BS 6510:2010
Current
The latest, up-to-date edition.
Steel-framed windows and glazed doors. Specification
Hardcopy , PDF
English
11-30-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Handing
5 Materials
6 Fabrication
7 Protective finishes
8 Design for installation
9 Design for glazing
10 Security
11 Safety in case of fire
12 Safety in use
13 Weathertightness
14 Operation and strength
15 Hygiene, health and environment
16 Acoustic performance
17 Energy conservation
18 Marking
Annexes
Annex A (normative) - Specification for handing
Annex B (informative) - Recommendations for fixings
Bibliography
Defines requirements for the design and fabrication of steel-framed windows and glazed doors.
| Committee |
B/538/1
|
| DevelopmentNote |
Supersedes BS 6510(2005) & 10/30143169 DC. (11/2010)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This British Standard specifies requirements for the design and fabrication of steel-framed windows and glazed doors. NOTE Performance requirements common to all windows and external pedestrian doors are specified in BS 6375. It is applicable to windows and doors fabricated into frames in a factory from mild steel profiles, hot-rolled or cold-formed, installed vertically into the external face of buildings, as single or multi-light units, in coupled assemblies when appropriate, of the following types: fixed light; side-hung open out or in; top-hung; bottom-hung; horizontal pivot; vertical pivot; single-leaf hinged or pivoting door; double-leaf hinged or pivoting door. It is not applicable to: windows or doors in which any frame member is longer than 3 m; patent glazing or curtain walls that span across structural floor elements; kits despatched in bar form for assembly into frames on site.
| BS EN 287-1:2011 | Qualification test of welders. Fusion welding Steels |
| BS EN 13049:2003 | Windows. Soft and heavy body impact. Test method, safety requirements and classification |
| BS EN 13438:2013 | Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| BS 6206:1981 | Specification for impact performance requirements for flat safety glass and safety plastics for use in buildings |
| BS EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions |
| DD ENV 1627:1999 | Windows, doors, shutters. Burglar resistance. Requirements and classification |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| BS EN 10025-2:2004 | Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels |
| BS EN 13141-1:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation Externally and internally mounted air transfer devices |
| BS EN ISO 2081:2008 | Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel |
| BS EN 12519:2004 | Windows and pedestrian doors. Terminology |
| BS EN 1125:2008 | Building hardware. Panic exit devices operated by a horizontal bar, for use on escape routes. Requirements and test methods |
| BS EN 14600:2005 | Doorsets and openable windows with fire resisting and/ or smoke control characteristics. Requirements and classification |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| PREN 16034 : DRAFT 2009 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS |
| BS 6375-2:2009 | Performance of windows and doors Classification for operation and strength characteristics and guidance on selection and specification |
| BS 8000-7:1990 | Workmanship on building sites Code of practice for glazing |
| BS EN 14351-1 : 2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| PREN 13637 : DRAFT 2014 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions |
| BS 7950:1997 | Specification for enhanced security performance of windows for domestic applications |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| BS EN 13142:2013 | Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics |
| BS EN 14609:2004 | Windows. Determination of the resistance to static torsion |
| BS PAS 24(2007) : 2007 | ENHANCED SECURITY PERFORMANCE REQUIREMENTS FOR DOOR ASSEMBLIES - SINGLE AND DOUBLE LEAF, HINGED EXTERNAL DOOR ASSEMBLIES TO DWELLINGS |
| BS EN 12600:2002 | Glass in building. Pendulum test. Impact test method and classification for flat glass |
| BS DD8455(2007) : 2007 | MATERIALS FOR GASKETS AND WEATHERSTRIPPING FOR WINDOWS, DOORS, CONSERVATORIES AND CURTAIN WALLING - REQUIREMENTS AND TEST METHODS |
| BS 8213-4:2007 | Windows, doors and rooflights Code of practice for the survey and installation of windows and external doorsets |
| BS EN ISO 9227:2017 | Corrosion tests in artificial atmospheres. Salt spray tests |
| BS EN 179:2008 | Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods |
| BS EN 410:2011 | Glass in building. Determination of luminous and solar characteristics of glazing |
| BS 476-31.1:1983 | Fire tests on building materials and structures Methods for measuring smoke penetration through doorsets and shutter assemblies - Method of measurement under ambient temperature conditions |
| BS EN 12365-1:2003 | Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling Performance requirements and classification |
| BS 6338:1982 | Specification for chromate conversion coatings on electroplated zinc and cadmium coatings |
| BS 6375-3(2009) : 2009 | PERFORMANCE OF WINDOWS AND DOORS - PART 3: CLASSIFICATION FOR ADDITIONAL PERFORMANCE CHARACTERISTICS AND GUIDANCE ON SELECTION AND SPECIFICATION |
| BS 476-22:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of non-loadbearing elements of construction |
| BS EN ISO 2063:2005 | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
| BS EN 14449:2005 | Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard |
| BS 6497:1984 | Specification for powder organic coatings for application and stoving to hot-dip galvanized hot-rolled steel sections and preformed steel sheet for windows and associated external architectural purposes, and for the finish on galvanized steel sections and preformed sheet coated with powder organic coatings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.