BS 123400-003:2001
Current
The latest, up-to-date edition.
System of quality assessment. Capability detail specification. Flexible single-sided and double-sided printed boards without through-connections
Hardcopy , PDF
English
12-17-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Capability qualifying component
5 Range of capability approval
6 Capability test program
7 Additional test capability
8 Traceability
Annex A (normative) Test pattern for marking inks
Annex B (normative) Test pattern for solder masks
Annex C (normative) Assembly of test pattern for
rigidizers or stiffeners
Annex D (normative) Use of ANSI/IPC A-600F
Annex E (normative) test method for solder resistance
of organic coatings
Bibliography
Describes the capability qualifying component, its characteristics to be tested, the test methods and conditions to be applied and the requirements to be fulfilled for testing basic and additional capability, in relation to flexible single-sided and double-sided printed boards without through-connections.
| Committee |
EPL/501
|
| DevelopmentNote |
To be read in conjunction with BS 123000(2001) and BS 123400(2001). Supersedes 01/204159 DC. (01/2002)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This British Standard specifies the capability qualifying component, its characteristics to be tested, the test methods and conditions to be applied and the requirements to be fulfilled for testing basic and additional capability, in relation to flexible single-sided and double-sided printed boards without through-connections. It is applicable for flexible single-sided and double-sided printed boards without through-connections made with the materials and surface finishes specified in clause 4.
This British Standard is a capability detail specification intended for use with the IECQ system of quality assessment for electronic components.
| BS 123400:2001 | System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards without through-connections |
| BS EN ISO 3543:2001 | Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method |
| BS EN 60249-2-14:1994 | Specifications Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality |
| BS EN 60249-2-7:1994 | Specifications Specification No.7. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| BS 123000:2001 | System of quality assessment. Generic specification. Printed boards |
| IEC 60249-2-1:1985 | Base materials for printed circuits. Part 2: Specifications. Specification No. 1: Phenolic cellulose paper copper-clad laminated sheet, high electrical quality |
| BS EN 60249-2-13:1994 | Base material for printed circuits. Specifications Flexible copper-clad polyimide film, general purpose grade |
| BS EN 60249-2-2:1994 | Specifications Specification for phenolic cellulose paper copper-clad laminated sheet, economic quality |
| IEC 60249-2-8:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 8: Flexible copper-clad polyester (PETP) film |
| IEC 60249-2-2:1985 | Base materials for printed circuits. Part 2: Specifications. Specification No. 2: Phenolic cellulose paper copper-clad laminated sheet, economic quality |
| BS EN 60249-2-6:1994 | Specifications Specification No.6. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test) |
| IEC 60249-2-4:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade |
| IEC 60249-2-5:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 5: Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) |
| IEC 60249-2-14:1988 | Base materials for printed circuits. Part 2: Specifications. Specification No. 14: Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality |
| BS EN 60249-2-4:1994 | Specifications Specification for epoxide woven glass fabric copper-clad laminated sheet, general purpose grade - Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade |
| BS EN 60068-2-1:2007 | Environmental testing Tests. Test A. Cold |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| BS 6221-2:1991 | Printed wiring boards Methods of test |
| IEC 60068-2-54:2006 | Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method |
| BS EN 60249-2-15:1994 | Specifications Flexible copper-clad polyimide film, of defined flammability |
| BS EN 60249-2-8:1995 | Specifications Specification for flexible copper-clad polyester (PETP) film |
| BS 123400:2001 | System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards without through-connections |
| BS EN 123000:1992 | Harmonized system of quality assessment for electronic components. Generic specification: printed boards |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60249-2-3:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
| IEC 60249-2-15:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 15: Flexible copper-clad polyimide film, of defined flammability |
| BS EN ISO 1463:2004 | Metallic and oxide coatings. Measurement of coating thickness. Microscopical method |
| BS 4727-1:GRP11(1991) : 1991 | GLOSSARY OF ELECTROTECHNICAL, POWER, TELECOMMUNICATION, ELECTRONICS, LIGHTING AND COLOUR TERMS - TERMS COMMON TO POWER, TELECOMMUNICATIONS AND ELECTRONICS - PRINTED CIRCUITS |
| IEC 60249-2-13:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 13: Flexible copper-clad polyimide film, general purpose grade |
| BS EN 60249-2-3:1994 | Specifications Metal-clad base materials for printed wiring boards. Copper-clad base material. Specification for epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) |
| BS EN 60068-2-2:2007 | Environmental testing Tests. Test B. Dry heat |
| IEC 60249-2-6:1985 | Base materials for printed circuits. Part 2: Specifications. Specification No. 6: Phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test) |
| IEC 60249-2-7:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 7: Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) |
| BS EN 60249-2-5:1994 | Specifications Specification No 5. Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) |
| BS 2011-2.1T:1981 | Environmental testing. Tests Test T. Soldering |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.