BS EN 1011-1:2009
Current
Current
The latest, up-to-date edition.
Welding. Recommendations for welding of metallic materials General guidance for arc welding
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
03-31-2009
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles
4.1 General
4.2 Fundamental information for fabrication
4.3 Non-conformance and corrective actions
5 Requirements on welding production
5.1 Equipment and devices
5.2 Workplace
5.3 Personnel
5.4 Welding processes
5.5 Sub-contracting
6 Parent metals and welding consumables
6.1 Storage and handling
6.2 Material certificates
7 Planning
7.1 Information on drawings
7.2 Assembly for welding
7.3 Run-on and run-off plates
7.4 Temporary attachments
7.5 Fabrication and inspection feasibility
7.6 Welding procedure specification
7.7 Weld sequence
8 Welding fabrication
8.1 Welding instructions
8.2 Joint preparation and surface cleaning
8.3 Preheating
8.4 Arc strikes
8.5 Tack welds
8.6 Weld run sequence
8.7 Heat input
8.8 Protection against oxidation
8.9 Weld imperfections
8.10 Traceability
9 Elimination of distortion or inherent stresses
10 Post-weld heat treatment
11 Surface cleaning and treatment
12 Inspection and documentation
Bibliography
Provides guidance for the arc welding of metallic materials in all forms of product (e.g. cast, wrought, extruded, forged).
| Committee |
WEE/0
|
| DevelopmentNote |
Together with BS EN 1011-2, supersedes BS 5135(1984) (04/2001) Supersedes 93/702956 DC (11/2002) Supersedes 07/30158903 DC. (03/2009)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard contains general guidance for the arc welding of metallic materials in all forms of product (e.g. cast, wrought, extruded, forged).
The processes and techniques referred to in this Part of EN 1011 may not all be relevant to all materials. Additional information relevant to specific materials is given in the relevant Parts of the Standard.
| Standards | Relationship |
| NEN EN 1011-1 : 2009 | Identical |
| NS EN 1011-1 : 2009 | Identical |
| UNE-EN 1011-1:2010 | Identical |
| DIN EN 1011-1:2009-07 | Identical |
| SN EN 1011-1 : 2009 | Identical |
| I.S. EN 1011-1:2009 | Identical |
| NF EN 1011-1 : 2009 | Identical |
| NBN EN 1011-1 : 2009 | Identical |
| UNI EN 1011-1 : 2009 | Identical |
| EN 1011-1:2009 | Identical |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| 06/30139515 DC : DRAFT MAY 2006 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL FENCES |
| 16/30338305 DC : 0 | BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS - SPECIFICATION |
| 12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
| DEFSTAN 02-177/2(2002) : 2002 AMD 1 2002 | REQUIREMENTS FOR THE MANUFACTURE, TEST AND IDENTIFICATION FOR ITEMS OF SMITHS WORK |
| BS 8548:2017 | Guidance for arc welding of reinforcing steel |
| 17/30349707 DC : DRAFT AUG 2017 | BS 5975:2018 - CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| BS 1722-1:2006 | Fences Specification for chain link fences |
| BS 1722-14:2017 | Fences Specification for open mesh steel panel |
| BS 5975(2008) : 2008 | CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| BS 7668:2004 | Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification |
| BS 8297:2017 | Design, manufacture and installation of architectural precast concrete cladding. Code of practice |
| BS 7668:2016 | Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification |
| BS 1722-14:2006 | Fences Specification for open mesh steel panel fences |
| BS 1722-12:2016 | Fences Steel palisade fences. Manufacturing and installation. Specification |
| BS 1722-12:2006 | Fences Specification for steel palisade fences |
| DEFSTAN 81-086/5(2022):2022 | Metal Fittings for Wooden Containers |
| BS 1722-8:2006 | Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles |
| 07/30160560 DC : DRAFT JAN 2007 | PD 5500 AMD 2 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| 06/30094368 DC : DRAFT JAN 2006 | BS 4592-5 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 5: SOLID PLATES IN METAL AND GLASS REINFORCED PLASTICS (GRP) - SPECIFICATION |
| DEFSTAN 81-86/3(2007) : 2007 | METAL FITTINGS FOR WOODEN CONTAINERS |
| DEFSTAN 02-706/2(2010) : 2010 | WELDING & FABRICATION OF SHIP STRUCTURE FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| 08/30162761 DC : DRAFT AUG 2008 | BS 499-1 - WELDING TERMS AND SYMBOLS - PART 1: GLOSSARY FOR WELDING, BRAZING AND THERMAL CUTTING |
| 05/30113263 DC : DRAFT FEB 2005 | BS 7775 - SPECIFICATION FOR PENSTOCKS |
| DEFSTAN 07-85(PT1)/3(2006) : 2006 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| 02/703583 DC : DRAFT FEB 2002 | BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS |
| BS PD5500(2015) : 2015 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 7775:2005 | Penstocks for use in water and other liquid flow applications. Specification |
| BS 4515-1:2004 | Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines |
| BS 7608(2014) : 2014 | GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS |
| BS 4592-5:2006 | Industrial type flooring and stair treads Solid plates in metal and glass reinforced plastics (GRP). Specification |
| BS 4515-1:2009 | Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines |
| BS 799-5:2010 | Oil burning equipment Carbon steel oil storage tanks. Specification |
| BS 6180:2011 | Barriers in and about buildings. Code of practice |
| BS 5950-2:2001 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS |
| BS 8110-1:1997 | Structural use of concrete Code of practice for design and construction |
| 17/30341308 DC : DRAFT JUNE 2017 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL |
| 17/30342957 DC : 0 | BS 8297 - DESIGN, MANUFACTURE AND INSTALLATION OF ARCHITECTURAL PRECAST CONCRETE CLADDING - CODE OF PRACTICE |
| DEFSTAN 81-086/4(2017) : 2017 | FITTINGS METAL AND HANDLES FOR CONTAINERS |
| 06/30139509 DC : DRAFT MAY 2006 | BS 1722-10 - FENCES - PART 10: SPECIFICATION FOR ANTI-INTRUDER FENCES IN CHAIN LINK AND WELDED MESH |
| BS 499-1:2009 | Welding terms and symbols Glossary for welding, brazing and thermal cutting |
| 13/30102062 DC : 0 | BS 7608:2013 - GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS |
| 16/30337162 DC : 0 | BS 8548 - GUIDANCE FOR ARC WELDING OF REINFORCING STEEL |
| DEFSTAN 02-857/2(2010) : 2010 | REQUIREMENTS FOR THE WELDING OF CAST IRON |
| 07/30150912 DC : 0 | BS 5975 - CODE OF PRACTICE FOR THE PROCEDURAL CONTROL OF TEMPORARY WORKS AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
| 16/30325063 DC : 0 | BS 1722-12 - FENCES - PART 12: STEEL PALISADE FENCES - MANUFACTURING AND INSTALLATION - SPECIFICATION |
| BS 5400-3:2000 | Steel, concrete and composite bridges Code of practice for design of steel bridges |
| BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 1722-2:2006 | Fences Specification for strained wire and wire mesh netting fences |
| ASME STP-PT-058 : 2013 | TEMPER BEAD QUALIFICATION HARDNESS ACCEPTANCE CRITERIA |
| ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements |
| EN ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005) |
| ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
| ISO 9606-4:1999 | Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys |
| EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements |
| ISO 9606-5:2000 | Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys |
| ISO 17662:2016 | Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities |
| EN ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005) |
| EN 1011-7:2004 | Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
| ISO 14731:2006 | Welding coordination Tasks and responsibilities |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN ISO 9606-4:1999 | Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
| ISO 15609-3:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 3: Electron beam welding |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| IEC TS 62081:1999 | Arc welding equipment - Installation and use |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
| EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| EN ISO 3834-5:2015 | Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015) |
| EN ISO 14731:2006 | Welding coordination - Tasks and responsibilities (ISO 14731:2006) |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN 1011-5:2003 | Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel |
| EN ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005) |
| ISO 14175:2008 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
| EN ISO 9606-5:2000 | Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
| EN ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009) |
| CEN/TR 14599:2005 | Terms and definitions for welding purposes in relation with EN 1792 |
| EN ISO 15609-3:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedures specification - Part 3: Electron beam welding (ISO 15609-3:2004) |
| EN 1792:2003 | Welding - Multilingual list of terms for welding and related processes |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| ISO 13916:2017 | Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
| ISO 3834-5:2015 | Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 |
| ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding |
| ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| EN ISO 9606-3:1999 | Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
| ISO 9606-3:1999 | Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN ISO 14175:2008 | Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.