BS EN 10169-2:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Continuously organic coated (coil coated) steel flat products Products for building exterior applications
Hardcopy , PDF
12-31-2010
English
05-31-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Information to be supplied by the purchaser
6 Requirements
7 Testing
8 Marking
9 Packing and despatch
10 Storage
11 Disputes
Annex A (informative) Types of atmosphere (see also
EN ISO 12944-2)
Annex B (informative) Outdoor exposure sites
Bibliography
Provides the specific requirements for continuously organic coated (coil coated) steel flat products used for building exterior applications. It particularly specifies the performance requirements.
| Committee |
ISE/109
|
| DevelopmentNote |
Supersedes DD ENV 10169-2. (05/2006)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 10169-2 : 2006 | Identical |
| EN 10169-2:2006 | Identical |
| NBN EN 10169-2 : 2006 | Identical |
| I.S. EN 10169-2:2006 | Identical |
| UNE-EN 10169-2:2007 | Identical |
| NEN EN 10169-2 : 2006 | Identical |
| SN EN 10169-2 : 2006 | Identical |
| UNI EN 10169-2 : 2007 | Identical |
| NS EN 10169-2 : 1ED 2006 | Identical |
| DIN EN 10169-2:2006-07 | Identical |
| ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
| EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
| EN 10079:2007 | Definition of steel products |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
| EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 606:2004 | Bar coding - Transport and handling labels for steel products |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.