BS 7435-2:1991
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Fibre cement flue pipes, fittings and terminals Specification for heavy quality fibre cement flue pipes, fittings and terminals
Hardcopy , PDF
04-01-2005
English
07-31-1991
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Committees responsible
Foreword
Specification
1 Scope
2 Definitions
3 Composition and materials
4 Fire properties
5 Manufacture
6 Sizes and tolerances
7 Performance criteria
8 Marking
9 Instructions
Appendices
A Sizes of pipes, fittings and freestanding terminals
(cone caps)
B Test for transverse crushing strength
C Test for flow resistance of freestanding terminals
D Test for acid resistance
Tables
1 Tolerances
2 Straight pipes
3 Square and obtuse bends
4 Equal square and obtuse tees
5 Unequal square and obtuse tees
6 Taper pieces
7 Sockets for connecting fibre cement pipes to metal
pipes of the same nominal size
8 Loose sockets for connecting fibre cement pipes of
the same nominal size
9 Cone caps
10 Blank caps
11 Cleaning doors
12 Width of upper press-block
13 Flue flow rates and values of the constant X
Figures
1 Typical freestanding terminals
2 Straight pipe
3 Square/obtuse bend
4 Equal square/obtuse tee
5 Unequal square/obtuse tee
6 Taper piece
7 Socket for connecting fibre cement pipe to metal
pipe of the same nominal size
8 Loose socket for connecting fibre cement pipes of
the same nominal size
9 Cone cap
10 Blank cap
11 Cleaning door
12 Loading in transverse crushing test
13 Apparatus for measuring flow resistance of
freestanding terminals under wind conditions
Dimensional, performance and test requirements for heavy quality fibre (excluding asbestos) cement flue pipes, fittings and freestanding terminals.
| Committee |
B/506
|
| DevelopmentNote |
Supersedes 88/13657 DC. Superseded by BS EN 1857 (08/2003)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy |
| BS 5871-2:2005 | Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Inset live fuel effect gas fires of heat input not exceeding 15 kW, and fire/back boilers (2nd and 3rd family gases) |
| BS 5440-1:2000 | Installation and maintenance of flues and ventilation for gas appliances of rated heat input not exceeding 70 kW net (1st, 2nd and 3rd family gases) Specification for installation and maintenance of flues |
| BS 5871-3:2001 | Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Decorative fuel effect gas appliances of heat input not exceeding 20 kW (2nd and 3rd family gases) |
| BS 5871-3:2005 | Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Decorative fuel effect gas appliances of heat input not exceeding 20 kW (2nd and 3rd family gases) |
| BS 5871-2:2001 | Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Inset live fuel effect gas fires of heat input not exceeding 15 kW, and fire/back boilers (2nd and 3rd family gases) |
| BS 5871-1:2005 | Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Gas fires, convector heaters, fire/back boilers and heating stoves (2nd and 3rd family gases) |
| BS 5871-1:2001 | Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Gas fires, convector heaters, fire/back boilers and heating stoves (1st, 2nd and 3rd family gases) |
| BS 7435-1:1991 | Fibre cement flue pipes, fittings and terminals Specification for light quality fibre cement flue pipes, fittings and terminals |
| BS 5871-3:1991 | Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Decorative fuel effect gas appliances of heat input not exceeding 15 kW (2nd and 3rd family gases) |
| BS 715:1993 | Specification for metal flue pipes, fittings, terminals and accessories for gas-fired appliances with a rated input not exceeding 60 kW |
| BS 476-4:1970 | Fire tests on building materials and structures Non-combustibility test for materials |
| BS 5410-3:1976 | Code of practice for oil firing Installations for furnaces, kilns, ovens and other industrial purposes |
| BS 1179-6:1980 | Glossary of terms used in the gas industry Combustion and utilization including installation at consumers\' premises |
| BS 1042-2.1:1983 | Measurement of fluid flow in closed conduits. Velocity area methods Method using Pitot static tubes |
| BS 7435-1:1991 | Fibre cement flue pipes, fittings and terminals Specification for light quality fibre cement flue pipes, fittings and terminals |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.