BS EN 12158-1 : 2000
Current
Current
The latest, up-to-date edition.
BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2000
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements and/or measures
6 Verification
7 User information
Annex A (normative) - European stormwind map
Annex B (normative) - Electric safety devices
Annex C (informative) - User requirements for different
types of hoists
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Covers power operated temporarily installed builders hoists (referred to as "hoists" in this standard) intended for use by persons who are permitted to enter sites of engineering and construction.
| Committee |
MHE/6
|
| DevelopmentNote |
Supersedes 95/715416 DC. (08/2004) 2000 Edition Re-Issued in August 2010 & incorporates AMD 1 2010. (08/2010)
|
| DocumentType |
Standard
|
| Pages |
66
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ONORM EN 12158-1 : 2011 | Identical |
| NF EN 12158-1 : 2000 + A1 2010 | Identical |
| NS EN 12158-1 : 2000 + A1 2010 | Identical |
| NEN EN 12158-1 : 2000 + A1 2010 | Identical |
| EN 12158-1:2000+A1:2010 | Identical |
| UNE-EN 12158-1:2001 | Identical |
| NBN EN 12158-1 : 2001 + A1 2010 | Identical |
| DIN EN 12158-1:2011-06 | Identical |
| I.S. EN 12158-1:2000 | Identical |
| SN EN 12158-1 : 2001 + A1 2010 | Identical |
| UNI EN 12158-1 : 2010 | Identical |
| 05/30127565 DC : DRAFT DEC 2005 | BS 7212 - SAFE USE OF CONSTRUCTION HOISTS - CODE OF PRACTICE |
| BS 7212:2016 | Code of practice for the safe use of construction hoists |
| BS 8460:2017 | Code of practice for the safe use of MEWPS |
| BS 7981:2017 | Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs) |
| 17/30341837 DC : 0 | BS 8460 - CODE OF PRACTICE FOR THE SAFE USE OF MEWPS |
| 15/30320228 DC : 0 | BS 7212 - CODE OF PRACTICE FOR THE SAFE USE OF CONSTRUCTION HOISTS |
| BS 7981:2002 | Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs) |
| 17/30342358 DC : 0 | BS 7981 - CODE OF PRACTICE FOR THE INSTALLATION, MAINTENANCE, THOROUGH EXAMINATION AND SAFE USE OF MAST CLIMBING WORK PLATFORMS (MCWPS) |
| BS 7212:2006 | Code of practice for the safe use of construction hoists |
| ISO 2408:2017 | Steel wire ropes — Requirements |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| ISO 4302:2016 | Cranes — Wind load assessment |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 81-1:1998+A3:2009 | Safety rules for the construction and installation of lifts - Part 1: Electric lifts |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN 12158-2:2000+A1:2010 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 4309:2010 | Cranes Wire ropes Care and maintenance, inspection and discard |
| EN 60947-4-1 : 2010 AMD 1 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 81-2 : 1998 + A3 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.