BS 5809:1980
Current
The latest, up-to-date edition.
Specification for safety and efficiency of the gas heating equipment of commercial dishwashing machines
Hardcopy , PDF
English
01-31-1980
Foreword
Cooperating organizations
Specification
Section one. General
1 Scope
2 References
3 Definitions
4 General requirements
5 General conditions of test
Section two. Safety requirements and associated
methods of test
6 Marking and instruction
7 Soundness
8 Heat input
9 Combustion
10 Ignition
11 Flame stability
12 Appliance flue outlet and draught diverter
13 Fire hazard and limited temperatures
14 Gas controls
15 Gas cocks and taps
16 Connections
17 Gas rate and aeration adjusters
18 Electrical
19 Construction and design
20 Pressure water heater
Section three. Efficiency requirements and test methods
21 Efficiency
Figures
1 Bubble leak indicator
2 Apparatus for measuring floor and wall temperatures
Safety requirements, associated test methods and thermal efficiency of gas heating equipment of machines wherein water is either heated by an integral gas burner or by circulating hot water from an adjacent heater, or where a separate heater supplies rinse water.
Committee |
GSE/19
|
DevelopmentNote |
Supersedes 77/77718 DC, BS 2512(1963) and BS 4104(1967) (08/2005) Reviewed and confirmed by BSI, December 2011. (11/2011)
|
DocumentType |
Standard
|
Pages |
20
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This British Standard specifies safety requirements and associated methods of test for the gas heating equipment of the following types: dishwashing machines where water is heated by an integral gas burner; dishwashing machines where water is heated by circulating hot water supplied from an adjacent gas water heater; dishwashing machines where rinse water is supplied by a separate gas water heater. It also specifies requirements for the efficiency of the water heating equipment on these machines. For appliances of the types specified in b) and c) the requirements are mainly satisfied by reference to the appropriate British Standard, but certain additional requirements are detailed to make them suitable for use in this particular application. In specifying requirements for these appliances it is assumed that the gas supply pressure available at the inlet to the appliance will be within the following range under normal operating conditions. Family Pressure range mbara 1st 7.5 to 25 2nd 17.5 to 27.5 3nd butane 28 to 35 propane 37 to 45 a 1 mbar = 102 N/m2 = 0.1 kPa. Requirements for controls given in this standard relate to those fitted as part of, or supplied with, particular appliances: they do not necessarily provide a complete specification for controls intended for general use and tested separately. The attention of manufacturers and installers of equipment covered by this standard is drawn to additional requirements contained in the Health and Safety at Work etc. Act, 1974, in local authority regulations, with particular reference to water supply, in the Factories Act, in the Gas Safety Regulations 1972, in the Building Regulations issued by the Department of the Environment and in the Building Standards (Scotland) (Consolidation) Regulations issued by the Scottish Development Department. Guidance on preferred dimensions may be found in PD 6444.
08/30177380 DC : 0 | BS 6173 - INSTALLATION AND MAINTENANCE OF GAS-FIRED CATERING APPLIANCES FOR USE IN ALL TYPES OF CATERING ESTABLISHMENTS (2ND AND 3RD FAMILY GASES) |
BS 6173:2001 | Specification for installation of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases) |
BS 5963:1981 | Specification for electrically operated automatic gas shut-off valves |
BS 1756-4:1977 | Methods for sampling and analysis of flue gases Miscellaneous analyses |
BS 567:1973 | Specification for asbestos-cement flue pipes and fittings, light quality |
BS 6047-1:1981 | Flame supervision devices for domestic, commercial and catering gas appliances Specification for heat sensitive type |
BS 5978-1:1983 | Safety and performance of gas-fired hot water boilers (60kW to 2 MW input) Specification for general requirements |
BS 3554-1:1971 | Specification for gas governors Independent governors for inlet pressures up to 25 mbar |
BS 3016:1972 | Pressure regulators and automatic changeover devices for liquefied petroleum gases. |
BS 5440-1:1978 | Installation of flues and ventilation for gas appliances of rated input not exceeding 60 kW (1st, 2nd and 3rd family gases). Flues |
BS PD6444-2:SUPP1(1971) : LATEST | |
BS 5978-2:1983 | Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input). Specification for additional requirements for boilers with atmospheric burners |
BS 1963:1969 | Specification for pressure operated relay valves for gas burning appliances |
BS 1756-2:1971 | Methods for the sampling and analysis of flue gases Analysis by the Orsat apparatus |
BS 21:1973 | Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads |
BS 1756-1:1971 | Methods for the sampling and analysis of flue gases Methods of sampling |
BS 1756-3:1971 | Methods for the sampling and analysis of flue gases Analysis by the Haldane apparatus |
BS 835:1973 | Specification for asbestos-cement flue pipes and fittings, heavy quality |
BS PD6444-1(1969) : LATEST | RECOMMENDATIONS FOR THE COORDINATION OF DIMENSIONS IN BUILDING |
BS 4201:1979 | Specification for thermostats for gas-burning appliances |
BS 4947:1973 | Specification for test gases for gas appliances |
BS 5978-3:1983 | Safety and performance of gas-fired hot water boilers (60kW to 2 MW input) Specification for additional requirements for boilers with forced or induced draught burners |
BS 715:1970 | Specification for sheet metal flue pipes and accessories for gas fired appliances |
BS 5494:1978 | Specification for gas taps for domestic and catering appliances |
BS 1552:1982 | Specification for control plug cocks for low-pressure gases |
BS 1179:1967 | Glossary of terms used in the gas industry |
BS 2775:1967 | Specification for rubber stoppers and tubing of flexible materials for laboratory use |
BS 864-2:1971 | Capillary and compression tube fittings of copper and copper alloy. Metric units |
BS 6067:1981 | Specification for multifunctional gas controls for domestic, commercial and catering appliances |
BS 3554-2:1972 | Specification for gas governors Independent governors for inlet pressures up to 350 mbar |
BS PD6444-2(1971) : LATEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.