BS 4483:2005
Current
The latest, up-to-date edition.
Steel fabric for the reinforcement of concrete. Specification
Hardcopy , PDF
English
04-30-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Designation
6 Manufacturing processes
7 Product characteristics
8 Evaluation of conformity
9 Test methods
10 Identification of the manufacturer and steel grade
11 Verification of mechanical properties in the case
of dispute
Annex A (informative) - Notation and classification
of fabric
Annex B (normative) - Material not covered by a third
party product certification scheme
Annex C (informative) - Comparison of symbols used in
this standard with those used in BS EN 1992-1-1:2004
Describes requirements for sheets of factory-made machine-welded steel fabric for the reinforcement of concrete, manufactured from ribbed bars conforming to BS 4449:2005, or manufactured from wire conforming to BS 4482 for wrapping fabrics D49 and D98.
| Committee |
ISE/104
|
| DevelopmentNote |
To be used in conjunction with BS EN 10080 Supersedes 04/30109896 DC and BS 4483(1998) (10/2005) Reviewed and confirmed by BSI, October 2012. (09/2012)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This British Standard specifies requirements for sheets of factory-made machine-welded steel fabric for the reinforcement of concrete, manufactured from ribbed bars conforming to BS 4449:2005, or manufactured from wire conforming to BS 4482 for wrapping fabrics D49 and D98.
NOTE Where the term “bar” is used in this standard, it includes bar or decoiled product conforming to BS 4449:2005. For clarity only, it can also include wire conforming to BS 4482 for wrapping fabrics only.
| BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 5950-3.1(1990) : 1990 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 3: DESIGN IN COMPOSITE CONSTRUCTION - SECTION 3.1: CODE OF PRACTICE FOR DESIGN OF SIMPLE AND CONTINUOUS COMPOSITE BEAMS |
| BS 5911-5(2004) : 2004 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 5: SPECIFICATION FOR PRESTRESSED NON-PRESSURE PIPES AND FITTINGS WITH FLEXIBLE JOINTS |
| BS 449-2:1969 | Specification for the use of structural steel in building Metric units |
| BS 5385-3:2014 | Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice |
| BS 5385-3:2007 | Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice |
| BS 5385-5:2009 | Wall and floor tiling Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice |
| BS 5628-2:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| PD 6687-1:2010 | Background paper to the National Annexes to BS EN 1992-1 and BS EN 1992-3 |
| BS 8666:2005 | Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification |
| BS 7533-7:2010 | Pavements constructed with clay, natural stone or concrete pavers Code of practice for the construction of pavements of natural stone paving units and cobbles, and rigid construction with concrete block paving |
| PD 6687:2006 | Background paper to the UK National Annexes to BS EN 1992-1 |
| BS 5911-4(2002) : 2002 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 4: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE INSPECTION CHAMBERS |
| BS 5385-2:2015 | Wall and floor tiling Design and installation of external ceramic, natural stone and mosaic wall tiling in normal conditions. Code of practice |
| BS 8204-1(2003) : 2003 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 1: CONCRETE BASES AND CEMENTITIOUS LEVELLING SCREEDS TO RECEIVE FLOORINGS - CODE OF PRACTICE |
| BS 5834-4:2011 | Surface boxes, guards and underground chambers for the purposes of utilities Specification for utility chambers |
| BS 5911-3(2010) : 2010 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 3: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE MANHOLES AND SOAKAWAYS (COMPLEMENTARY TO BS EN 1917:2002) |
| BS 1722-1:2006 | Fences Specification for chain link fences |
| BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 1722-14:2006 | Fences Specification for open mesh steel panel fences |
| BS 8103-1:2011 | Structural design of low-rise buildings Code of practice for stability, site investigation, foundations, precast concrete floors and ground floor slabs for housing |
| BS 1722-2:2006 | Fences Specification for strained wire and wire mesh netting fences |
| BS 1722-5(2006) : 2006 | FENCES - PART 5: SPECIFICATION FOR CLOSE-BOARDED FENCES AND WOODEN PALISADE FENCES |
| BS PAS 68(2013) : 2013 | IMPACT TEST SPECIFICATIONS FOR VEHICLE SECURITY BARRIER SYSTEMS |
| BS 4482:2005 | Steel wire for the reinforcement of concrete products. Specification |
| BS 5950-1:2000 | Structural use of steelwork in building Code of practice for design. Rolled and welded sections |
| BS 8297:2017 | Design, manufacture and installation of architectural precast concrete cladding. Code of practice |
| BS 1722-11(2006) : 2006 | FENCES - PART 11: SPECIFICATION FOR PREFABRICATED WOOD PANEL FENCES |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| PD 8010-2:2015+A1:2016 | Pipeline systems Subsea pipelines. Code of practice |
| BS 8110-1:1997 | Structural use of concrete Code of practice for design and construction |
| BS 5385-2:2006 | Wall and floor tiling Design and installation of external ceramic and mosaic wall tiling in normal conditions. Code of practice |
| BS PAS 68(2010) : 2010 | IMPACT TEST SPECIFICATIONS FOR VEHICLE SECURITY BARRIERS |
| BS 8204-2(2003) : 2003 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 2: CONCRETE WEARING SURFACES - CODE OF PRACTICE |
| BS PD8010-2(2015) : 2015 | PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| BS 5400-7:1978 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 7: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, CONCRETE, REINFORCEMENT AND PRESTRESSING TENDONS |
| BS 8007:1987 | CODE OF PRACTICE FOR DESIGN OF CONCRETE STRUCTURES FOR RETAINING AQUEOUS LIQUIDS |
| BS EN ISO 15630-1:2010 | Steel for the reinforcement and prestressing of concrete. Test methods Reinforcing bars, wire rod and wire |
| BS 4449(2005) : 2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - BAR, COIL AND DECOILED PRODUCT - SPECIFICATION |
| BS EN ISO 15630-2:2010 | Steel for the reinforcement and prestressing of concrete. Test methods Welded fabric |
| BS 8666:2005 | Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.