• There are no items in your cart

BS 8002:2015

Current

Current

The latest, up-to-date edition.

Code of practice for earth retaining structures

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-30-2015

US$388.09
Excluding Tax where applicable

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General rules
5 Gravity retaining walls
6 Semi-gravity retaining walls
7 Embedded retaining walls
8 Cofferdams, basements, and strutted excavations
Annexes
Annex A (normative) - Deadman anchors
Annex B (informative) - Specific formations
Bibliography

Provides recommendations for the design and construction of earth retaining structures to support ground at slopes steeper than the ground would naturally assume.

Committee
B/526
DevelopmentNote
Together with BS EN 1997-1, it supersedes BS 8002(1994). Supersedes 15/30301518 DC. (07/2015)
DocumentType
Standard
Pages
104
PublisherName
British Standards Institution
Status
Current
Supersedes

This British Standard gives recommendations for the design and construction of earth retaining structures to support ground at slopes steeper than the ground would naturally assume. It provides non-contradictory, complementary information for use in conjunction with BSEN1997 and its UK National Annex.

Clause4 gives general recommendations for the design and construction of all types of earth retaining structures; Clause5, Clause6, and Clause7 give specific recommendations for the design and construction of gravity walls, semi-gravity walls, and embedded walls (respectively); and Clause8 gives specific recommendations for the design and construction of cofferdams, basements, and strutted excavations.

Annex A gives specific recommendations for the design and construction of deadman anchors.

Annex B gives information about specific geological formations encountered in the UK.

NOTE1 This standard does not cover the design and construction of anchors (other than deadman anchors), for which see BS8081.

NOTE2 This standard does not cover the design and construction of earthworks, for which see BS6031.

NOTE3 This standard does not cover the design and construction of foundations, for which see BS8004.

NOTE4 This standard does not cover the design and construction of maritime works, for which see BS6349.

NOTE5 This standard does not cover the design and construction of earth retaining structures constructed using strengthened or reinforced soil walls, for which see BS8006.

BS EN 1991-2 NA : 2003 UK NATIONAL ANNEX TO EUROCODE 1: ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES
BS EN 771-5 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 5: MANUFACTURED STONE MASONRY UNITS
BS EN 10245-5:2011 Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire
BS EN 12666-1 : 2005 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS EN 10223-8:2013 Steel wire and wire products for fencing and netting Welded mesh gabion products
BS EN 771-3 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES)
BS EN 13369:2013 Common rules for precast concrete products
BS 5481:1977 Specification for unplasticized PVC pipe and fittings for gravity sewers
BS EN 335:2013 Durability of wood and wood-based products. Use classes: definitions, application to solid wood and wood-based products
BS 8006-1(2010) : 2010 CODE OF PRACTICE FOR STRENGTHENED/REINFORCED SOILS AND OTHER FILLS
BS EN 771-4 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 4: AUTOCLAVED AERATED CONCRETE MASONRY UNITS
BS EN ISO 14688-1 : 2002 GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 1: IDENTIFICATION AND DESCRIPTION
BS EN 1997-2:2007 Eurocode 7. Geotechnical design Ground investigation and testing
PD 6694-1:2011 Recommendations for the design of structures subject to traffic loading to BS EN 1997-1:2004
BS EN 460:1994 Durability of wood and wood-based products. Natural durability of solid wood. Guide to the durability requirements for wood to be used in hazard classes
BS EN 206 : 2013 CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
BS EN 1991-1-1 NA : 2002 UK NATIONAL ANNEX TO EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
BS EN 10025:1993 Hot rolled products of non-alloy structural steels. Technical delivery conditions
BS EN 1996-3:2006 Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures
BS EN 15258:2008 Precast concrete products. Retaining wall elements
BS EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced
BS EN 1993-1-1 NA : 2005 UK NATIONAL ANNEX TO EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
BS 4449(2005) : 2005 STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - BAR, COIL AND DECOILED PRODUCT - SPECIFICATION
BS EN 10244-2:2009 Steel wire and wire products. Non-ferrous metallic coatings on steel wire Zinc or zinc alloy coatings
BS EN 771-2 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 2: CALCIUM SILICATE MASONRY UNITS
BS EN 10218-1:2012 Steel wire and wire products. General Test methods
BS EN 13670:2009 Execution of concrete structures
BS ISO 5667-11:2009 Water quality. Sampling Guidance on sampling of groundwaters
BS EN 1536 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
BS EN 10245-1:2011 Steel wire and wire products. Organic coatings on steel wire General rules
BS EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
BS EN 1997-1 NA : 2004 UK NATIONAL ANNEX TO EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
BS EN 14199:2015 Execution of special geotechnical works. Micropiles
BS EN 10245-2:2011 Steel wire and wire products. Organic coatings on steel wire PVC finished wire
BS 8006-2(2011) : 2011 CODE OF PRACTICE FOR STRENGTHENED/REINFORCED SOILS - PART 2: SOIL NAIL DESIGN
BS 8215:1991 Code of practice for design and installation of damp-proof courses in masonry construction
BS 4729(2005) : 2005 CLAY BRICKS OF SPECIAL SHAPES AND SIZES - RECOMMENDATIONS
BS EN 598 : 2007 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS EN 351-1:2007 Durability of wood and wood-based products. Preservative-treated solid wood Classification of preservative penetration and retention
BS EN 335-2:2006 Durability of wood and wood-based products. Definition of use classes Application to solid wood
BS 5975(2008) : 2008 CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK
BS EN 1997-1 : 2004 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
BS EN 335-1:2006 Durabiltity of wood and wood-based products. Definitions of use classes General
BS EN ISO 14689-1:2003 Geotechnical investigation and testing. Identification and classification of rock. Identification and description
BS 8500-2(2015) : 2015 CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE
BS EN 1538 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DIAPHRAGM WALLS
BS EN 10223-3:2013 Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes
BS EN 350-2:1994 Durability of wood and wood-based products. Natural durability of solid wood Guide to natural durability and treatability of selected wood species of importance in Europe
BS EN ISO 14688-2 : 2004 GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PRINCIPLES FOR A CLASSIFICATION
PD 6697:2010 Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2
BS 5642-2(1983) : 1983 SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE
BS EN 10218-2:2012 Steel wire and wire products. General Wire dimensions and tolerances
BS EN 1852-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications for pipes, fittings and the system
PD 6484:1979 Commentary on corrosion at bimetallic contacts and its alleviation
BS 5837:2012 Trees in relation to design, demolition and construction. Recommendations
BS EN 845-1 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
BS EN 10245-3:2011 Steel wire and wire products. Organic coatings on steel wire PE coated wire
BS 6349-1-3:2012 Maritime works General. Code of practice for geotechnical design
BS EN 1990:2002+A1:2005 Eurocode. Basis of structural design
BS EN 335-3:1996 Hazard classes of wood and wood-based products against biological attack Application to wood-based panels
BS 10175(2011) : 2011 INVESTIGATION OF POTENTIALLY CONTAMINATED SITES - CODE OF PRACTICE
BS EN 1993-5 NA : 2009 UK NATIONAL ANNEX TO EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING
BS EN 771-1 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 1: CLAY MASONRY UNITS
BS 5480:1990 Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage
BS EN 771-6 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS
BS EN 12063:1999 Execution of special geotechnical work. Sheet pile walls

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.