• There are no items in your cart

BS 891-1:1962

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Method for Rockwell hardness test Testing of metals

Available format(s)

Hardcopy , PDF

Superseded date

07-23-2013

Superseded by

BS 891:1989

Language(s)

English

Published date

08-01-1964

Test requirements and procedure using scales A to K inclusive; minimum thickness of test pieces, accuracy of hardness measurements.

Committee
ISE/101
DocumentType
Standard
Pages
12
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
EN 4 : LATEST Similar to
AS B84.1-1967 Identical

BS 3696-1:1977 Specification for master gears Spur and helical gears (metric module)
BS 5770-4:1981 Steel strip intended for the manufacture of springs Specification for martensitic and austenitic stainless steel
BS 3606:1978 Specification for steel tubes for heat exchangers
BS 906-2:1972 Specification for engineers\' parallels. Imperial units
BS A 300:1989 Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads
BS 4190:1967 Specification for ISO metric black hexagon bolts, screws and nuts
BS 2559-4:1973 Specification for screwdrivers Ratchet screwdrivers
BS 5770-2:1981 Steel strip intended for the manufacture of springs Specification for cold rolled carbon and low alloy steel
BS 5595-2:1981 Interchangeable magnetic twelve-disk pack for information processing Specification for 200 Mbytes magnetic twelve-disk pack
BS 4L 101:1990 Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings
DEFSTAN 95-5/2(1987) : 1987 INSPECTION OF WROUGHT STEEL FOR STRESSED APPLICATIONS
BS 6104-3:1981 Mechanical properties of fasteners Specification for set screws and similar threaded fasteners not under tensile stresses
BS 5577:1984 Specification for table cutlery
BS 6101-1:1981 Machine tool ball screws Methods of calculating dynamic and static load and life ratings
BS 4551:1980 Methods of testing mortars, screeds and plasters
BS 4825-3:1976 Specification. Stainless steel pipes and fittings for the food industry. Clamp type couplings
BS 1673-10:1977 Methods of test for raw rubber and unvulcanized compounded rubber. Measurement of prevulcanizing and curing characteristics by means of curemeters
BS 4825-4:1977 Specification for stainless steel pipes and fittings for the food industry Screwed type couplings
BS SP 166:1982 Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series)
BS 1881-120:1983 Testing concrete Method for determination of the compressive strength of concrete cores
BS 7201-1:1989 Hydraulic fluid power. Gas loaded accumulators Specification for seamless steel accumulator bodies above 0.5 L water capacity
BS 3531-5.2:1990 Implants for osteosynthesis. Bone screws and auxiliary equipment Specification for screwdrivers for screws having heads with single slot, cruciate slot or cross-recess
BS 1943:1989 Specification for woodworking chisels and gouges
BS 192:1982 Specification for open-ended wrenches
BS 4882:1990 Specification for bolting for flanges and pressure containing purposes
BS 4437:1987 Method for determining hardenability of steel by end quenching (Jominy test)
BS 1429:1980 Specification for annealed round steel wire for general engineering springs
BS 5045-1:1982 Transportable gas containers Specification for seamless steel gas containers above 0.5 litre water capacity
BS 3692:1967 Specification for ISO metric precision hexagon bolts, screws and nuts. Metric units
BS 876:1995 Specification for hand hammers
BS 970-1:1983 Specification for wrought steels for mechanical and allied engineering purposes General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels
BS 6105:1981 Specification for corrosion-resistant stainless steel fasteners
BS 5045-6:1987 Transportable gas containers Specification for seamless containers of less than 0.5 litre water capacity
BS 970-4:1970 Specification for wrought steels for mechanical and allied engineering purposes Valve steels
BS 4395-2:1969 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts and nuts and general grade washers
BS 426:1969 Specification for fixed centres for use on machine tools and in other applications
BS 4A 4:1966 Test pieces and test methods for metallic materials for aircraft. Metric units
BS 4929-2:1973 Specification for steel hexagon prevailing-torque type nuts Unified (inch) series
BS 6333:1983 Specification for adjustable wrenches
BS 1881-109:1983 Testing concrete Method for making test beams from fresh concrete
BS A 299:1989 Specification for procurement of alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads
BS A 298:1988 Methods of test for self-locking nuts with maximum operating temperature greater than 425°C
BS 3537:1979 Specification for gudgeon pins up to 200 mm diameter
BS 1881-110:1983 Testing concrete Method for making test cylinders from fresh concrete
BS 3962-6:1980 Methods of test for finishes for wooden furniture Assessment of resistance to mechanical damage
BS 5600-4.5:1979 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals Rockwell hardness test (scale A)
BS 436-3:1986 Spur and helical gears Method for calculation of contact and root bending stress limitations for metallic involute gears
BS 235:1987 Specification for gears for electric traction
DEFSTAN 51-11(PT33)/1(1988) : INTERIM HAND TOOLS, GENERAL PURPOSE PART 33: PUNCHES, DRIVE PIN, AND CENTRE SOLID
BS 4395-1:1969 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade
BS 6813:1987 Specification for trade cutlery for use with food
BS 5194-4:1985 Surgical instruments Specification for scissors, shears and other jointed cutting instruments
BS 2559-1:1971 Specification for screwdrivers Screwdrivers for slotted head screws
BS 5045-3:1984 Transportable gas containers Specification for seamless aluminium alloy gas containers above 0.5 litre water capacity and up to 300 bar charged pressure at 15°C
BS 3HR 100:1978 Procedure for inspection and testing of wrought heat-resisting alloys
BS 6104-2:1983 Mechanical properties of fasteners Specification for nuts with specified proof load values
BS HC 100:1972 Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings
BS 3388:1973 Specification for forks, shovels and spades
BS AU 142:1968 Methods of test for brake linings materials
BS 4395-3:1973 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts (waisted shank), nuts and general grade washers
BS 4550-3.4:1978 Methods of testing cement. Physical tests Strength tests
BS 5770-3:1981 Steel strip intended for the manufacture of springs Specification for pre-hardened and tempered carbon steel
BS 5194-3:1985 Surgical instruments Specification for dissecting forceps
BS 1254:1981 Specification for WC seats (plastics)
BS 6104-1:1981 Mechanical properties of fasteners Specification for bolts, screws and studs
BS 5194-2:1989 Surgical instruments Specification for instruments with pivot joints (excluding cutting instruments)
BS 3673-3:1968 Specification for spring retaining rings Carbon steel C clips
BS 4933:1973 Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
BS 5770-1:1981 Steel strip intended for the manufacture of springs Specification for hot rolled carbon and low alloy steel
BS 5194-2:1985 Surgical instruments Specification for instruments with pivot joints (excluding cutting instruments)
BS 876:1981 Specification for hand hammers
BS 906-1:1972 Specification for engineers\' parallels Metric units
BS 5861:1980 Specification for rear-mounted power take-offs on agricultural tractors
BS 3673-4:1977 Specification for spring retaining rings Carbon steel circlips - metric series
BS 4929-1:1973 Specification for steel hexagon prevailing-torque type nuts Metric series
BS 3623:1981 Specification for woodworkers\' metal-bodied planes
BS 1449-1:1983 Steel plate, sheet and strip. Specification for carbon and carbon-manganese plate, sheet and strip

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.