BS 4190:1967
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Specification for ISO metric black hexagon bolts, screws and nuts
Hardcopy , PDF
02-15-2001
English
11-30-1967
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Cooperating organizations
Foreword
Specification
1. Scope
2. Finish
3. General dimensions
4. Length of bolts and screws
5. Ends of bolts and screws
6. Screw threads
7. Length of thread
8. Nuts: squareness of thread to face
9. Chamfering and facing
10. Diameter of shank of bolt
11. Drilled bolts and split pin holes
12. Strength grade designation system for steel bolts
and screws
13. Material and manufacture of steel bolts and screws
14. Mechanical properties of steel bolts and screws
15. Strength grade designation system for steel nuts
16. Material and manufacture of steel nuts
17. Mechanical properties of steel nuts
18. Marking and identification
19. Inspection and testing
20. Complete designation for the purpose of an enquiry
or order
Appendices
A. Testing of mechanical properties of steel bolts
and screws
B. Testing of mechanical properties of steel nuts
C. Sizes greater than 68 mm diameter
D. BSI policy statement on screw threads and the
metric system
E. Manufacturers' recommended range of sizes
Tables
1. Product categories
2. Tolerance on nominal length
3. Thread tolerance classes
4. Thread lengths
5. Thread runout (bolts) and underhead distance (screws)
6. Split pin holes
7. Strength grade designations for steel bolts and
screws
8. Strength grade designations for steel nuts
9. Recommended bolt and nut combinations
10. ISO metric black hexagon head bolts and screws
11. ISO metric hexagon head bolts and screws faced
under head or faced under head and turned on shank
12. ISO metric hexagon nuts and hexagon thin nuts
13. Standard nominal lengths and preferred sizes of
SI metric black hexagon bolts and screws
14. Mechanical properties of steel bolts and screws
15. Acceptance tests for steel bolts and screws
16. Mechanical properties of steel nuts
17. Chemical composition of steel nuts
18. Proof loads for steel bolts and screws
19. Proof loads for steel nuts
20. Dimensions for wedge loading test
21. Angle dimensions for head soundness test
22. Sizes greater than 68 mm diameter
Figures
1. Rounded end
2. Rolled thread end
3. Hexagon head bolt
4. Hexagon head screw
5. Head chamfering
6. Alternative types of normal thickness nut
7. Thin nut
8. Examples of marking of forged bolt or screw
9. Example of marking of bar turned bolt or screw
10. Example of marking of bar turned nut (optional)
11. Test piece
12. Application of proof load to full size bolt
13. Wedge loading of full size bolt
14. Head soundness test
15. Proof load test for nut
General dimensions and tolerances of bolts, screws and nuts with ISO metric threads to BS 3643 in diameters from 5 mm to 68 mm. For the convenience of users requiring larger sizes further information is provided in an appendix.
| Committee |
FME/9
|
| DevelopmentNote |
This standard has largely been superseded by a series of BS EN standards which have mechanical properties in accordance with BS EN 20898-1: 1992 and BS EN 20898-2: 1992 which are different to the mechanical properties in BS 4190: 1967. It is therefore rendered obsolescent but should remain available for the servicing of existing designs which are recognized to have a long working life.
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 14187-6:2004 | Identical |
| BS 5950-7:1992 | STRUCTURAL USE OF STEELWORK IN BUILDING - SPECIFICATION FOR MATERIALS AND WORKMANSHIP: COLD FORMED SECTIONS |
| BS MA 69:1976 | Specification. Ventilator heads |
| BS MA 40-2:1975 | Specification for marine guardrails, stanchions, etc Gates and portable guardrail sections for merchant ships (excluding passenger ships) |
| BS 6779-3:1994 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of combined metal and concrete construction |
| BS 7350:1990 | Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems |
| BS 463-2:1970 | Specification for sockets for wire ropes Metric units |
| BS 8103-3:1996 | Structural design of low-rise buildings Code of practice for timber floors and roofs for housing |
| BS 4211:1994 | Specification for ladders for permanent access to chimneys, other high structures, silos and bins |
| BS MA 21:1973 | Specification for deck-end roller fairleads |
| BS 1722-13:1978 | Fences Chain link fences for tennis court surrounds |
| BS MA 26:1973 | Specification for suction strainers |
| BS 7775:1995 | Specification for penstocks |
| BS 5824:1980 | Specification for low voltage switchgear and controlgear for industrial use. Mounting rails. C-profile and accessories for the mounting of equipment |
| BS MA 59:1974 | Specification for sea tubes |
| BS 8010-2.5:1989 | Code of practice for pipelines. Pipelines on land: design, construction and installation Glass reinforced thermosetting plastics |
| BS MA 42:1975 | Specification for ships\' awnings and supports |
| BS 2837:1988 | Specification for steel links and strap assemblies for lifting attachments for packing cases |
| BS 4076:1989 | Specification for steel chimneys |
| BS 3288-2:1990 | Insulator and conductor fittings for overhead power lines Specification for a range of fittings |
| BS 4463:1969 | Specification for crinkle washers for general engineering purposes. Metric series |
| BS 1722-4:1986 | Fences Specification for cleft chestnut pale fences |
| BS 3555:1988 | Specification for ring wrenches |
| PD 6430:1969 | The adoption of the metric system in the marine industry: report, basic programme and guide |
| BS 7794:1995 | Specification for square-drive sockets, driving squares and accessories for power-driven socket wrenches |
| BS MA 7:1983 | Specification for manholes with bolted covers |
| BS MA 23:1973 | Specification for multi-angle roller fairleads |
| BS 2558:Supplement No. 1:1968 | Metric sizes |
| BS MA 46:1973 | Specification for cast iron mudboxes |
| BS MA 41:1975 | Specification for two tonne general purpose davits |
| BS 6579-5:1986 | Safety fences and barriers for highways Specification for open box beam safety fence (single height) |
| BS 5834-2:1983 | Surface boxes, guards and underground chambers for gas and waterworks purposes Specification for small surface boxes |
| BS 7419:1991 | Specification for holding down bolts |
| BS MA 9:1970 | Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes |
| BS 1564:1975 | Specification for pressed steel sectional rectangular tanks |
| BS MA 40-1:1975 | Specification for marine guardrails, stanchions, etc Guardrails for merchant ships (excluding passenger ships) |
| BS 7818:1995 | Specification for pedestrian restraint systems in metal |
| BS 6579-6:1988 | Safety fences and barriers for highways Specification for components for open box beam safety fence (double height) |
| BS 7774:1994 | Threaded fasteners. Axial load fatigue testing. Test methods and evaluation of results |
| BS 6579-7:1989 | Safety fences and barriers for highways Specification for components for untensioned corrugated beam safety fence |
| BS MA 37:1973 | Specification for external doors (wood) for ships |
| BS 7333:1990 | Specification for slewing jib cranes |
| BS EN 20898-2:1994 | Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
| BS 853(1990) : 1990 AMD 8979 | SPECIFICATION FOR VESSELS FOR USE IN HEATING SYSTEMS - CALORIFIERS AND STORAGE VESSELS FOR CENTRAL HEATING AND HOT WATER SUPPLY |
| EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
| BS 853-1(1996) : 1996 | SPECIFICATION FOR VESSELS FOR USE IN HEATING SYSTEMS - CALORIFIERS AND STORAGE VESSELS FOR CENTRAL HEATING AND HOT WATER SUPPLY |
| BS 7608:1993 | Code of practice for fatigue design and assessment of steel structures |
| BS 5834-3:1985 | Surface boxes, guards and underground chambers for gas and waterworks purposes Specification for large surface boxes |
| BS 8010-2.1:1987 | Code of practice for pipelines. Pipelines on land: design, construction and installation Ductile iron |
| BS 4464:1969 | Specification for spring washers for general engineering and automobile purposes. Metric series |
| BS 8006:1995 | Code of practice for strengthened/reinforced soils and other fills |
| BS MA 17:1972 | Specification for derrick boom clamp |
| BS 4320:1968 | Specification for metal washers for general engineering purposes. Metric series |
| BS 6579-4:1990 | Safety fences and barriers for highways Specification for components for tensioned rectangular hollow section beam (200 mm x 100 mm) safety fence |
| BS 759-1:1984 | Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers Specification for valves, mountings and fittings |
| BS 1722-10:1999 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 5400-6:1999 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL |
| BS 3643-1:1981 | ISO metric screw threads Principles and basic data |
| BS 4500-1:1969 | ISO limits and fits General, tolerances and deviations |
| BS 891-1:1962 | Method for Rockwell hardness test Testing of metals |
| BS 427-1:1961 | Method for Vickers hardness test Testing of metals |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.