BS 534:1990
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Specification for steel pipes, joints and specials for water and sewage
Hardcopy , PDF
01-01-2012
English
08-31-1990
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Committees responsible
Foreword
Specification
Section 1. General
1 Scope
2 Information to be supplied by the purchaser
3 Definitions
4 Designation of size
5 Materials
6 Effect of non-metallic products on water quality
7 Marking
8 Manufacturer's and test certificates
Section 2. Pipes
9 Sizes, masses per unit length and test pressures of
pipes
10 Length
Section 3. Joints
11 Types of joints
12 Butt-welded joints
13 Sleeve joints for welding
14 Slip-on type couplings
15 Flange joints
16 Threaded and coupled joints
Section 4. Specials
17 Fabrication
18 Testing
19 Tolerances
20 Even curvature manipulated bends
21 Gusseted bends
22 Tees
23 Welding collars
Section 5. Protection against corrosion
24 Surface preparation
25 Coatings and linings
26 External protection
27 Internal protection
28 Tests on applied external and internal protections
29 Concrete lining and cement mortar lining of pipes
30 Stop back of protection at ends
31 Completion of protections at joints
32 Protection of coated and lined pipes against damage
in storage, transport and handling
Appendices
A Essential information to be supplied by the
purchaser in the enquiry and order
B Purchaser options
C Electrical test for continuity
Tables
1 Minimum nominal thickness, mass per metre length and
hydraulic test pressure for steel pipes
2 End tolerances
3 Lengths of slip-on type coupling sleeves
4 Tolerances on outside diameter on length L
5 Coupler recess dimensions: taper threading to BS 21
6 Coupler recess dimensions: taper threading to API
standard 5B
7 Dimensions of even curvature bends: sizes 60.3 mm to
323.9 mm o.d. inclusive
8 Dimensions of gusseted bends: pipe sizes 114.3 mm to
2235 mm o.d. inclusive
9 Dimensions of tees: pipe sizes 60.3 mm to 2234 mm
o.d. inclusive
10 Thickness of bitumen sheathing material
11 Thickness of polyethylene
12 Thickness of bitumen lining material
13 Thickness of concrete lining
14 Thickness of cement mortar lining
Figures
1 Butt-welded joint preparation
2 Sleeve welded joints
3 Slip-on type couplings
4 Threaded and coupled joints recessed for bitumen
lining
5 Even curvature bend of 90 deg
6 Even curvature bend less than 90 deg
7 Gusseted bend type 1, not more than 30 deg
8 Gusseted bend type 2, over 30 deg up to 60 deg
9 Gusseted bend type 3, over 60 deg up to 90 deg
10 Plain end tee for slip-on type coupling and butt-
welded joint
11 Sleeve joint tee for welding
12 Tee with flanged branch
13 Welding collar
Requirements for seamless and welded carbon steel pipes and specials and for joints in respect of the pipe end preparation in sizes 60.3 mm to 2235 mm outside diameter.
| Committee |
ISE/110
|
| DevelopmentNote |
Supersedes BS 534(1981) and 88/73158 DC. (02/2003)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| BS 8558:2011 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
| BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
| BS 4164:2002 | Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer |
| BS 6700:1997 | Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages |
| BS 6700(2006) : 2006 | DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - SPECIFICATION |
| BS 3445-1:1992 | Agricultural water troughs and water fittings Specification for water trough bodies, service boxes and water supply system |
| BS 8301:1985 | Code of practice for building drainage |
| BS 882:1992 | Specification for aggregates from natural sources for concrete |
| BS 10:1962 | Specification for flanges and bolting for pipes, valves, and fittings |
| BS 4504-3.1:1989 | Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges Specification for steel flanges |
| BS 4164:2002 | Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer |
| BS 4232:1967 | Specification for surface finish of blast-cleaned steel for painting |
| BS 1560-3.1:1989 | Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for steel flanges |
| BS 3600:1997 | Specification for dimensions and masses per unit length of welded and seamless steel pipes and tubes for pressure purposes |
| BS 1387:1985 | Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| BS CP2010-2(1970) : 1970 | PIPELINES - PART 2: DESIGN AND CONSTRUCTION OF STEEL PIPELINES IN LAND |
| BS 4027:1996 | Specification for sulfate-resisting Portland cement |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.