BS 466:1984
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Specification for power driven overhead travelling cranes, semi-goliath and goliath cranes for general use
Hardcopy , PDF
09-13-2015
English
06-29-1984
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Committees responsible
Foreword
Section 1 - General
1 Scope
2 Definitions
3 Information to be provided
4 Classification
5 Service conditions
Section 2 - Structural
6 Permissible stresses in structures
7 Vertical deflection
8 Vibration of crane structure
9 Structural sections
10 Joints
11 Bridge girder
12 End carriages
13 Buffers
14 End stops
15 Drop stops
16 Access platforms, walkways, ladders and stairs
17 Emergency escape provision
18 Driver's cabin
Section 3 - Mechanical
19 Permissible stresses in mechanisms
20 Brakes
21 Motion limiting devices
22 Load indication and limiting devices
23 Gearboxes
24 Lubrication of bearings
25 Keys, keyways, splines and serrations
26 Guarding
Section 4 - Electrical
27 General
28 Power supply
29 Earthing
30 Power distribution
31 Control equipment
32 Resistor rating
33 Motors for crane motion drives
34 Enclosures
35 Brakes
36 Power supplies for auxiliary equipment
37 Heaters
38 Radio interference
39 Cables and conductors
Section 5 - Protection and painting
40 Protection and painting of metalwork
41 Surface condition of structural members
42 Protection of machinery
Section 6 - Testing, marking and certification
43 Testing at manufacturer's works
44 Testing after final assembly and before putting
into service
45 Marking
46 Technical information
47 Test certificates
Appendix A - Information to be supplied with
enquiry or order
Appendix B - Crane performance
Appendix C - Information to be supplied by
manufacturer
Appendix D - Classification of cranes and crane
mechanisms
Appendix E - Noise
Appendix F - Crane gantries
Appendix G - United Kingdom and EEC legislation
relating to power driven overhead
travelling cranes
Appendix H - Headroom clearances, platform and
walkway widths
Appendix J - List of British Standards for materials
and equipment suitable for use in the
manufacture of cranes
Publications referred to
Cranes power driven in all motions for working indoors or exposed. Covers classification and design requirements for structure and mechanisms, brakes, controls, motors, electrical protective gear, lighting and heating. Stipulates compliance with BS 2573:Parts 1 and 2 and includes testing requirements.
| Committee |
MHE/3/3
|
| DevelopmentNote |
Supersedes BS 3579(1963) and 80/78528 DC. (07/2005) Reviewed and confirmed by BSI, December 2012. (11/2012)
|
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| UNE-EN IEC 60193:2019 | Identical |
| ISO 8306:1985 | Similar to |
| BS 7262:1990 | Specification for automatic safe load indicators |
| BS 6166-1:1986 | Lifting slings Methods of rating |
| BS 7333:1990 | Specification for slewing jib cranes |
| BS 7375:1996 | Code of practice for distribution of electricity on construction and building sites |
| BS 7375:2010 | Distribution of electricity on construction and demolition sites. Code of practice |
| BS 1916-2:1953 | Limits and fits for engineering Guide to the selection of fits in BS 1916:Part 1 |
| BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
| BS 5000-99:1973 | Rotating electrical machines of particular types or for particular applications Machines for miscellaneous applications |
| BS 4500(1969) : LATEST | |
| ISO 2408:2017 | Steel wire ropes — Requirements |
| BS 4235(1967) : LATEST | |
| BS 46-1:1958 | Keys and keyways and taper pins Specification. Keys and keyways |
| BS 916:1953 | Specification for black bolts, screws and nuts, hexagon and square, with B.S.W. threads, and partly machined bolts, screws and nuts, hexagon and square, with B.S.W. or B.S.F. threads |
| BS 31:1940 | Specification. Steel conduit and fittings for electrical wiring |
| BS 4211(2005) : 2005 | SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| ISO 4301:1980 | Lifting appliances Classification |
| BS 3139-1:1959 | Specification for high strength friction grip bolts for structural engineering. General grade bolts |
| BS 1486-1:1959 | Lubricating nipples Lubricating nipples and adaptors for use on machinery and vehicles |
| BS 545:1982 | Specification for bevel gears (machine cut) |
| BS 3294-1:1960 | Specification for the use of high strength friction grip bolts in structural steelwork General grade bolts |
| BS 4604-1:1970 | SPECIFICATION FOR THE USE OF HIGH STRENGTH FRICTION GRIP BOLTS IN STRUCTURAL STEELWORK METRIC SERIES - PART 1: GENERAL GRADE |
| BS 3037-1:1958 | Specification for tyres for crane rail wheels Double-flanged parallel-tread tyres |
| BS 3643(1963) : LATEST | |
| BS 4395-1:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade |
| BS 449-1:1970 | Specification for the use of structural steel in building. Imperial units |
| BS 3551:1962 | Specification for alloy steel shackles |
| BS 2452:1954 | Specification for electrically driven jib cranes mounted on a high pedestal or portal carriage (high pedestal or portal jib cranes) |
| BS 4752-1:1977 | Specification for switchgear and controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. Circuit-breakers |
| BS 1083:1965 | Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads) |
| BS 5135:1984 | Specification for arc welding of carbon and carbon manganese steels |
| BS 196:1961 | Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts |
| BS 357:1958 | Specification for power-driven travelling jib cranes (rail-mounted low carriage type) |
| BS 4604-3(1970) : LATEST | |
| BS 310:1972 | Specification for blackheart malleable iron castings |
| BS 5345-3:1979 | Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Installation and maintenance requirements for electrical apparatus with type of protection \'d\'. Flameproof enclosure |
| BS 4232:1967 | Specification for surface finish of blast-cleaned steel for painting |
| BS 5345-8:1980 | Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Installation and maintenance requirements for electrical apparatus with type of protection \'s\'. Special protection |
| BS 6004:2000 | Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring |
| BS 309:1972 | Specification for whiteheart malleable iron castings |
| BS 23:1970 | Specification for copper and copper-cadmium trolley and contact wire for electric traction |
| BS 3134:1968 | Dimensions of tapered roller bearings |
| BS 5395-3:1985 | Stairs, ladders and walkways Code of practice for the design of industrial type stairs, permanent ladders and walkways |
| BS 302:1968 | Specification for wire ropes for cranes, excavators and general engineering purposes |
| BS 4235-1:1972 | Specification for metric keys and keyways Parallel and taper keys |
| BS 24-3B:1955 | Railway rolling stock material Specification for helical and volute springs and spring steels |
| BS 970(1972) : LATEST | |
| BS 2045:1965 | Preferred numbers |
| 1973/23/EEC : 1973 | COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS |
| BS 5304:1988 | Code of practice for safety of machinery |
| BS 5345-4:1977 | Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Installation and maintenance requirements for electrical apparatus with type of protection \'i\'. Intrinsically safe electrical apparatus and systems |
| BS 275:1927 | Specification for dimensions of rivets (½ inch to 1¾ inch diameter) |
| BS 5378-1:1980 | Safety signs and colours Specification for colour and design |
| BS 587:1957 | Specification. Motor starters and controllers |
| BS 5419:1977 | Specification for air-break switches, air-break disconnectors, air-break switch disconnectors and fuse-combination units for voltages up to and including 1000 V a.c. and 1200 V d.c. |
| BS 464:1958 | Specification for thimbles for wire ropes |
| BS 1486-2:1961 | Lubricating nipples Heavy duty lubricating nipples |
| BS 436-2:1970 | Spur and helical gears Basic rack form, modules and accuracy (1 to 50 metric module) |
| BS 2789:1985 | Specification for spheroidal graphite or nodular graphite cast iron |
| BS 5345-7:1979 | Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Installation and maintenance requirements for electrical apparatus with type of protection N |
| BS 4604-2:1970 | SPECIFICATION FOR THE USE OF HIGH STRENGTH FRICTION GRIP BOLTS IN STRUCTURAL STEELWORK - METRIC SERIES - HIGHER GRADE (PARALLEL SHANK) |
| BS 6346:1997 | Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V |
| BS 436-1:1967 | Spur and helical gears Basic rack form, pitches and accuracy (diametral pitch series) |
| BS 3037-2:1975 | Specification for tyres for crane rail wheels Forged or rolled steel double flanged rail wheels and tyres (metric units) |
| BS 327:1964 | Specification for power-driven derrick cranes |
| BS 833:1970 | Specification for radio interference limits and measurements for the electrical ignition systems of internal combustion engines |
| BS 5744:1979 | Code of practice for safe use of cranes (overhead/underhung travelling and goliath cranes, high pedestal and portal jib dockside cranes, manually-operated and light cranes, container handling cranes and rail-mounted low carriage cranes) |
| BS 2799:1974 | Specification for power-driven tower cranes for building and engineering construction |
| BS 228:1994 | Specification for short-pitch transmission precision roller chains and chain wheels |
| BS 5345-2:1983 | Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Classification of hazardous areas |
| BS 1761:1951 | Specification for single bucket excavators of the crawler-mounted friction-driven type |
| BS 3530:1968 | Specification for small wire ropes |
| BS 4568-2:1970 | Specification for steel conduit and fittings with metric threads of ISO form for electrical installations Fittings and components |
| BS 5345-6:1978 | Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Recommendations for type of protection \'e\'. Increased safety |
| BS 4395-2:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts and nuts and general grade washers |
| BS 3579(1963) : LATEST | SPECIFICATION FOR HEAVY DUTY ELECTRIC OVERHEAD TRAVELLING AND SPECIAL CRANES FOR USE IN STEEL WORKS |
| BS 463-1:1958 | Specification for sockets for wire ropes Inch units |
| BS 3550:1963 | Specification for involute splines |
| BS 3032:1958 | Specification for higher tensile steel shackles |
| BS 3692:2001 | ISO metric precision hexagon bolts, screws and nuts. Specification |
| BS 5395-2:1984 | Stairs, ladders and walkways Code of practice for the design of helical and spiral stairs |
| BS 2573-2:1980 | Rules for the design of cranes Specification for classification, stress calculations and design of mechanisms |
| BS 2523:1966 | Specification for lead-based priming paints |
| BS 5424-1:1977 | Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. Contactors |
| BS 4620:1970 | Specification for rivets for general engineering purposes |
| BS 4678-1:1971 | Cable trunking Steel surface trunking |
| BS 5216:1991 | Specification for patented cold drawn steel wire for mechanical springs |
| BS 3535:1962 | Specification for safety isolating transformers for industrial and domestic purposes |
| BS 4999-32:1972 | Limits of temperature rise and methods of temperature measurementSpecification for general requirements for rotating electrical machines |
| BS 4568-1:1970 | Specification for steel conduit and fittings with metric threads of ISO form for electrical installations Steel conduit, bends and couplers |
| BS 463-2:1970 | Specification for sockets for wire ropes Metric units |
| BS 5345-1:1989 | Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) General recommendations |
| BS 3410:1961 | Specification for metal washers for general engineering purposes |
| BS 461:1970 | Specification for Bordeaux connections |
| BS 462:1983 | Specification for wire rope grips |
| BS 2059:1953 | Specification for straight-sided splines and serrations |
| BS 1916-3:1963 | Limits and fits for engineering Recommendations for tolerances, limits and fits for large diameters |
| BS 5345-1:1976 | Code of practice for the selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Basic requirements for all Parts of the code |
| BS 3017:1958 | Specification for mild steel forged ramshorn hooks |
| BS 4999-30:1972 | Duty and ratingSpecification for general requirements for rotating electrical machines |
| BS 4395-3:1973 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts (waisted shank), nuts and general grade washers |
| BS 449-2:1969 | Specification for the use of structural steel in building Metric units |
| BS 3698:1964 | Specification for calcium plumbate priming paints |
| BS 46-3:1951 | Keys and keyways and taper pins Specification for solid and split taper pins for general engineering purposes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.