BS EN 12164:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Copper and copper alloys. Rod for free machining purposes
Hardcopy , PDF
07-31-2016
English
06-30-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Requirements
6 Sampling
7 Test methods
8 Declaration of conformity and inspection documentation
9 Marking, packaging, labelling
Bibliography
Defines the composition, property requirements and dimensional tolerances for copper alloy rod, in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding, especially intended for free machining purposes.
| Committee |
NFE/34
|
| DevelopmentNote |
Together with BS EN 12163 and BS EN 12167 supersedes BS 2874(1986). (12/2000) Supersedes 95/714529 DC. (08/2005)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod, in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding, especially intended for free machining purposes.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
| Standards | Relationship |
| EN 12164:2011 | Identical |
| UNE-EN 12164:2017 | Identical |
| UNI EN 12164 : 2011 | Identical |
| NF EN 12164 : 2016 | Identical |
| DIN EN 12164:2015-12 (Draft) | Identical |
| EN 12164:2016 | Identical |
| NEN EN 12164 : 2016 | Identical |
| SN EN 12164 : 2016 | Identical |
| I.S. EN 12164:2016 | Identical |
| NS EN 12164 : 2016 | Identical |
| NBN EN 12164 : 2011 | Identical |
| DIN EN 12164:2000-09 | Identical |
| DEFSTAN 66-2(PT2)/2(2007) : 2007 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| 11/30243193 DC : 0 | BS 750 - SPECIFICATION FOR UNDERGROUND FIRE HYDRANTS AND SURFACE BOX FRAMES AND COVERS |
| 12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
| BS 746:2014 | Specification for gas meter unions and adaptors |
| BS 750:2012 | Specification for underground fire hydrants and surface box frames and covers |
| BS 746(2005) : 2005 | SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
| BS 7654:2010 | Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture |
| BS 6180:2011 | Barriers in and about buildings. Code of practice |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
| BS 750:2006 | Specification for underground fire hydrants and surface box frames and covers |
| 10/30213423 DC : 0 | BS 8537 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - SPECIFICATION FOR FITTINGS WITH PRESS ENDS FOR METALLIC TUBES |
| 15/30281806 DC : 0 | BS A 401 TO A 420 - AEROSPACE SERIES - SPECIFICATION FOR SCREWS, PAN AND 100 DEGREES COUNTERSUNK HEAD, HEXALOBULAR DRIVE RECESS (UNIFIED THREADS BELOW 1/4 INCH), VARIOUS MATERIALS |
| BS 2456:1990 | Specification for floats (plastics) for float operated valves for cold water services |
| 12/30243876 DC : DRAFT JULY 2012 | BS 746 - SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
| DEFSTAN 66-2(PT2)/1(2005) : 2005 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
| 09/30181290 DC : 0 | BS 7654 - SPECIFICATION FOR SINGLE-PHASE STREET LIGHTING FUSES (CUT-OUTS) FOR LOW-VOLTAGE PUBLIC ELECTRICITY DISTRIBUTION SYSTEMS - 25 A RATING FOR HIGHWAY POWER SUPPLIES AND STREET FURNITURE |
| DEFSTAN 02-743(PT5)/2(2012) : 2012 | PIPE MANIPULATION - PART 5: BRAZING |
| 10/30212801 DC : 0 | BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE |
| 13/30274750 DC : 0 | BS 2A 204 ETC+A3 - SPECIFICATIONS FOR MACHINE SCREWS AND NUTS (UNIFIED THREADS) BELOW 1/4 INCH FOR AERONAUTICAL PURPOSES |
| DEFSTAN 02-375/2(2017) : 2017 | VALVE DESIGN AND MANUFACTURE |
| BS A 401-420:2015 | Specification for screws, pan and 100° countersunk head, hexalobular drive recess (unified threads below ¼ inch) in various materials |
| 10/30234053 DC : 0 | BS A 275-A 276 + A2 - HEXAGON SELF-LOCKING NUTS WITH NON-METALLIC LOCKING INSERTS - METRIC SERIES |
| BS 8537:2010 | Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes |
| 04/30043993 DC : DRAFT APR 2004 | BS 746 - SPECIFICATION FOR GAS METER UNIONS AND ADAPTORS |
| DEFSTAN 02-522/2(2004) : 2004 | VERSATILE CONSOLE SYSTEM (VCS) ENGINEERING MANUAL - CATEGORY 2 |
| DEFSTAN 02-179/1(2002) : 2002 | REQUIREMENTS FOR LOCKERS (MAGAZINE, RU MAGAZINE AND DETONATOR) USED FOR STORAGE OF EXPLOSIVE STORES IN HM SURFACE SHIPS AND SUBMARINES |
| BS A275,A276,A277,A278,A279,A280(1981) : 1981 | AEROSPACE SERIES - SPECIFICATION FOR HEXAGON SELF-LOCKING NUTS WITH NON-METALLIC LOCKING INSERTS - METRIC SERIES |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 14977:2006 | Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 6509-1:2014 | Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 6509-1:2014 | Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.