BS 6399-1:1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LOADING FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DEAD AND IMPOSED LOADS
Hardcopy , PDF
03-30-2010
English
01-01-1996
Foreword
1 Scope
2 References
3 Definitions
4 Dead loads
5 Imposed floor and ceiling loads
6 Reduction in total imposed floor loads
7 Imposed roof loads
8 Crane gantry girders
9 Text deleted
10 Parapets, barriers and balustrades
11 Vehicle barriers for car parks
12 Accidental load on key or protected elements
Annex A (normative) Examples of dynamic loading conditions
for some specific structural types
Tables
List of references
Describes dead and minimum recommended imposed loads to be used in building design, applying to new buildings and new structures, existing construction on change of use.
Committee |
B/525/1
|
DevelopmentNote |
Supersedes 01/104406 DC, 95/100935 DC and BS 6399-1(1984) Also available as part of PP 7312. (11/2002) Reviewed and confirmed by BSI, November 2007. (10/2007)
|
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ENV 1991-2-1 : DRAFT 1995 | Identical |
BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
BS 5950-2:1992 | Structural use of steelwork in building Specification for materials, fabrication and erection: hot-rolled sections |
BS 5268-2:2002 | Structural use of timber Code of practice for permissible stress design, materials and workmanship |
BS 6180:1982 | Code of practice for protective barriers in and about buildings |
BS 5268-3:2006 | Structural use of timber Code of practice for trussed rafter roofs |
BS 7083:1996 | Guide to the accommodation and operating environment for information technology (IT) equipment |
BS 5268-3:1998 | Structural use of timber Code of practice for trussed rafter roofs |
DD ENV 1996-3:2001 | Eurocode 6. Design of masonry structures Simplified calculation methods and simple rules for masonry (together with United Kingdom National Application Document) |
BS 8213-1:2004 | Windows doors and rooflights Design for safety in use and during cleaning of windows, including door-height windows and roof windows. Code of practice |
BS 585-2:1985 | Wood stairs Specification for performance requirements for domestic stairs constructed of wood-based materials |
BS 6262-6:2005 | Glazing for buildings Code of practice for special applications |
BS 4841-3:2006 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes |
BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
BS 5628-1:2005 | Code of practice for the use of masonry Structural use of unreinforced masonry |
BS 5950-3.1(1990) : 1990 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 3: DESIGN IN COMPOSITE CONSTRUCTION - SECTION 3.1: CODE OF PRACTICE FOR DESIGN OF SIMPLE AND CONTINUOUS COMPOSITE BEAMS |
BS 7906-2:2000 | Lifting equipment for performance, broadcast and similar applications Code of practice for use of aluminium and steel trusses and towers |
BS 5975(2008) : 2008 | CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
BS 5061:1974 | Specification for cylindrical forage tower silos and recommendations for their use |
BS 8103-2:2005 | Structural design of low rise buildings Code of practice for masonry walls for housing |
BS 5385-5:2009 | Wall and floor tiling Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice |
BS 5950-1:2000 | Structural use of steelwork in building Code of practice for design. Rolled and welded sections |
BS 4592-0(2006) : 2006 | FLOORING, STAIR TREADS AND HANDRAILS FOR INDUSTRIAL USE - PART 0: COMMON DESIGN REQUIREMENTS AND RECOMMENDATIONS FOR INSTALLATION |
BS 5395-1:2000 | Stairs, ladders and walkways Code of practice for the design, construction and maintenance of straight stairs and winders |
BS 6180:1999 | Barriers in and about buildings. Code of practice |
BS 4841-3:1994 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Specification for two types of laminated board (roofboards) with auto-adhesively bonded reinforcing facings for use as roofboard thermal insulation for built-up roofs |
BS 5385-3:2007 | Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice |
BS 8103-2:1996 | Structural design of low-rise buildings Code of practice for masonry walls for housing |
BS 4841-4:2006 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes |
BS 5628-1:1992 | Code of practice for use of masonry Structural use of unreinforced masonry |
BS 6767-1:1999 | Transportable accommodation units Recommendations for design and construction of the basic unit |
BS 5534-1:1997 | Code of practice for slating and tiling Design |
BS 5268-6.1:1996 | Structural use of timber Code of practice for timber frame walls - Dwellings not exceeding seven storeys |
BS 8217:2005 | Reinforced bitumen membranes for roofing. Code of practice |
BS 5628-2:2000 | Code of practice for use of masonry Structural use of reinforced and prestressed masonry |
BS 5395-2:1984 | Stairs, ladders and walkways Code of practice for the design of helical and spiral stairs |
BS 5628-2:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
BS 6229:2003 | Flat roofs with continuously supported coverings. Code of practice |
BS 5950-5:1998 | Structural use of steelwork in building Code of practice for design of cold formed thin gauge sections |
BS 5454:2000 | Recommendations for the storage and exhibition of archival documents |
BS 4485-4:1996 | Water cooling towers Code of practice for structural design and construction |
BS 5268-7.4:1989 | STRUCTURAL USE OF TIMBER - PART 7: RECOMMENDATIONS FOR THE CALCULATION BASIS FOR SPAN TABLES - SECTION 7.4: CEILING BINDERS |
BS 5268-7.7:1990 | STRUCTURAL USE OF TIMBER - PART 7: RECOMMENDATIONS FOR THE CALCULATION BASIS FOR SPAN TABLES - SECTION 7.7 PURLINS SUPPORTING SHEETING OR DECKING |
BS 5268-7.3:1989 | STRUCTURAL USE OF TIMBER - PART 7: RECOMMENDATIONS FOR THE CALCULATION BASIS FOR SPAN TABLES - SECTION 7.3: CEILING JOISTS |
BS 5268-7.1:1989 | STRUCTURAL USE OF TIMBER - PART 7: RECOMMENDATIONS FOR THE CALCULATION BASIS FOR SPAN TABLES - SECTION 7.1 DOMESTIC FLOOR JOISTS |
BS 5268-7.2:1989 | STRUCTURAL USE OF TIMBER - PART 7: RECOMMENDATIONS FOR THE CALCULATION BASIS FOR SPAN TABLES - SECTION 7.2 JOISTS FOR FLAT ROOFS |
BS 5268-7.5:1990 | STRUCTURAL USE OF TIMBER - PART 7: RECOMMENDATIONS FOR THE CALCULATION BASIS FOR SPAN TABLES - SECTION 7.5: DOMESTIC RAFTERS |
BS 5555:1993 | Specification for SI units and recommendations for the use of their multiples and of certain other units |
BS 6399-2:1995 | Loading for buildings Code of practice for wind loads |
BS 6399-3(1988) : 1988 | LOADING FOR BUILDINGS - PART 3: CODE OF PRACTICE FOR IMPOSED ROOF LOADS |
BS 2655-4:1969 | Specification for lifts, escalators, passenger conveyors and paternosters General requirements for escalators and passenger conveyors |
BS 5400-2:1978 | Steel, concrete and composite bridges Specification for loads |
AS/NZS 1170.1 SUPP 1:2002 | Structural design actions Permanent, imposed and other actions - Commentary (Supplement to AS/NZS 1170.1:2002) (Reconfirmed 2016) |
BS 648:1964 | Schedule of weights of building materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.