BS 1449-1.1:1991
Current
The latest, up-to-date edition.
Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip General specification
Hardcopy , PDF
English
10-31-1991
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Committees responsible
Foreword
Specification
0 Introduction
1. Scope
2. Definitions
3. General
4. Steelmaking process
5. Chemical composition
6. Freedom from defects
7. Condition of material on delivery
8. Number of tests
9. Tensile properties
10. Bending
11. Strain-age-embrittlement
12. Stabilization
13. Formability
14. Hardness
15. Decarburization test
16. Retests
17. Surface finish and surface inspection
18. Edge conditions
19. Inspection
21. Marking
Appendices
A. Product analysis and permitted variations
B. Methods of test
C. Determination of r values
Tables
1. Symbols for material conditions
2. Symbols for surface finishes and surface inspection
3. Summary of material grades, chemical compositions
and types of steel available
4. Edge conditions
5. Permitted variations of product analysis from
specified range. Applicable to killed (K) steels
only
Figures
1. Bend test with the axis of the bend parallel to the
direction of rolling
2. Bend test with the axis of the bend at 90 deg to
the direction of rolling
3. Nomogram for determination of r values
Gives general requirements for flat rolled carbon steel products, available in the hot or cold rolled conditions and in coil or cut length form, rolled as wide strip in widths less than 600 mm. Covers plate, sheet and strip in thicknesses up to 16 mm and the material grades, chemical compositions and types of steel. Covers steelmaking process, condition of material on delivery, tensile properties, strain age embrittlement, stabilization, formability, hardness and decarburization test.
| Committee |
ISE/109
|
| DevelopmentNote |
Together with BS 1449-1.2(1991), BS 1449-1.3(1991), BS 1449-1.4(1991), BS 1449-1.5(1991), BS 1449-1.6(1991), BS 1449-1.7(1991), BS 1449-1.8(1991), BS 1449-1.9(1991), BS 1449-1.10(1991), BS 1449-1.11(1991), BS 1449-1.12(1991), BS 1449-1.13(1991), BS 1449-1.14(1991), BS 1449-1.15(1991), and BS EN 10130 it supersedes BS 1449-1(1983). (05/2006) Reviewed and confirmed by BSI, January 2010. (12/2009)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This Section of BS1449 specifies general requirements for flat rolled carbon steel products, available in the hot or cold rolled conditions and in coil or cut length form, rolled as wide strip in nominal widths of 600mm and wider or as narrow strip in nominal widths less than 600mm, as specified in BS1449‑1.2 to BS1449‑1.15.
This Section of BS1449 covers plate, sheet and strip in nominal thicknesses up to and including 16mm and the material grades, chemical compositions and types of steel summarized in Table3.
NOTE The titles of the publications referred to in this standard are listed on page 16.
| BS 1449-1.5(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - PART 1: CARBON AND CARBON-MANGANESE PLATE, SHEET AND STRIP - SECTION 1.5: SPECIFICATION FOR COLD ROLLED WIDE MATERIAL BASED ON SPECIFIED MINIMUM STRENGTH |
| DEFSTAN 81-121/3(2004) : 2004 | RECONDITIONING OF AIRBORNE HIGH PRESSURE SEAMLESS STEEL GAS CONTAINERS |
| 15/30270868 DC : DRAFT FEB 2015 | BS 6635 - MANUFACTURE OF SADDLE TREES MADE FROM WOOD - SPECIFICATION |
| BS 1449-1.4(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR HOT ROLLED WIDE MATERIAL BASED ON MINIMUM STRENGTH |
| BS 7191:1989 | Specification for weldable structural steels for fixed offshore structures |
| DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| BS 1449-1.2(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR HOT ROLLED STEEL PLATE, SHEET AND WIDE STRIP BASED ON FORMABILITY |
| BS 1449-1.10(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR HOT ROLLED NARROW STRIP BASED ON SPECIFIED MINIMUM STRENGTH |
| BS 6635:2015 | Manufacture of saddle trees made from wood. Specification |
| BS 1722-12:1999 | Fences Specification for steel palisade fences |
| BS 1449-1.8:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip Specification for hot rolled narrow strip based on formability |
| DEFSTAN 02-128/2(2008) : 2008 | FURNITURE AND ASSOCIATED EQUIPMENT REQUIREMENTS FOR HM SHIPS |
| BS 1449-1.11(1991) : 1991 | STEEL PLATE, SHEET AND STIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR COLD ROLLED NARROW |
| DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| BS PD5500(2015) : 2015 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 1140:1993 | Specification for resistance spot welding of uncoated and coated low carbon steel |
| BS 5950-5:1998 | Structural use of steelwork in building Code of practice for design of cold formed thin gauge sections |
| BS 3159-2:1993 | Woodworking saws for hand use Specification for tenon and dovetail saws |
| BS 3761:1995 | Specification for solvent-based paint remover |
| BS 4592-1:2006 | Industrial type flooring and stair treads Metal open bar gratings. Specification |
| BS PD5500(2018) : 2018 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 1501-1:1980 | Steels for pressure purposes Specification for carbon and carbon manganese steels: plates |
| BS 2559:1994 | Specification for screwdrivers and screwdriver accessories |
| BS 6779-1:1992 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction |
| DEFSTAN 81-086/4(2017) : 2017 | FITTINGS METAL AND HANDLES FOR CONTAINERS |
| DEFSTAN 80-34/3(1995) : 1995 | CORROSION PREVENTIVE, OIL, THIN FILM JOINT SERVICE DESIGNATION: PX-4 |
| BS 1449-1.14:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes |
| DEFSTAN 81-93/3(2005) : 2005 | PAPER, WRAPPING GREASE-RESISTING |
| BS 1449-1.15:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip Specification for cold rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes |
| DEFSTAN 91-112/1(1997) : 1997 | LUBRICATING OIL, GEAR, AIRCRAFT, LIGHT, NATO CODE: 0-153, JOINT SERVICE DESIGNATION: OEP-30 & LUBRICATING OIL, GEAR, AIRCRAFT, MEDIUM, NATO CODE: 0-155, JOINT SERVICE DESIGNATION: OEP-70 |
| DEFSTAN 02-860(PT1)/1(2003) : 2003 | REQUIREMENTS FOR THE DESIGN AND MANUFACTURE OF PORTABLE FIRE EXTINGUISHERS - PART 1: SHOCK SUPPORT BRACKETS |
| DEFSTAN 81-29/4(2007) : 2007 | HANDLES, WEBBING OR ROPE, WITH METAL BRACKETS OR WOOD BLOCKS FOR USE ON CONTAINERS |
| DEFSTAN 02-703/2(2011) : 2011 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| BS 1449-1.6(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR TOLERANCES ON DIMENSIONS AND SHAPE FOR HOT ROLLED WIDE MATERIAL |
| BS 1449-1.3(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR HOT ROLLED STEEL PLATE, SHEET AND WIDE STRIP FOR VITREOUS ENAMELLING BASED ON FORMABILITY |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| BS 1449-1.9(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR COLD ROLLED NARROW STRIP BASED ON FORMABILITY |
| DEFSTAN 81-29/5(2014) : 2014 | HANDLES, WEBBING OR ROPE, WITH METAL BRACKETS OR WOOD BLOCKS FOR USE ON CONTAINERS |
| DEFSTAN 81-093/5(2017) : 2017 | GREASE RESISTING MATERIALS FOR GENERAL PACKAGING |
| BS 1449-1.13(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR TOLERANCES ON DIMENSIONS AND SHAPE FOR COLD ROLLED NARROW STRIP |
| BS 1449-1.12(1991) : 1991 | STEEL PLATES, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR TOLERANCES ON DIMENSIONS AND SHAPE FOR HOT ROLLED NARROW STRIP |
| BS 7349-1:1993 | Blind rivets with break mandrel Specification for closed end blind rivets |
| BS 1449-1.7(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR TOLERANCES ON DIMENSIONS AND SHAPE FOR COLD ROLLED WIDE MATERIAL |
| BS 7670-2:1997 | Steel nuts and bolts for resistance projection welding Specification for welding of weld nuts and weld bolts |
| I.C.P. 2:2002 | SLATING AND TILING |
| BS 240:1986 | Method for Brinell hardness test and for verification of Brinell hardness testing machines |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| BS 1449-1.4(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR HOT ROLLED WIDE MATERIAL BASED ON MINIMUM STRENGTH |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| BS 1449-1.2(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR HOT ROLLED STEEL PLATE, SHEET AND WIDE STRIP BASED ON FORMABILITY |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EURONORM 48 : 1984 | HOT-ROLLED STRIP STEEL; PERMISSIBLE DEVIATIONS IN DIMENSIONS AND FORM |
| BS 3855:1965 | Method for modified Erichsen cupping test for sheet and strip metal |
| BS 1449-1.12(1991) : 1991 | STEEL PLATES, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR TOLERANCES ON DIMENSIONS AND SHAPE FOR HOT ROLLED NARROW STRIP |
| BS 1449-1.8:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip Specification for hot rolled narrow strip based on formability |
| EURONORM 149 : 1980 | FLAT PRODUCTS OF STEELS WITH A HIGH YIELD STRENGTH FOR COLD WORKING, WIDE FLATS, SHEETS AND STRIP |
| EN 10131:2006 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
| EURONORM 140 : 1981 | STEEL COLD STRIP WITHOUT COATING IN ROLLED WIDTHS WITH LESS THAN 600mm; PERMISSIBLE DEVIATIONS FOR DIMENSION, FORM AND WEIGHT |
| BS 1449-1.5(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - PART 1: CARBON AND CARBON-MANGANESE PLATE, SHEET AND STRIP - SECTION 1.5: SPECIFICATION FOR COLD ROLLED WIDE MATERIAL BASED ON SPECIFIED MINIMUM STRENGTH |
| BS 1837:1970 | Methods for the sampling of iron, steel, permanent magnet alloys and ferro-alloys |
| BS 1449-1.14:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes |
| BS 6617-1:1985 | Determination of decarburization in steel Methods for determining decarburization by microscopic and micro-hardness techniques |
| BS 1449-1.13(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR TOLERANCES ON DIMENSIONS AND SHAPE FOR COLD ROLLED NARROW STRIP |
| BS 1449-1.3(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR HOT ROLLED STEEL PLATE, SHEET AND WIDE STRIP FOR VITREOUS ENAMELLING BASED ON FORMABILITY |
| BS 1449-1.6(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR TOLERANCES ON DIMENSIONS AND SHAPE FOR HOT ROLLED WIDE MATERIAL |
| EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| BS 1449-1.15:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip Specification for cold rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes |
| BS 1449-1.9(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR COLD ROLLED NARROW STRIP BASED ON FORMABILITY |
| EURONORM 111 : 1977 | CONTINUOUSLY HOT ROLLED NON-COATED MILD UNALLOYED STEEL SHEET AND STRIP FOR COLD-FORMING - QUALITY STANDARD |
| EURONORM 139 : 1981 | FOLD STRIP WITHOUT COATING IN ROLLED WIDTHS WITH LESS THAN 600mm OF UNALLOYED LOW CARBON STEELS FOR COLD WORKING; QUALITY STANDARD |
| BS 1449-1.10(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR HOT ROLLED NARROW STRIP BASED ON SPECIFIED MINIMUM STRENGTH |
| BS 427:1990 | Method for Vickers hardness test and for verification of Vickers hardness testing machines |
| BS 1449-1.11(1991) : 1991 | STEEL PLATE, SHEET AND STIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR COLD ROLLED NARROW |
| BS 1449-1.7(1991) : 1991 | STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR TOLERANCES ON DIMENSIONS AND SHAPE FOR COLD ROLLED WIDE MATERIAL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.