BS 8118-2(1991) : 1991
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STRUCTURAL USE OF ALUMINIUM - PART 2: SPECIFICATION FOR MATERIALS, WORKMANSHIP AND PROTECTION
Hardcopy , PDF
03-30-2010
English
01-01-1991
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Committees responsible
Foreword
Specification
Section 1. General
1.1 Scope
Section 2. Materials
2.1 Wrought materials
2.2 Castings
2.3 Bolts, nuts, washers and rivets
2.4 Welding consumables
Section 3. Workmanship
3.1 General
3.2 Storage and transportation
3.3 Fabrication erection and assembly tolerances
3.4 Marking out
3.5 Cutting
3.6 Drilling, punching and reaming
3.7 Bending and forming
3.8 Bolting and riveting
3.9 Welding
3.10 Structural adhesives
3.11 Inspection and safety
Section 4. Protection
4.1 General
4.2 Painting
4.3 Protection of metal-to-metal contact surfaces and
at bolted and riveted joints
4.4 High strength friction grip bolted joints
4.5 Pinned joints
4.6 Welded joints
4.7 Bonded joints
4.8 Contact between aluminium and non-metallic
materials
Appendices
A Tolerances
B Methods, extent and acceptance levels for
production welds
Describes requirements for the materials, workmanship and protection of aluminium and aluminium alloy construction and structures.
| Committee |
CSB/36
|
| DevelopmentNote |
Supersedes 97/107562 DC (03/2005) Supersedes BS CP118(1969). (08/2005) Supersedes 85/12254 DC (10/2005) Reviewed and confirmed by BSI, October 2007. (09/2007)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| BS 6779-3:1994 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of combined metal and concrete construction |
| 17/30349707 DC : DRAFT AUG 2017 | BS 5975:2018 - CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| BS 6229:2003 | Flat roofs with continuously supported coverings. Code of practice |
| BS 5975(2008) : 2008 | CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| BS 5974:1990 | Code of practice for temporarily installed suspended scaffolds and access equipment |
| 06/30094368 DC : DRAFT JAN 2006 | BS 4592-5 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 5: SOLID PLATES IN METAL AND GLASS REINFORCED PLASTICS (GRP) - SPECIFICATION |
| BS 4592-5:2006 | Industrial type flooring and stair treads Solid plates in metal and glass reinforced plastics (GRP). Specification |
| BS 6180:1999 | Barriers in and about buildings. Code of practice |
| BS 4592-1:1995 | Industrial type flooring, walkways and stair treads Specification for open bar gratings |
| BS 4592-1:2006 | Industrial type flooring and stair treads Metal open bar gratings. Specification |
| BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
| BS 4008:2006 | Specification for cattle grids |
| BS 4008:1991 | Specification for cattle grids |
| BS 6180:1995 | Code of practice for barriers in and about buildings |
| BS 6779-1:1998 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction |
| BS 5395-1:2000 | Stairs, ladders and walkways Code of practice for the design, construction and maintenance of straight stairs and winders |
| BS 4485-4:1996 | Water cooling towers Code of practice for structural design and construction |
| BS 6767-1:1999 | Transportable accommodation units Recommendations for design and construction of the basic unit |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| 07/30016130 DC : 0 | BS 5974 - CODE OF PRACTICE FOR THE PLANNING, DESIGN, SETTING UP AND USE OF TEMPORARILY INSTALLED SUSPENDED ACCESS EQUIPMENT |
| BS 9124:2008 | Specification for steel and aluminium access cover systems with over 1 m clear opening |
| BS 4592-5:1995 | Industrial type flooring, walkways and stair treads Specification for solid plates in steel, aluminium and glass reinforced plastics |
| S.R. CWA 15902-2:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 2: SPECIFICATIONS FOR DESIGN, MANUFACTURE AND FOR USE OF ALUMINIUM AND STEEL TRUSSES AND TOWERS |
| BS 2037:1994 | Specification for portable aluminium ladders, steps, trestles and lightweight stagings |
| BS 2830:1994 | Specification for suspended access equipment (suspended chairs, traditional steeplejack\'s seats, work cages, cradles and platforms) for use in the building, engineering construction, steeplejack and cleaning industries |
| BS AU 210-2:1994 | Drawbars for caravans and light trailers Specification for the design of aluminium drawbars and chassis |
| BS 7818:1995 | Specification for pedestrian restraint systems in metal |
| BS 8118-1:1991 | Structural use of aluminium Code of practice for design |
| 07/30150912 DC : 0 | BS 5975 - CODE OF PRACTICE FOR THE PROCEDURAL CONTROL OF TEMPORARY WORKS AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| 06/30094360 DC : DRAFT JAN 2006 | BS 4592-1 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 1: METAL OPEN BAR GRATINGS - SPECIFICATION |
| 07/30151811 DC : 0 | BS 9124 - SPECIFICATION FOR STEEL AND ALUMINIUM ACCESS COVER SYSTEMS WITH OVER 1M CLEAR OPENING |
| BS PAS 51(2004) : 2004 | GUIDE TO INDUSTRY BEST PRACTICE FOR ORGANIZING OUTDOOR EVENTS |
| BS 5975:1996 | Code of practice for falsework |
| BS 8118-1:1991 | Structural use of aluminium Code of practice for design |
| BS 4300-14(1973) : 1973 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS FOR GENERAL ENGINEERING PURPOSES (SUPPLEMENTARY SERIES) - 7020 PLATE, SHEET STRIP |
| BS 3294-1:1960 | Specification for the use of high strength friction grip bolts in structural steelwork General grade bolts |
| BS 4604-1:1970 | SPECIFICATION FOR THE USE OF HIGH STRENGTH FRICTION GRIP BOLTS IN STRUCTURAL STEELWORK METRIC SERIES - PART 1: GENERAL GRADE |
| BS 5289:1976 | Code of practice. Visual inspection of fusion welded joints |
| BS 4395-1:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade |
| BS 4300-15(1973) : 1973 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS FOR GENERAL ENGINEERING PURPOSES (SUPPLEMENTARY SERIES) - 7020 BAR, EXTRUDED ROUND TUBE AND SECTIONS |
| BS CP143-15(1973) : 1973 | CODE OF PRACTICE FOR SHEET ROOF AND WALL COVERINGS - CODE OF PRACTICE FOR SHEET ROOF AND WALL COVERINGS - ALUMINIUM - METRIC UNITS |
| BS 3451:1973 | Methods of testing fusion welds in aluminium and aluminium alloys |
| BS 1494-1:1964 | Specification for fixing accessories for building purposes Fixings for sheet, roof and wall coverings |
| BS 4300-12(1969) : 1969 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS FOR GENERAL ENGINEERING PURPOSES (SUPPLEMENTARY SERIES) - 5454 BARS, EXTRUDED ROUND TUBE AND SECTIONS |
| BS 4842:1984 | Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings |
| BS 4300-1(1967) : 1967 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS FOR GENERAL ENGINEERING PURPOSES (SUPPLEMENTARY SERIES) - ALUMINIUM ALLOY LONGITUDINALLY WELDED TUBE |
| PD 6484:1979 | Commentary on corrosion at bimetallic contacts and its alleviation |
| BS 2569-1:1964 | Specification for sprayed metal coatings Protection of iron and steel by aluminium and zinc against atmospheric corrosion |
| BS 2451:1963 | Specification for chilled iron shot and grit |
| BS 4870-2:1982 | Specification for approval testing of welding procedures TIG or MIG welding of aluminium and its alloys |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.