BS 5482-3:1979
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Domestic butane- and propane-gas-burning installations Installations in boats, yachts and other vessels
Hardcopy , PDF
05-15-1999
English
01-31-1979
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Cooperating organizations
Code of practice
Section one. General
1 Scope
2 References
3 Definitions
Section two. Materials, components and appliances
4 Materials
5 Components
6 Selection of appliances
Section three. Installation design considerations
7 Basic layout of supply system
8 Cylinder requirements design considerations
9 Installation design considerations
10 High pressure stage design considerations
11 Low pressure stage design considerations
12 Siting of appliances
13 Flue design considerations
14 Ventilation design considerations
15 Gas detection
Section four. Installation requirements
16 Installation of unions and joints
17 Installation of pipework
18 Cocks and valves
19 Installation of pressure regulators
20 Installation of appliances
Section five. Inspection, testing and consumer
instructions
21 Inspection and testing of installation and
adjustments
22 Consumer instructions
Appendices
A Information to include in consumer instructions on
the safe use of liquefied petroleum gas in boats,
yachts and other vessels
B Testing of low pressure stage of installation
C Testing of low pressure stage of installation for
pressure loss
Table
1 Appliance rates, number of cylinders and cylinder
offtakes
Figures
1 High pressure stage manifolds
2 Pipe sizing chart
3 Installation test apparatus
4 Bubble leak indicator
5 Standard nozzle pressure point adaptor and washer
for 8 mm (5/16 in) i.d. flexible tubing
Installations using commercial butane and commercial propane at pressures of 28 mbar and 37 mbar respectively. Materials, installation and design requirements, testing and basic user guidance on safe practice. Does not cover the use of liquefied petroleum gas for craft propulsion, installation of bulk supply and portable appliances.
| Committee |
GSE/24
|
| DevelopmentNote |
THIS STANDARD, OR A REVISION OR NEW EDITION OF THIS STANDARD, IS BEING CONSIDERED UNDER THE APPROVAL OF SAFETY STANDARDS REGULATIONS 1987. REPLACES CP 339: PART 3:1956.
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| BS 5258-10:1980 | Safety of domestic gas appliances Flueless space heaters (excluding catalytic combustion heaters) (3rd family gases) |
| BS 5258-11:1980 | Safety of domestic gas appliances Flueless catalytic combustion heaters (3rd family gases) |
| BS 5258-7:1977 | Safety of domestic gas appliances Storage water heaters |
| BS 6172:1990 | Specification for installation of domestic gas cooking appliances (1st, 2nd and 3rd family gases) |
| BS 5546:2000 | Specification for installation of hot water supplies for domestic purposes, using gas-fired appliances of rated input not exceeding 70 kW |
| BS 5258-6:1988 | Safety of domestic gas appliances Specification for refrigerators and food freezers |
| BS 5440-2:1989 | Installation of flues and ventilation for gas appliances of rated input not exceeding 60 kW (1st, 2nd and 3rd family gases). Specification for installation of ventilation for gas appliances |
| BS 5258-1:1986 | Safety of domestic gas appliances Specification for central heating boilers and circulators |
| BS 5440-2:2000 | Installation and maintenance of flues and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) Specification for installation and maintenance of ventilation for gas appliances |
| BS 3879:1981 | Specification for portable appliances operating at vapour pressure from liquefied petroleum gas containers |
| BS 5258-4:1987 | Safety of domestic gas appliances Specification for fanned-circulation ducted-air heaters |
| BS 5386-4:1991 | Specification for gas burning appliances Built-in domestic cooking appliances |
| BS 5502-25:1991 | Buildings and structures for agriculture Code of practice for design and installation of services and facilities |
| BS 6798:1987 | Specification for installation of gas-fired hot water boilers of rated input not exceeding 60 kW |
| BS 5258-9:1989 | Safety of domestic gas appliances Specification for combined appliances: fanned-circulation ducted-air heaters/circulators |
| BS 5258-15:1990 | Safety of domestic gas appliances Specification for combination boilers |
| BS 7624:1993 | Specification for installation of domestic direct gas-fired tumble dryers of up to 3kW heat input (2nd and 3rd family gases) |
| BS 5864:1989 | Specification for installation in domestic premises of gas-fired ducted-air heaters of rated input not exceeding 60 kW |
| BS 5386-1:1976 | Specification for gas burning appliances Gas burning appliances for instantaneous production of hot water for domestic use |
| BS 2871-1:1971 | Specification for copper and copper alloys. Tubes Copper tubes for water, gas and sanitation |
| BS 5440-1:1978 | Installation of flues and ventilation for gas appliances of rated input not exceeding 60 kW (1st, 2nd and 3rd family gases). Flues |
| BS 4368-3:1974 | Metallic tube connectors for fluid power and general use Specification for light series couplings (metric) |
| BS 1494-2:1967 | Specification for fixing accessories for building purposes Sundry fixings |
| BS 5045-2:1989 | Transportable gas containers Specification for steel containers of 0.5 L up to 450 L water capacity with welded seams |
| BS 1494-1:1964 | Specification for fixing accessories for building purposes Fixings for sheet, roof and wall coverings |
| BS 5258-11:1980 | Safety of domestic gas appliances Flueless catalytic combustion heaters (3rd family gases) |
| BS 2871-2:1972 | Specification for copper and copper alloys. Tubes Tubes for general purposes |
| BS 2773(1965) : LATEST | DOMESTIC SINGLE-ROOM SPACE HEATING APPLIANCES FOR USE WITH LIQUEFIED PETROLEUM GASES |
| BS 4683-2:1971 | Specification for electrical apparatus for explosive atmospheres The construction and testing of flameproof enclosures of electrical apparatus |
| BS 476-8:1972 | Fire tests on building materials and structures Test methods and criteria for the fire resistance of elements of building construction |
| BS 4368-1:1972 | Compression couplings for tubes Specification for heavy series couplings (metric) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.