing circle of a maximum 180 mm diameter and to bars with thicknesses from 3 mm up to and including 60 mm and with widths from 6 mm up to and including 120 mm.
The sampling procedures, the methods of test for verification of conformity to the requirements of this European Standard, are also specified.
Standards | Relationship |
EN 12167:2011 | Identical |
NF EN 12167 : 2016 | Identical |
DIN EN 12167:2015-12 (Draft) | Identical |
I.S. EN 12167:2016 | Identical |
SN EN 12167 : 2016 | Identical |
EN 12167:2016 | Identical |
NS EN 12167 : 2016 | Identical |
NEN EN 12167 : 2016 | Identical |
UNI EN 12167 : 2011 | Identical |
UNE-EN 12167:2017 | Identical |
NBN EN 12167 : 2011 | Identical |
DIN EN 12167:1998-04 | Identical |
DEFSTAN 66-2(PT2)/2(2007) : 2007 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
11/30243193 DC : 0 | BS 750 - SPECIFICATION FOR UNDERGROUND FIRE HYDRANTS AND SURFACE BOX FRAMES AND COVERS |
12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
BS 746:2014 | Specification for gas meter unions and adaptors |
DEFSTAN 02-835/2(2011) : 2011 | REQUIREMENTS FOR HIGH STRENGTH COPPER NICKEL MANGANESE ALLOY FORGINGS, FORGING STOCK, RODS AND SECTIONS |
BS 7430(2011) : 2011 | CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
DEFSTAN 05-50(PT61)/2(2003) : 2003 AMD 1 2003 | METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 61: METHODS FOR TESTING GAS TURBINE ENGINE SYNTHETIC LUBRICANTS |
05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
13/30260276 DC : 0 | BS 5642-2:1983+A1 - SILLS AND COPINGS - PART 2: SPECIFICATION FOR COPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
13/30260274 DC : 0 | BS 5642-1:1978/A1 - SILLS AND COPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS 750:2012 | Specification for underground fire hydrants and surface box frames and covers |
BS 746(2005) : 2005 | SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
BS 6180:1999 | Barriers in and about buildings. Code of practice |
BS 7654:2010 | Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture |
BS 6180:2011 | Barriers in and about buildings. Code of practice |
BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
BS 750:2006 | Specification for underground fire hydrants and surface box frames and covers |
DEFSTAN 02-780(PT2)/2(2009) : 2009 | REQUIREMENTS FOR 70/30 COPPER NICKEL ALLOY MATERIAL - PART 2: FORGINGS, FORGE STOCK RODS AND SECTIONS |
DEFSTAN 02-879(PT2)/1(2011) : 2011 | REQUIREMENTS FOR COPPER ALLOY MATERIALS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS 2456:1990 | Specification for floats (plastics) for float operated valves for cold water services |
12/30243876 DC : DRAFT JULY 2012 | BS 746 - SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
DEFSTAN 66-2(PT2)/1(2005) : 2005 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
09/30181290 DC : 0 | BS 7654 - SPECIFICATION FOR SINGLE-PHASE STREET LIGHTING FUSES (CUT-OUTS) FOR LOW-VOLTAGE PUBLIC ELECTRICITY DISTRIBUTION SYSTEMS - 25 A RATING FOR HIGHWAY POWER SUPPLIES AND STREET FURNITURE |
16/30353337 DC : 0 | PD 5500:2015+A3 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
DEFSTAN 02-743(PT5)/2(2012) : 2012 | PIPE MANIPULATION - PART 5: BRAZING |
DEFSTAN 02-833(PT2)/3(2011) : 2011 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
10/30212801 DC : 0 | BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE |
11/30249994 DC : DRAFT JULY 2011 | BS 7430 - CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
04/30043993 DC : DRAFT APR 2004 | BS 746 - SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
DEFSTAN 02-179/1(2002) : 2002 | REQUIREMENTS FOR LOCKERS (MAGAZINE, RU MAGAZINE AND DETONATOR) USED FOR STORAGE OF EXPLOSIVE STORES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-833(PT2)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
EN 14977:2006 | Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ISO 6509-1:2014 | Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method |
EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
EN 1412:2016 | Copper and copper alloys - European numbering system |
ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 1173:2008 | Copper and copper alloys - Material condition designation |
EN ISO 6509-1:2014 | Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 80000-1:2009 | Quantities and units — Part 1: General |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 4739:1985 | Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing |
ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.