BS EN 10095 : 1999-07
Current
The latest, up-to-date edition.
HEAT RESISTING STEELS AND NICKEL ALLOYS
07-01-1999
Foreword
1 Scope
2 Normative references
3 Definitions
4 Classification and designation
4.1 Classification
4.2 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
6 Manufacturing process
6.1 General
6.2 Delivery condition
7 Requirements
7.1 General
7.2 Chemical composition
7.3 Mechanical properties
7.4 Surface quality
7.5 Dimensions and tolerances on dimensions
7.6 Calculation of mass and tolerances on mass
8 Inspection and testing
8.1 General
8.2 Types and contents of inspection documents
8.3 Specific inspection and testing
8.4 Test methods
8.5 Retest
9 Marking
Annex A (informative) Applicable dimensional standards
Annex B (informative) Technical information on heat
resisting steels and nickel alloys
Annex C (informative) Bibliography
Annex D (informative) Grades from EN 10088-1 and
prEN 10028-7 used as heat resisting
steels
Defines grades of wrought steels and nickel alloys normally used for products where the main requirement is resistance to the effects of hot gases and products of combustion at temperatures higher than 500 deg.C.
| Committee |
ISE/30
|
| DevelopmentNote |
Partially Supersedes BS 970-1(1996). Supersedes 96/703012 DC. (08/1999) Reviewed and confirmed by BSI, April, 2004. (11/2004) Together with BS EN 10051, BS EN 10029, BS EN 10048 and BS EN 10088-2, supersedes BS 1449-2(1983). (02/2008)
|
| DocumentType |
Standard
|
| ProductNote |
Partially Supersedes BS 970-1(1996). Supersedes 96/703012 DC. (EJB 08/1999) Reviewed and confirmed by BSI, April, 2004. (SND 11/2004) Together with BS EN 10051, BS EN 10029, BS EN 10048 and BS EN 10088-2, supersedes BS 1449-2(1983). (Allwyn 02/2008)
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 10095 : 1999 | Identical |
| NEN EN 10095 : 1999 | Identical |
| NBN EN 10095 : 1999 COR 2001 | Identical |
| NS EN 10095 : 1ED 1999 | Identical |
| DIN EN 10095:1999-05 | Identical |
| I.S. EN 10095:1999 | Identical |
| UNE-EN 10095:2000 | Identical |
| SN EN 10095 : 1999 CORR 2001 | Identical |
| EN 10095:1999 | Identical |
| UNI EN 10095 : 2001 | Identical |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| PREN 10222-5 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| EN 10221:1995 | Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN 10002-5:1991 | Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature |
| PREN 10272 : DRAFT 2013 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| PREN 10028-7 : DRAFT 2013 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS |
| EURONORM 60 : 1977 | HOT-ROLLED ROUND STEEL FOR GENERAL USE |
| EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
| EURONORM 65 : 1980 | HOT-ROLLED ROUND STEEL FOR SCREWS AND RIVETS |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EURONORM 61 : 1982 | HOT-ROLLED HEXAGON STEEL |
| EURONORM 58 : 1978 | HOT-ROLLED FLAT STEEL FOR GENERAL USE |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EURONORM 168 : 1986 | IRON AND STEEL PRODUCTS - INSPECTION DOCUMENTS, CONTENTS |
| EN 10003-1 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD |
| PREN 10263-5 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STAINLESS STEELS |
| EURONORM 59 : 1978 | HOT-ROLLED SQUARE STEEL FOR GENERAL USE |
| EN 10258 : 1997 | COLD-ROLLED STAINLESS STEEL AND NARROW STRIP AND CUT LENGTHS - TOLERANCES AND DIMENSIONS AND SHAPE |
| EN 10213-4 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES |
| EN 10259 : 1997 | COLD-ROLLED STAINLESS STEEL WIDE STRIP AND PLATE/SHEET - TOLERANCES ON DIMENSIONS AND SHAPE |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EURONORM 17 : 1970 | WIRE ROD OF COMMON UNALLOYED STEELS FOR DRAWING; DIMENSIONS AND PERMISSIBLE DEVIATIONS |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.