BS 7533-13:2009
Current
The latest, up-to-date edition.
Pavements constructed with clay, natural stone or concrete pavers Guide for the design of permeable pavements constructed with concrete paving blocks and flags, natural stone slabs and setts and clay pavers
Hardcopy , PDF
English
03-31-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General design criteria
5 Design
6 Selection of pavement components
Annexes
Annex A (normative) - Grading recommendations for base,
laying course and joint filling material
Annex B (informative) - Typical physical properties of
replacement systems (geo-cellular) units
Annex C (informative) - Typical filter fabric specification
used in the upper layer
Annex D (informative) - A structural design example
Bibliography
Provides guidance on the design of permeable pavements surfaced with: - concrete paving blocks manufactured in accordance with BS EN 1338; - concrete paving flags manufactured in accordance with BS EN 1339; - natural stone slabs manufactured in accordance with BS EN 1341; - natural stone setts manufactured in accordance with BS EN 1342; - clay pavers manufactured in accordance with BS EN 1344.
| Committee |
B/507
|
| DevelopmentNote |
Supersedes 07/30159351 DC. (03/2009)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of BS 7533 gives guidance on the design of permeable pavements surfaced with:
concrete paving blocks manufactured in accordance with BS EN 1338;
concrete paving flags manufactured in accordance with BS EN 1339;
natural stone slabs manufactured in accordance with BS EN 1341;
natural stone setts manufactured in accordance with BS EN 1342; and
clay pavers manufactured in accordance with BS EN 1344. and laid in accordance with BS 7533-3.
It applies to all pavements subjected to the usual road spectrum of axle loads up to 8 000 kg, including both highway pavements and light industrial pavements where the traffic is similar in character to highway vehicles.
It specifically excludes heavy duty pavements with traffic and other applications such as aircraft pavements and those in ports and specialized industrial areas.
| 13/30284071 DC : 0 | BS 7533-102 - PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE OR CONCRETE PAVING UNITS - PART 102: CODE OF PRACTICE FOR THE CONSTRUCTION AND MAINTENANCE OF PAVEMENTS USING MODULAR PAVING UNITS |
| BS EN 1339:2003 | Concrete paving flags. Requirements and test methods |
| BS 7533-3(2005) : 2005 | PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE OR CONCRETE PAVERS - PART 3: CODE OF PRACTICE FOR LAYING PRECAST CONCRETE PAVING BLOCKS AND CLAY PAVERS FOR FLEXIBLE PAVEMENTS |
| BS EN 1344:2013 | Clay pavers. Requirements and test methods |
| BS EN 1342:2012 | Setts of natural stone for external paving. Requirements and test methods |
| BS EN 993-1:1995 | Methods of test for dense shaped refractory products Determination of bulk density, apparent porosity and true porosity |
| BS EN ISO 10319:2015 | Geosynthetics. Wide-width tensile test |
| BS EN 752:2008 | Drain and sewer systems outside buildings |
| BS EN 12620:2013 | Aggregates for concrete |
| BS 1377-9:1990 | Methods for test for soils for civil engineering purposes In-situ tests |
| BS EN 12457-3:2002 | Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4 mm (without or with size reduction) |
| BS EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption |
| BS 6100-3:2007 | Building and civil engineering. Vocabulary Civil engineering. General |
| BS EN 13242:2013 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| BS EN ISO 12236:2006 | Geosynthetics. Static puncture test (CBR test) |
| BS EN ISO 11058:2010 | Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load |
| BS EN 965:1995 | Geotextiles and geotextile-related products. Determination of mass per unit area |
| BS EN 1341:2012 | Slabs of natural stone for external paving. Requirements and test methods |
| BS 1377-4:1990 | Methods of test for soils for civil engineering purposes Compaction-related tests |
| BS EN 1338:2003 | Concrete paving blocks. Requirements and test methods |
| BS EN ISO 12956:1999 | Geotextiles and geotextile-related products. Determination of the characteristic opening size |
| BS 7533-1:2001 | Pavements constructed with clay, natural stone or concrete pavers Guide for the structural design of heavy duty pavements constructed of clay pavers or precast concrete paving blocks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.