BS EN 10149-1:2013
Current
The latest, up-to-date edition.
Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions
Hardcopy , PDF
English
09-30-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Dimensions, mass and tolerances
6 Classification and designation
7 Technical requirements
8 Inspection and testing
9 Marking
10 Disputes
11 Options
Bibliography
Describes requirements for flat products made of weldable, hot-rolled, high yield strength alloy quality and special steels for cold forming.
| Committee |
ISE/103
|
| DevelopmentNote |
Supersedes BS 1449-1.4(1991) (07/2004) Supersedes 93/307662 DC. (07/2005) Supersedes 11/30239491 DC. (10/2013)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
1.1
This European Standard specifies requirements for flat products made of weldable, hot-rolled, high yield strength alloy quality and special steels for cold forming.
EN10149-1 specifies the general delivery conditions.
EN10149-2 specifies the delivery conditions for thermomechanically rolled steels in the grades given in Table1 (chemical composition) and Table2 (mechanical properties) of Part2.
EN10149-3 specifies the delivery conditions for normalised or normalised rolled steels in the grades given in Table1 (chemical composition) and Table2 (mechanical properties) of Part3.
1.2
This European Standard does not apply to products for pressure vessels and products for which other European Standards exist or European Standards dealing with steels for general structural applications are being prepared:
Hot-rolled products of structural steels (see EN10025 parts1 to 6);
Hot finished structural hollow sections of non-alloy and fine grain steels (see EN10210-1).
| Standards | Relationship |
| EN 10149-1:2013 | Identical |
| NEN EN 10149-1 : 2013 | Identical |
| NF EN 10149-1 : 2013 | Identical |
| NBN EN 10149-1 : 2013 | Identical |
| UNE-EN 10149-1:2014 | Identical |
| UNI EN 10149-1 : 2013 | Identical |
| NS EN 10149-1 : 2013 | Identical |
| I.S. EN 10149-1:2013 | Identical |
| SN EN 10149-1 : 2013 | Identical |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10025-4:2004 | Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 10149-2:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
| ISO 7438:2016 | Metallic materials Bend test |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10025-5:2004 | Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10025-6:2004+A1:2009 | Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| EN 10020:2000 | Definition and classification of grades of steel |
| CEN/TR 10347:2006 | Guidance for forming of structural steels in processing |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN 10160:1999 | Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| EN 10149-3:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels |
| EN ISO 7438:2016 | Metallic materials - Bend test (ISO 7438:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.