BS EN 10087 : 1999-01
Current
The latest, up-to-date edition.
FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS
01-01-1999
Foreword
1 Scope
2 Normative references
3 Definitions
3.1 Free-cutting steels
4 Classification and designation
4.1 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
6 Manufacturing process
6.1 General
6.2 Treatment condition at delivery
6.3 Cast separations
7 Requirements
7.1 Chemical composition and mechanical properties
7.2 Weldability
7.3 Structure
7.4 Internal soundness
7.5 Surface quality
7.6 Dimensions, tolerances on dimensions and shape
8 Inspection and testing
8.1 Types and contents of inspection documents
8.2 Specific inspection and testing
9 Marking
Annex A (normative) Ruling section for the mechanical
properties
Annex B (normative) Supplementary or special requirements
Annex C (informative) Bibliography
Annex D (informative) Dimensional standards applicable to
products complying with this European
Standard
National annex NA (informative) Non-conflicting national
additions
Provides the technical delivery conditions for semi-finished products, hot-rolled bars (including peeled bars) and rods made from free-cutting steels.
| Committee |
ISE/31
|
| DevelopmentNote |
Supersedes 95/706683 DC. Reviewed and confirmed by BSI, October 2005. (10/2005) Together with BS EN 10083-1, BS EN 10084, BS EN 10088-1, BS EN 10088-2 and BS EN 10088-3, supersedes BS 970-1(1996). (02/2006)
|
| DocumentType |
Standard
|
| ProductNote |
BS AMD 10442 was incorrect due to BSI error and now it has been replaced by BS AMD 10442R. Supersedes 95/706683 DC. BS AMD 10442R is available as free of charge. See separate amendment record. Reviewed and confirmed by BSI, October 2005. (SND 10/2005) Together with BS EN 10083-1, BS EN 10084, BS EN 10088-1, BS EN 10088-2 and BS EN 10088-3, supersedes BS 970-1(1996). (Amg 02/2006) BS AMD 15803 is available as free of charge. See separate amendment record. (SND 03/2006)
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 10087 : 1998 | Identical |
| NF EN 10087 : 1998 | Identical |
| EN 10087:1998 | Identical |
| DIN EN 10087:1999-01 | Identical |
| NBN EN 10087 : 1999 | Identical |
| I.S. EN 10087:1999 | Identical |
| NS EN 10087 : 1ED 1999 | Identical |
| UNI EN 10087 : 2000 | Identical |
| SN EN 10087 : 1999 | Identical |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10221:1995 | Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| NBN ECISS IC 10 : 1993 | DESIGNATION SYSTEM FOR STEEL - ADDITIONAL SYMBOLS FOR STEEL NAMES |
| EURONORM 103 : 1971 | MICROSCOPIC DETERMINATION OF THE FERRITE OR AUSTENITIC GRAIN SIZE OF STEELS |
| EURONORM 60 : 1977 | HOT-ROLLED ROUND STEEL FOR GENERAL USE |
| EURONORM 65 : 1980 | HOT-ROLLED ROUND STEEL FOR SCREWS AND RIVETS |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EURONORM 61 : 1982 | HOT-ROLLED HEXAGON STEEL |
| EURONORM 58 : 1978 | HOT-ROLLED FLAT STEEL FOR GENERAL USE |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EURONORM 108 : 1972 | ROUND STEEL WIRE FOR COLD FORMED SCREWS; DIMENSIONS AND PERMISSIBLE DEVIATIONS |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 10084:2008 | Case hardening steels - Technical delivery conditions |
| EN 10003-1 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD |
| EURONORM 59 : 1978 | HOT-ROLLED SQUARE STEEL FOR GENERAL USE |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EURONORM 17 : 1970 | WIRE ROD OF COMMON UNALLOYED STEELS FOR DRAWING; DIMENSIONS AND PERMISSIBLE DEVIATIONS |
| CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.