BS 5482-1:2005
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Code of practice for domestic butane- and propane-gas-burning installations Installations at permanent dwellings, residential park homes and commercial premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stainless steel or copper
Hardcopy , PDF
12-24-2020
English
01-20-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Exchange of information and installation planning
5 Materials
6 Valves
7 Regulators
8 Joints
9 Corrosion
10 Selection of appliances
11 LPG supply arrangements
12 Installation
13 Inspection, testing and user instructions
Annex A (normative) Gas soundness testing of LPG service pipework,
installation pipework, and appliances
Annex B (informative) Guide for sizing gas supply pipes
Annex C (informative) Model emergency action notice or leaflet for
users of LPG
Bibliography
Provides guidance and recommendations for the installation of liquefied petroleum gas (LPG) supply systems at permanent dwellings, including residential park homes, and small commercial premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stainless steel or copper.
| Committee |
GSE/24
|
| DevelopmentNote |
Supersedes BS 5482-1(1994) and 00/716887 DC. Partially supersedes BS 5482-2(1977). (01/2005) Reviewed and confirmed by BSI, September 2010. (08/2010)
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
This Part of BS5482 gives guidance and recommendations for the installation of liquefied petroleum gas (LPG) supply systems at permanent dwellings, including residential park homes, and small commercial premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stainless steel or copper. It applies to systems using either commercial propane from cylinders or bulk supply at a pressure of 37 mbar, or commercial butane from cylinders at a pressure of 28 mbar. It makes recommendations on the selection of materials and components, on design considerations, on installation, on inspection and testing and on user instructions.
NOTE1 Gas storage and distribution systems for multiple consumers are outside the scope of this standard.
This standard does not cover the installation requirements of bulk tanks supplying LPG, for which guidance is given in LPGA Code of Practice 1, Parts1, 2, and 4.[7].
Appliances incorporating their own gas supply, such as mobile heaters, are not considered to be part of the installation and are thus outside the scope of this standard.
NOTE2 It is recognized that this standard may be referred to for LPG installations other than those concerned with domestic systems at permanent dwellings and residential park homes. In these instances it has to be borne in mind that other codes of practice,
standards and regulations may apply.
This standard does not cover leisure accommodation vehicles (see BSEN1949).
| BS EN 1949 : 2011 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| BS 3016:1989 | Specification for pressure regulators for liquefied petroleum gases |
| BS 1179-6:1980 | Glossary of terms used in the gas industry Combustion and utilization including installation at consumers\' premises |
| BS 1710:1984 | Specification for identification of pipelines and services |
| BS 6700:1997 | Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages |
| BS 6956-1:1988 | Jointing materials and compounds Specification for corrugated metal joint rings |
| BS 3974-1:1974 | Specification for pipe supports Pipe hangers, slider and roller type supports |
| BS 6004:2000 | Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring |
| BS EN 1057 : 2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| BS EN 1044:1999 | Brazing. Filler metals |
| BS 7786:1995 | Specification for unsintered PTFE tape. General requirements |
| BS EN 29453:1994 | Soft solder alloys. Chemical compositions and forms |
| BS 7281:1990 | Specification for polyethylene pipes for the supply of gaseous fuels |
| BS 1387:1985 | Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads |
| BS 1494-1:1964 | Specification for fixing accessories for building purposes Fixings for sheet, roof and wall coverings |
| BS 7671(2001) : 2001 AMD 14905 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS |
| BS 1723:1963 | Specification for brazing |
| BS 7336:1990 | Specification for polyethylene fusion fittings with integral heating element(s) for use with polyethylene pipes for the conveyance of gaseous fuels |
| BS EN 1254-2:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes |
| BS 6172:2004 | Installation and maintenance of domestic gas cooking appliances (2nd and 3rd family gases). Specification |
| BS 7838:1996 | Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to DN 50 |
| BS 5449:1990 | Specification for forced circulation hot water central heating systems for domestic premises |
| BS 3212:1991 | Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations |
| BS EN 837-1:1998 | Pressure gauges Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing |
| BS 5114:1975 | Specification for performance requirements for joints and compression fittings for use with polyethylene pipes |
| BS 6956-6:1992 | Jointing materials and compounds Specification for jointing compounds for 3rd family gases |
| BS 6173:2001 | Specification for installation of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases) |
| BS 1179:1967 | Glossary of terms used in the gas industry |
| BS 6956-7:1992 | Jointing materials and compounds Specification for anaerobic jointing compounds for use with 1st, 2nd and 3rd family gases |
| BS EN 13878:2003 | Leisure accommodation vehicles. Terms and definitions |
| BS EN 12864 : 2001 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 1254-1:1998 | Copper and copper alloys. Plumbing fittings Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| BS EN 10242:1995 | Threaded pipe fittings in malleable cast iron |
| BS 6956-5:1992 | Jointing materials and compounds Specification for jointing compounds for use with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd family gases |
| BS 3632:1995 | Specification for residential park homes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.