BS 5990:2006
Current
The latest, up-to-date edition.
Specification for direct gas-fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases)
Hardcopy , PDF
English
07-20-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of appliances
5 General requirements
6 General conditions of test
7 Design and construction
8 Soundness
9 Heat input
10 Combustion
11 Ignition
12 Flame stability
13 External temperatures
14 Manual gas valves
15 Automatic controls
16 Motors and fans
17 Electricity supply
18 Manufacturer's instructions
19 Facilities for commissioning and testing
20 Identification and marking
21 Air handling
22 Surface heat dissipation
23 Air delivery volume
24 Weather resistance
Bibliography
Provides detailed requirements, including safety and performance requirements and methods of test, for direct gas fired force convection air heaters having heat inputs greater than 330 kW but not exceeding 2 MW, intended for industrial and commercial applications.
| Committee |
GSE/20
|
| DevelopmentNote |
Supersedes BS 5990(1990). (07/2006) Reviewed and confirmed by BSI, December 2011. (11/2011)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This British Standard gives detailed requirements, including safety and performance requirements and methods of test, for direct gas fired forced convection air heaters having heat inputs greater than 330 kW but not exceeding 2 MW, intended for industrial and commercial applications. Appliances covered by this standard are not intended for installation in domestic dwellings.
The scope of this standard includes direct gas fired forced convection air heaters for use both with and without ducting, and intended primarily for space heating applications. It therefore includes air heaters designed to provide make-up air, door curtain heaters, spray booth heaters, portable air heaters and direct fired air heaters capable of providing full space heating.
This standard specifies the requirements for direct gas fired forced convection air heaters designed for permanent outdoor installation. It also specifies the requirements for transportable direct gas fired forced convection air heaters.
This standard applies to appliances designed to operate on normal low pressure district supplies of 2nd family gas.
For appliances fitted with gas boosters, additional requirements may apply.
| BS 476-4:1970 | Fire tests on building materials and structures Non-combustibility test for materials |
| BS EN 437 : 2003 | TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES |
| BS 10:1962 | Specification for flanges and bolting for pipes, valves, and fittings |
| BS 5986:1980 | Specification for electrical safety and performance of gas fired space heating appliances with inputs 60 kW to 2 MW |
| BS 4921:1988 | Specification for sherardized coatings on iron or steel |
| BS 1179-6:1980 | Glossary of terms used in the gas industry Combustion and utilization including installation at consumers\' premises |
| BS EN 10143:2006 | Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape |
| BS EN 257:2010 | Mechanical thermostats for gas-burning appliances |
| BS EN 1092-2:1997 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Cast iron flanges |
| BS EN 61032:1998 | Protection of persons and equipment by enclosures. Probes for verification |
| BS 5000-11(1973) : 1973 | SPECIFICATION FOR ROTATING ELECTRICAL MACHINES OF PARTICULAR TYPES OR FOR PARTICULAR APPLICATIONS - PART 11: SMALL-POWER ELECTRIC MOTORS AND GENERATORS |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| BS EN 60730-2-9:2010 | Automatic electrical controls for household and similar use Particular requirements for temperature sensing controls |
| BS EN 1092-3:2003 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges |
| BS EN 88:1991 | Pressure governors for gas appliances for inlet pressures up to 200 mbar |
| BS EN 161 : 2011 | AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| BS EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads Taper external threads and taper internal threads. Dimensions, tolerances and designation |
| BS 5991:1989 | Specification for indirect gas fired forced convection air heaters with rated heat inputs up to 2 MW for industrial and commercial space heating: safety and performance requirements (excluding electrical requirements (2nd family gases) |
| BS EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads Taper external threads and parallel internal threads. Dimensions, tolerances and designation |
| BS EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| BS 1042-2.1:1983 | Measurement of fluid flow in closed conduits. Velocity area methods Method using Pitot static tubes |
| BS EN 12329:2000 | Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
| BS 476-12:1991 | Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement |
| BS EN 12540:2000 | Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium |
| BS EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
| BS EN 60085:2008 | Electrical insulation. Thermal evaluation and designation |
| BS EN 1515-1:2000 | Flanges and their joints. Bolting Selection of bolting |
| BS EN 1092-1 : 2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - STEEL FLANGES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.