BS 6461-1:1984
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) Code of practice for masonry chimneys and flue pipes
Hardcopy , PDF
11-30-2008
English
08-31-1984
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Committees responsible
Code
1. Scope
2. Definitions
3. Exchange of information
4. General
4.1 Materials, appliances and components
4.2 Design
4.3 Fireplace recess and throat
4.4 Condensation
4.5 Bends and changes of section
4.6 Openings into flues and communicating flues
4.7 Height and position of chimney outlets above
roofs
4.8 Terminals
5. Masonry chimneys
5.1 General
5.2 Brickwork chimneys
5.3 Blockwork chimneys
5.4 Stonework chimneys
5.5 Concrete chimneys
5.6 Flue block chimneys
6. Flue pipes
6.1 Materials
6.2 Installation
6.3 Fire precautions
6.4 Provision for cleaning
7. Inspection on site
7.1 Masonry chimneys
7.2 Flue pipes
7.3 Testing
Appendices
A. Remedial action for defective chimneys
B. Chimney and flue pipe cleaning and maintenance
Figures
1. Construction of fireplace recess with corbelled
gather
2. Construction of fireplace recess with raft lintel
3. Bends in flues
4. Typical wind pressure and suction zones
5. Minimum chimney heights
6. Typical chimney and flue terminal details
7. Typical flue pipe arrangements
8. Separation of a flue pipe from a combustible surface
Deals with design, construction and testing. Maximum heat output 45 kW. Appendices cover remedial action for defective chimneys, and cleaning and maintenance.
| Committee |
B/506
|
| DevelopmentNote |
Supersedes 80/14018 DC and 85/15888 DC (09/2005)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| BS 8303-1:1994 | Installation of domestic heating and cooking appliances burning solid mineral fuels Installation of domestic heating and cooking appliances burning solid mineral fuels. Specification for the design of installations |
| BS 5449:1990 | Specification for forced circulation hot water central heating systems for domestic premises |
| BS 5871-2:1991 | Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Inset live fuel effect gas fires of heat input not exceeding 15 kW (2nd and 3rd family gases) |
| BS 7256:1990 | Specification for roomheaters burning wood logs |
| I.S. 742-1:1986 | DOMESTIC SOLID-FUELLED HEATING APPLIANCES - PART 1: SAFETY |
| BS 5871-2:2005 | Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Inset live fuel effect gas fires of heat input not exceeding 15 kW, and fire/back boilers (2nd and 3rd family gases) |
| BS 5628-3:2005 | Code of practice for the use of masonry Materials and components, design and workmanship |
| BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
| BS 5440-1:2000 | Installation and maintenance of flues and ventilation for gas appliances of rated heat input not exceeding 70 kW net (1st, 2nd and 3rd family gases) Specification for installation and maintenance of flues |
| BS 1181:1989 | Specification for clay flue linings and flue terminals |
| BS 5262:1991 | Code of practice for external renderings |
| BS 5871-3:2005 | Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Decorative fuel effect gas appliances of heat input not exceeding 20 kW (2nd and 3rd family gases) |
| BS 5871-1:2005 | Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Gas fires, convector heaters, fire/back boilers and heating stoves (2nd and 3rd family gases) |
| BS 6999:1989 | Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW |
| BS 5871-3:1991 | Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Decorative fuel effect gas appliances of heat input not exceeding 15 kW (2nd and 3rd family gases) |
| BS 6700:1987 | Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| BS 7566-2:1992 | Installation of factory-made chimneys to BS 4543 for domestic appliances Specification for installation design |
| BS 6714:1986 | Specification for installation of decorative log and other fuel effect appliances (1st, 2nd and 3rd family gases) |
| BS 7566-4:1992 | Installation of factory-made chimneys to BS 4543 for domestic appliances Recommendations for installation design and installation |
| I.S. 325-2:1995 | CODE OF PRACTICE FOR USE OF MASONRY - PART 2: MASONRY CONSTRUCTION |
| EN 14336:2004 | Heating systems in buildings - Installation and commissioning of water based heating systems |
| BS 7566-1:1992 | Installation of factory-made chimneys to BS 4543 for domestic appliances Method of specifying installation design information |
| BS 8303:1986 | Code of practice for installation of domestic heating and cooking appliances burning solid mineral fuels |
| BS 7566-3:1992 | Installation of factory-made chimneys to BS 4543 for domestic appliances Specification for site installation |
| BS EN 14336:2004 | Heating systems in buildings. Installation and commissioning of water based heating systems |
| BS 1344-3:1967 | Methods of testing vitreous enamel finishes Resistance to products of combustion containing sulphur compounds |
| BS 1251:1970 | Specification for open fireplace components |
| BS 1199 & 1200(1976) : 1976 AMD 5126 | SPECIFICATIONS FOR BUILDING SANDS FROM NATURAL SOURCES |
| BS CP403(1974) : LATEST | CODE OF PRACTICE FOR INSTALLATION OF DOMESTIC HEATING AND COOKING APPLIANCES BURNING SOLID FUEL |
| BS 1014:1975 | Specification for pigments for Portland cement and Portland cement products |
| BS 915:1947 | High alumina cement |
| BS CP110(1972) : LATEST | |
| BS CP114(1969) : AMD 4780 | THE STRUCTURAL USE OF REINFORCED CONCRETE IN BUILDINGS |
| BS 4543-1:1976 | Factory-made insulated chimneys. Methods of test for factory-made insulated chimneys |
| BS 41:1973 | Specification for cast iron spigot and socket flue or smoke pipes and fittings |
| BS 476-3:1975 | Fire tests on building materials and structures External fire exposure roof test |
| BS 5628-3:1985 | Code of practice for use of masonry Materials and components, design and workmanship |
| BS CP3:CH5-2(1972) : AMD 7908 | CODE OF BASIC DATA FOR THE DESIGN OF BUILDINGS - LOADING - WIND LOADS |
| BS 5534-1:1978 | Code of practice for slating and tiling. Design |
| BS 5224:1976 | Specification for masonry cement |
| BS 4543-2:1976 | Factory-made insulated chimneys Specification for chimneys for solid fuel fired appliances |
| BS 1344-7:1984 | Methods of testing vitreous enamel finishes Determination of resistance to heat |
| BS 4543-3:1976 | Factory-made insulated chimneys Specification for chimneys for oil fired appliances |
| BS 12:1978 | Specification for ordinary and rapid-hardening Portland cement |
| BS 890:1972 | Specification for building limes |
| BS 1181:1971 | Specification for clay flue linings and flue terminals |
| BS 6461-2:1984 | Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) Code of practice for factory-made insulated chimneys for internal applications |
| BS 187:1978 | Specification for calcium silicate (sandlime and flintlime) bricks |
| BS CP115(1969) : AMD 2305 | THE STRUCTURAL USE OF PRESTRESSED CONCRETE IN BUILDINGS |
| BS 835:1973 | Specification for asbestos-cement flue pipes and fittings, heavy quality |
| BS 715:1970 | Specification for sheet metal flue pipes and accessories for gas fired appliances |
| BS 3921:1974 | Specification for clay bricks and blocks |
| BS 65:1981 | Specification for vitrified clay pipes, fittings and joints |
| BS 4627(1970) : LATEST | GLOSSARY OF TERMS RELATING TO TYPES OF CEMENTS, THEIR PROPERTIES AND COMPONENTS |
| BS 6073-1:1981 | Precast concrete masonry units Specification for precast concrete masonry units |
| BS 3892-1:1982 | Pulverized-fuel ash Specification for pulverized-fuel ash for use as a cementitious component in structural concrete |
| BS 1198(1976) : LATEST | SPECIFICATIONS FOR BUILDING SANDS FROM NATURAL SOURCES |
| BS 5628-2:1985 | Code of practice for use of masonry Structural use of reinforced and prestressed masonry |
| BS 5628-1:1978 | Code of practice for use of masonry Structural use of unreinforced masonry |
| BS 1344-1:1965 | Resistance to thermal shock of coatings on articles other than cooking utensilsMethods of testing vitreous enamel finishes |
| BS 4729:1971 | Specification for shapes and dimensions of special bricks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.