BS 5410-2:1978
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Code of practice for oil firing Installations of 45 kW and above output capacity for space heating, hot water and steam supply services
Hardcopy , PDF
03-31-2013
English
02-06-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Cooperating organizations
Code
Section one. General
1. Scope
2. References
Section two. Oil fuels
3. Types of petroleum oil fuels
4. Typical characteristics of petroleum oil fuels
Section three. Application of oil burners
5. General
6. Choice of grade of oil fuel
7. Boilers
8. Warm air heaters
Section four. Methods of combustion air supply and of
draught production and control
9. Combustion air supply
10. Induced draught and forced draught
11. Conversions from solid fuel to oil firing
Section five. Selection of burners
12. General
13. Types of burner
14. Types of burner control
15. Choosing oil burner equipment: factors to consider
16. Application of burner types
Section six. Oil tanks and equipment
17. Construction
18. Capacity
19. Choice of number and type of tanks
20. Design and test conditions
21. Measurement of contents of oil storage tanks
22. Precautions against overfilling
23. Filling pipes and connections
24. Vent pipes
25. Drain valves
26. Multiple storage tanks with return line connections
27. Installation of oil storage tanks
28. Painting and cleaning
29. Heating for oil tanks containing classes E, F, G
and H fuels
30. Service tanks
31. Roof-top tanks
32. Fire precautions
Section seven. Oil handling systems from storage tank
to burner
33. General
34. Distillate oil fuel systems (classes C2 and D fuels)
35. Heated oil fuel systems (classes E, F, G and H)
36. Roof-top systems
37. Size of oil pipelines
38. Materials and erection of oil pipelines
39. Testing
40. Painting and identification
Section eight. Design and construction of accommodation
for oil fired installations
41. Introduction
42. Classification of buildings
43. Accommodation for boilers
44. Warm air heater installations
45. Accommodation for oil storage and service tanks
Section nine. Chimney and flue systems
46. Definitions
47. Chimneys
48. Flue ducts
49. Dampers, draught control and combustion excess
pressure-relief devices
50. Induced-draught fans
Section ten. Electrical equipment
51. General
52. Wiring
53. Motors and motor control gear
Section eleven. Instrumentation
54. General
55. Essential instrumentation
56. Other instrumentation
Section twelve. Commissioning, performance tests and
handover
57. Commissioning arrangements
58. Precommissioning procedure
59. Commissioning procedure
60. Performance tests
61. Handover
Section thirteen. Maintenance
62. General
63. Supplier's and/or installer's responsibility
64. User's responsibility
Section fourteen. Safety provisions
65. General
66. Oil handling system
67. Fire valve system
68. Housekeeping
69. Protection against combustion explosions
70. Fire prevention
Tables
1. Specification data for petroleum oil fuels as
given in BS 2869: 1970
2. Typical characteristics of petroleum oil fuels
3. Minimum tank, outflow and handling temperature
for petroleum oil fuels
4. Fire resistance: recommended types of construction
for boiler room enclosures, doors and windows in
'large buildings' and places of public entertain-
ment or assembly
5. Fire resistance: recommended types of construction
for boiler room enclosures, doors and windows in
all buildings other than 'large buildings' and
places of public entertainment or assembly
6. Examples of types of construction for the
recommended standards of fire resistance given
in tables 4 and 5
7. Fire resistance: recommended types of construction
for tank chamber enclosures and the doors and
openings therein in 'large buildings' and places
of public entertainment or assembly
8. Fire resistance: recommended types of construction
for tank chamber enclosures and the doors and
openings therein in all buildings other than
'large buildings' and places of public
entertainment or assembly
Deals with the provision of new - or modernizing of existing - oil burning systems for petroleum oil fuel as applied to boiler and warm air heater plants and associated oil tanks. Does not apply to marine installations or flueless heaters.
| Committee |
RHE/13
|
| DevelopmentNote |
Supersedes 00/715831 DC and 76/70338 DC. (02/2002) Supersedes BS CP3002-2(1964) (07/2004) Reviewed and confirmed by BSI, November 2008. (11/2008)
|
| DocumentType |
Standard
|
| Pages |
74
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| 12/30259259 DC : 0 | BS 6380 - GUIDE TO LOW TEMPERATURE PROPERTIES AND COLD WEATHER USE OF DIESEL FUELS AND GAS OILS |
| BS 5588-11:1997 | Fire precautions in the design, construction and use of buildings Code of practice for shops, offices, industrial, storage and other similar buildings |
| BS 799-2:1981 | Specification for oil burning equipment Vaporizing burners |
| BS 5588-1:1990 | Fire precautions in the design, construction and use of buildings Code of practice for residential buildings |
| BS 8210:1986 | Guide to building maintenance management |
| BS 7880:1997 | Code of practice for draught control of existing doors and windows in housing using draughtstrips |
| BS DD9999(2005) : 2005 | CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS |
| BS 5588-10:1991 | Fire precautions in the design, construction and use of buildings Code of practice for shopping complexes |
| BS 2869:2006 | Fuel oils for agricultural, domestic and industrial engines and boilers. Specification |
| EN 12391-1:2003 | Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
| BS 9999:2008 | Code of practice for fire safety in the design, management and use of buildings |
| 10/30218583 DC : 0 | BS 2869 - FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
| BS 5885(1980) : AMD 5019 | INDUSTRIAL GAS BURNERS, OF INPUT RATING 60 KW AND ABOVE |
| BS 5588-6:1991 | Fire precautions in the design, construction and use of buildings Code of practice for places of assembly |
| BS 2869-2:1988 | Fuel oils for non-marine use Specification for fuel oil for agricultural and industrial engines and burners (classes A2, C1, C2, D, E, F, G and H) |
| BS 5588-2:1985 | Fire precautions in the design, construction and use of buildings Code of practice for shops |
| BS 6880-1:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Fundamental and design considerations |
| BS 5410-3:1976 | Code of practice for oil firing Installations for furnaces, kilns, ovens and other industrial purposes |
| BS 779:1989 | Specification for cast iron boilers for central heating and indirect hot water supply (rated output 44 kW and above) |
| BS 5885-1:1988 | Automatic gas burners Specification for burners with input rating 60 kW and above |
| BS 799-4:1991 | Oil burning equipment Specification for atomizing burners (other than monobloc type) together with associated equipment for single burner and multi burner installations |
| BS 6380(2012) : 2012 | GUIDE TO LOW TEMPERATURE PROPERTIES AND COLD WEATHER USE OF DIESEL FUELS AND GAS OILS |
| BS 855:1990 | Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW) |
| BS 6380:1997 | Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869 |
| BS 799-5:1987 | Oil burning equipment Specification for oil storage tanks |
| BS 5440-2:2000 | Installation and maintenance of flues and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) Specification for installation and maintenance of ventilation for gas appliances |
| PD 6686:2006 | Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries |
| BS 9991:2011 | Fire safety in the design, management and use of residential buildings. Code of practice |
| 11/30203947 DC : 0 | BS 9991 - FIRE SAFETY IN THE DESIGN, MANAGEMENT AND USE OF RESIDENTIAL BUILDINGS - CODE OF PRACTICE |
| BS 6880-2:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Selection of equipment |
| BS PAS 2030(2012) : 2012 | IMPROVING THE ENERGY EFFICIENCY OF EXISTING BUILDINGS - SPECIFICATION FOR INSTALLATION PROCESS, PROCESS MANAGEMENT AND SERVICE PROVISION |
| BS 6700:1987 | Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages |
| BS 6380:1983 | Guide to low temperature properties and cold weather use of diesel fuels and gas oils (classes A1, A2 and D of BS 2869) |
| BS EN 12391-1:2003 | Chimneys. Execution standard for metal chimneys Chimneys for non-roomsealed heating appliances |
| EN 14336:2004 | Heating systems in buildings - Installation and commissioning of water based heating systems |
| BS 5925:1980 | Code of practice for design of buildings: ventilation principles and designing for natural ventilation |
| BS 5588-3:1983 | Fire precautions in the design, construction and use of buildings Code of practice for office buildings |
| BS EN 14336:2004 | Heating systems in buildings. Installation and commissioning of water based heating systems |
| BS 2869(2010) : 2010 | FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
| BS 2869:1998 | Specification for fuel oils for agricultural, domestic and industrial engines and boilers |
| BS EN 50021:1999 | Electrical apparatus for potentially explosive atmospheres. Type of prot ection \'n\' |
| BS 1710:1984 | Specification for identification of pipelines and services |
| PREN 13482 : DRAFT 2012 | RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
| BS EN 303-2:2017 | Heating boilers Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners |
| BS EN 303-1:2017 | Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
| BS EN 303-4:1999 | Heating boilers. Heating boilers with forced draught burners Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking |
| BS EN 55014 : 93 AMD 9683 | LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF ELECTRICAL MOTOR-OPERATED AND THERMAL APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES, ELECTRIC TOOLS AND SIMILAR ELECTRICAL APPLIANCES |
| BS 41:1973 | Specification for cast iron spigot and socket flue or smoke pipes and fittings |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| BS 799-4:1972 | Specification for oil burning equipment Atomizing burners over 36 litres per hour and associated equipment for single burner and multi burner installations |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| BS EN 1443:2003 | Chimneys. General requirements |
| BS 4256-2:1972 | Specification for oil-burning air heaters Fixed, flued, fan-assisted heaters |
| BS EN 60947-4-1 : 2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| BS EN 60470:2001 | High-voltage alternating current contactors and contactor-based motor starters |
| BS 476-8:1972 | Fire tests on building materials and structures Test methods and criteria for the fire resistance of elements of building construction |
| BS 845:1972 | Acceptance tests for industrial type boilers and steam generators |
| BS 2869:1998 | Specification for fuel oils for agricultural, domestic and industrial engines and boilers |
| BS 1564:1975 | Specification for pressed steel sectional rectangular tanks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.