BS EN 12166:2011
Current
The latest, up-to-date edition.
Copper and copper alloys. Wire for general purposes
Hardcopy , PDF
English
06-30-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, packaging, labelling
Annex A (informative) - Position of wire cross-section
within a coil, reel, spool or drum
Bibliography
Defines the composition, property requirements and dimensional tolerances for copper alloy wire, finally produced by drawing, rolling or extruding, intended for general purposes, spring and fastener manufacturing applications.
| Committee |
NFE/34
|
| DevelopmentNote |
Supersedes BS 2786(1963), BS 2873(1969) and 95/714531 DC. (08/2004)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy wire, finally produced by drawing, rolling or extruding, intended for general purposes, spring and fastener manufacturing applications.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
| Standards | Relationship |
| EN 12166:2011 | Identical |
| DIN EN 12166:2015-12 (Draft) | Identical |
| NF EN 12166 : 2016 | Identical |
| UNI EN 12166 : 2011 | Identical |
| NEN EN 12166 : 2016 | Identical |
| I.S. EN 12166:2016 | Identical |
| SN EN 12166 : 2016 | Identical |
| EN 12166:2016 | Identical |
| UNE-EN 12166:2017 | Identical |
| NS EN 12166 : 2016 | Identical |
| NBN EN 12166 : 2011 | Identical |
| DIN EN 12166:1998-04 | Identical |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| DEFSTAN 07-207/2(2009) : 2009 | REQUIREMENTS FOR PADLOCKS (GENERAL PURPOSE) |
| 12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
| BS 2A 260-2A 265:2010 | Specification for pan and 100° countersunk slotted head screws with ISO metric screw threads |
| 13/30260276 DC : 0 | BS 5642-2:1983+A1 - SILLS AND COPINGS - PART 2: SPECIFICATION FOR COPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 6883:1999 | Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
| BS 7917:1999 | Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods |
| BS 2B 33:2001 | Copper-beryllium alloy wire and springs (solution treated and precipitation treated) |
| 15/30281806 DC : 0 | BS A 401 TO A 420 - AEROSPACE SERIES - SPECIFICATION FOR SCREWS, PAN AND 100 DEGREES COUNTERSUNK HEAD, HEXALOBULAR DRIVE RECESS (UNIFIED THREADS BELOW 1/4 INCH), VARIOUS MATERIALS |
| 13/30274750 DC : 0 | BS 2A 204 ETC+A3 - SPECIFICATIONS FOR MACHINE SCREWS AND NUTS (UNIFIED THREADS) BELOW 1/4 INCH FOR AERONAUTICAL PURPOSES |
| BS A 401-420:2015 | Specification for screws, pan and 100° countersunk head, hexalobular drive recess (unified threads below ¼ inch) in various materials |
| BS 3B 33:2009 | Specification for copper-beryllium alloy wire(solution treated and precipitation treated) |
| 09/30181211 DC : 0 | BS 3B 33 - SPECIFICATION FOR COPPER-BERYLLIUM ALLOY WIRE (SOLUTION TREATED AND PRECIPITATION TREATED) |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 2624:1990 | Copper and copper alloys — Estimation of average grain size |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 2624:1995 | Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.