BS EN 10088-1:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Stainless steels List of stainless steels
Hardcopy , PDF
01-05-2024
English
10-31-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Chemical composition
Annex A (informative) - Designation of ISO stainless
steels and of comparable grades covered in
various designation systems listed according
to the European system
Annex B (informative) - Matrix to show which steels
are included in which European Standard
Annex C (informative) - Classification of stainless
steel grades
Annex D (informative) - Empirical formulae for steel
grade microstructure classification and pitting
resistance ranking
Annex E (informative) - Guidance data on some
physical properties
Annex F (informative) - Chemical composition of
nickel and cobalt alloys listed in EN 10095,
EN 10269 and EN 10302
Bibliography
Provides a chemical composition of stainless steels, which are subdivided in accordance with their main properties into corrosion resisting steels, heat resisting steels and creep resisting steels.
| Committee |
ISE/105
|
| DevelopmentNote |
Supersedes 93/305485 DC and 01/715519 DC. Together with BS 970-1(1996), BS EN 10083-3 and BS EN 10088-3 supersedes BS 970-1(1991). (07/2005) Together with BS EN 10083-1, BS EN 10084, BS EN 10087, BS EN 10088-2 and BS EN 10088-3, supersedes BS 970-1(1996). (02/2006) Also available as part of BIP 3045 (04/2006) Supersedes 11/30254165 DC. (10/2014)
|
| DocumentType |
Standard
|
| Pages |
72
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard lists the chemical composition of stainless steels, which are subdivided in accordance with their main properties into corrosion resisting steels, heat resisting steels and creep resisting steels and specified in the European Standards given in Table1. Table1 Overview of material standards for stainless steels Corrosion resisting steels Stainless steels Creep resisting steels Heat resisting steels EN10028‑7 EN10028‑7 EN10088‑2 EN10088‑3 EN10088‑4 EN10088‑5 EN10095 EN10151 EN10216‑5 EN10216‑5 EN10217‑7 EN10222‑5 EN10222‑5 EN10250‑4 EN10263‑5 EN10264‑4 EN10264‑4 EN10269 EN10269 EN10270‑3 EN10272 EN10296‑2 EN10297‑2 EN10302 EN10312 Reference data on some physical properties are given in TablesE.1 to E.8. NOTE1 A matrix that shows which steels are included in which standard is given in AnnexB. NOTE2 Valve steels are specified in EN10090 . NOTE3 Steel castings are specified in various European Standards (see Bibliography). NOTE4 Tool steels are specified in ENISO4957 . NOTE5 Welding consumables are specified in various European Standards (see Bibliography).
| Standards | Relationship |
| EN 10088-1:2014 | Identical |
| UNI EN 10088-1 : 2014 | Identical |
| NBN EN 10088-1 : 2014 | Identical |
| NEN EN 10088-1 : 2014 | Identical |
| I.S. EN 10088-1:2014 | Identical |
| NS EN 10088-1 : 2014 | Identical |
| NF EN 10088-1 : 2014 | Identical |
| UNE-EN 10088-1:2015 | Identical |
| SN EN 10088-1:2014 | Identical |
| ONORM EN 10088-1 : 2014 | Identical |
| DIN EN 10088-1:2014-12 | Identical |
| 05/30136143 DC : DRAFT JUL 2005 | BS 5628-2 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| 11/30243193 DC : 0 | BS 750 - SPECIFICATION FOR UNDERGROUND FIRE HYDRANTS AND SURFACE BOX FRAMES AND COVERS |
| BS 6744(2001) : 2001 | STAINLESS STEEL BARS FOR THE REINFORCEMENT OF AND USE IN CONCRETE - REQUIREMENTS AND TEST METHODS |
| BS 7430(2011) : 2011 | CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
| BS 460(2002) : 2002 | CAST IRON RAINWATER GOODS - SPECIFICATION |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 02-323/3(2009) : 2009 | REQUIREMENTS FOR CENTRIFUGES |
| DEFSTAN 02-723/2(2011) : 2011 | REQUIREMENTS FOR MARKER PLATES |
| DEFSTAN 02-323/2(2001) : 2001 | REQUIREMENTS FOR CENTRIFUGES |
| DEFSTAN 02-862(PT3)/3(2011) : 2011 | NAVAL FASTENERS - PART 3: PROCUREMENT OF FIRST LEVEL FASTENERS |
| DEFSTAN 02-862(PT2)/3(2011) : 2011 | NAVAL FASTENERS - PART 2: PROCUREMENT OF NON-FIRST LEVEL FASTENERS |
| DEFSTAN 07-207/2(2009) : 2009 | REQUIREMENTS FOR PADLOCKS (GENERAL PURPOSE) |
| DEFSTAN 66-2(PT2)/2(2007) : 2007 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) - PART 2: INDUSTRIAL QUALITY TO COMMERCIAL SPECIFICATIONS |
| 09/30196573 DC : 0 | BS 8530 - TRADITIONAL-STYLE HALF ROUND, BEADED HALF ROUND, VICTORIAN OGEE AND MOULDED OGEE ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
| BS 8511:2010 | Code of practice for the installation of solid fuel heating and cooking appliances in small craft |
| 05/30135982 DC : DRAFT JUL 2005 | BS 715 - SPECIFICATION FOR METAL FLUE BOXES FOR GAS FIRED APPLIANCES NOT EXCEEDING 20 KW |
| 11/30249994 DC : DRAFT JULY 2011 | BS 7430 - CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
| 09/30169955 DC : 0 | BS 8511 - CODE OF PRACTICE FOR THE INSTALLATION OF SOLID FUEL HEATING APPLIANCES ON BOATS |
| BS 8298-1:2010 | Code of practice for the design and installation of natural stone cladding and lining General |
| BS 750:1984 | Specification for underground fire hydrants and surface box frames and covers |
| BS 750:2012 | Specification for underground fire hydrants and surface box frames and covers |
| BS 5884:1999 | Magnetic materials. Methods for the determination of the relative magnetic permeability of feebly magnetic materials |
| BS 5628-2:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
| BS 4089:1999 | Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases |
| BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 750:2006 | Specification for underground fire hydrants and surface box frames and covers |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| BS 8539:2012 | Code of practice for the selection and installation of post-installed anchors in concrete and masonry |
| 16/30270371 DC : 0 | BS 9101 - STEEL AND ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
| BS 9124:2008 | Specification for steel and aluminium access cover systems with over 1 m clear opening |
| BS 7886:1997 | Method of measurement of hydrogen permeation and the determination of hydrogen uptake and transport in metals by an electrochemical technique |
| BS PD6705-2(2010) : 2010 | STRUCTURAL USE OF STEEL AND ALUMINIUM - PART 2: RECOMMENDATIONS FOR THE EXECUTION OF STEEL BRIDGES TO BS EN 1090-2 |
| BS 715:2005 | Specification for metal flue boxes for gas-fired appliances not exceeding 20 kW |
| BS EN 50112:1996 | Measurement, control, regulation. Electrical temperature sensors. Metal protecting tubes for TC assemblies |
| BS 4N 100-2:1999 | Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen |
| 12/30215639 DC : 0 | BS 8539 - CODE OF PRACTICE FOR THE SELECTION AND INSTALLATION OF POST-INSTALLED ANCHORS IN CONCRETE AND MASONRY |
| 07/30151811 DC : 0 | BS 9124 - SPECIFICATION FOR STEEL AND ALUMINIUM ACCESS COVER SYSTEMS WITH OVER 1M CLEAR OPENING |
| BS 6779-4:1999 | Highway parapets for bridges and other structures Specification for parapets of reinforced and unreinforced masonry construction |
| BS 9101:2017 | Steel and aluminium rainwater systems. Specification |
| BS PAS 2424(2014) : 2014 | QUANTITATIVE SURFACE TEST FOR THE EVALUATION OF RESIDUAL ANTIMICROBIAL (BACTERICIDAL AND/OR YEASTICIDAL) EFFICACY OF LIQUID CHEMICAL DISINFECTANTS ON HARD NON-POROUS SURFACES - TEST METHOD |
| BS 8530:2010 | Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification |
| BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 5400-6:1999 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL |
| EN 12073 : 1999 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR METAL ARC WELDING WITH OR WITHOUT A GAS SHIELD OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10270-3:2011 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| ISO 15510:2014 | Stainless steels — Chemical composition |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| ASTM A 959 : 2016 : REDLINE | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 10213-2 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 2: STEEL GRADES FOR USE AT ROOM TEMPERATURE AND ELEVATED TEMPERATURES |
| EN 10264-4:2012 | Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire |
| EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
| ISO 4957:1999 | Tool steels |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| EN 10283:2010 | Corrosion resistant steel castings |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| EN 10295:2002 | Heat resistant steel castings |
| EN 10222-5:2017 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
| EN 10250-4:1999 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| EN 12072 : 1999 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| EN 10213-3 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 3: STEEL GRADES FOR USE AT LOW TEMPERATURES |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| CEN ISO/TR 15608:2017 | Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
| EN 1600:1997 | Welding consumables - Covered electrodes for manual arc welding of stainless and heat resisting steels - Classification |
| EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| EN 10213-4 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES |
| EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.