BIS IS 800 : 2007 AMD 1 2012
Current
Current
The latest, up-to-date edition.
GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
Published date
01-12-2013
Publisher
Sorry this product is not available in your region.
FOREWORD
SECTION 1 - GENERAL
SECTION 2 - MATERIALS
SECTION 3 - GENERAL DESIGN MATERIALS
SECTION 4 - METHODS OF STRUCTURAL ANALYSIS
SECTION 5 - LIMIT STATE DESIGN
SECTION 6 - DESIGN OF TENSION MEMBERS
SECTION 7 - DESIGN OF COMPRESSION MEMBERS
SECTION 8 - DESIGN OF MEMBERS SUBJECTED TO BENDING
SECTION 9 - MEMBERS SUBJECTED TO COMBINED FORCES
SECTION 10 - CONNECTIONS
SECTION 11 - WORKING STRESS DESIGN
SECTION 12 - DESIGN AND DETAILING FOR EARTHQUAKE
LOADS
SECTION 13 - FATIGUE
SECTION 14 - DESIGN ASSISTED BY TESTING
SECTION 15 - DURABILITY
SECTION 16 - FIRE RESISTANCE
SECTION 17 - FABRICATION AND ERECTION
ANNEX A - LIST OF REFERRED INDIAN STANDARDS
ANNEX B - ANALYSIS AND DESIGN METHODS
ANNEX C - DESIGN AGAINST FLOOR VIBRATION
ANNEX D - DETERMINATION OF EFFECTIVE LENGTH OF COLUMNS
ANNEX E - ELASTIC LATERAL TORSIONAL BUCKLING
ANNEX F - CONNECTIONS
ANNEX G - GENERAL RECOMMENDATIONS FOR STEELWORK TENDERS
ANNEX H - PLASTIC PROPERTIES OF BEAMS
ANNEX J - COMMITTEE COMPOSITION
Pertains to general construction using hot rolled steel sections joined using riveting, bolting and welding.
| Committee |
CED 7
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| BIS IS 802-1-2 : 1992(R2003) | USE OF STRUCTURAL STEEL IN OVERHEAD TRANSMISSION LINE TOWERS - CODE OF PRACTICE - PART 1: MATERIAL, LOADS AND PERMISSIBLE STRESSES - SECTION 2: PERMISSIBLE STRESSES |
| BIS IS 16144 : 2014 | FOODGRAIN STORAGE GODOWNS - CODE OF PRACTICE |
| BIS IS 11388 : 2012(R2017) | RECOMMENDATIONS FOR DESIGN OF TRASH RACKS FOR INTAKES |
| BIS IS 1893-1 : 2016 | CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES - PART 1: GENERAL PROVISIONS AND BUILDINGS |
| BIS IS 1893-4 : 2015 | CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES - PART 4: INDUSTRIAL STRUCTURES INCLUDING STACK-LIKE STRUCTURES |
| BIS IS 807 : 2006 | DESIGN, ERECTION AND TESTING (STRUCTURAL PORTION) OF CANES AND HOISTS - CODE OF PRACTICE |
| BIS IS 15498 : 2004(R2009) | GUIDELINES FOR IMPROVING THE CYCLONIC RESISTANCE OF LOW RISE HOUSES AND OTHER BUILDINGS/STRUCTURES |
| BIS IS 6533-2 : 1989(R2003) | CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF STEEL CHIMNEY - PART 2: STRUCTURAL ASPECT |
| BIS IS 1367-18 : 1996(R2006) | INDUSTRIAL FASTENERS - THREADED STEEL FASTENERS - TECHNICAL SUPPLY CONDITIONS - PART 18: PACKAGING |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| BIS IS 2155 : 1982(R2001) | SPECIFICATION FOR COLD FORGED SOLID STEEL RIVETS FOR HOT CLOSING (6 TO 16 MM DIAMETER) |
| BIS IS 7307-1 : 1974(R2003) | APPROVAL TESTS FOR WELDING PROCEDURES - PART 1: FUSION WELDING FOR STEEL |
| BIS IS 1261 : 1959 AMD 1 | CODE OF PRACTICE FOR SEAM WELDING IN MILD STEEL |
| BIS IS 919-1 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCE, DEVIATION AND FITS |
| BIS IS 1477-1 : 1971(R2005) | CODE OF PRACTICE FOR PAINTING OF FERROUS METALS IN BUILDINGS - PART 1: PRETREATMENT |
| BIS IS 12843 : 1989(R2010) | TOLERANCES FOR ERECTION OF STEEL STRUCTURES |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| BIS IS 816 : 1969(R1998) | CODE OF PRACTICE FOR USE OF METAL ARC WELDING FOR GENERAL CONSTRUCTION IN MILD STEEL |
| ISO 898-7:1992 | Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| BIS IS 1643 : 2013 | FIRE SAFETY OF BUILDINGS (GENERAL): EXPOSURE HAZARD - CODE OF PRACTICE |
| BIS IS 1367-9-2 : 1993(R2003) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 9: SURFACE DISCONTINUITIES - SECTION 2: BOLTS, SCREWS AND STUDS FOR SPECIAL APPLICATIONS |
| BIS IS 6240 : 2008 | HOT ROLLED STEEL PLATE (UP TO 6 MM) SHEET AND STRIP FOR THE MANUFACTURE OF LOW PRESSURE LIQUEFIABLE GAS CYLINDERS |
| BIS IS 4326 : 2013 | EARTHQUAKE RESISTANT DESIGN AND CONSTRUCTION OF BUILDINGS - CODE OF PRACTICE |
| BIS IS 1893-1 : 2016 | CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES - PART 1: GENERAL PROVISIONS AND BUILDINGS |
| BIS IS 1990 : 2009 | STEEL RIVET AND STAY BARS FOR BOILERS |
| BIS IS 5374 : 1975(R2001) | TAPER WASHERS FOR I-BEAMS (ISMB) |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| BIS IS 4000 : 1992(R2003) | HIGH STRENGTH BOLTS IN STEEL STRUCTURES - CODE OF PRACTICE |
| BIS IS 7310-1 : 1974(R2006) | APPROVAL TESTS FOR WELDERS WORKING TO APPROVED WELDING PROCEDURES - PART 1: FUSION WELDING OF STEEL |
| BIS IS 3757 : 1985(R2003) | SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| ISO 8991:1986 | Designation system for fasteners |
| ISO 2692:2014 | Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| ISO 6157-3:1988 | Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements |
| BIS IS 1079 : 2017 | HOT ROLLED CARBON STEEL SHEET, PLATE AND STRIP - SPECIFICATION |
| BIS IS 875-4 : 1987(R2003) | CODE OF PRACTICE FOR DESIGN LOADS (OTHER THAN EARTHQUAKE) FOR BUILDINGS AND STRUCTURES - PART 4: SNOW LOADS |
| ISO 4016:2011 | Hexagon head bolts Product grade C |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
| IS 875-1 : 1987(R2008) | CODE OF PRACTICE FOR DESIGN LOADS (OTHER THAN EARTHQUAKE) FOR BUILDINGS AND STRUCTURES - PART 1: DEAD LOADS - UNIT WEIGHTS OF BUILDING MATERIALS AND STORED MATERIALS |
| BIS IS 801 : 1975(R2001) | CODE OF PRACTICE FOR USE OF COLD FORMED LIGHT GAUGE STEEL STRUCTURAL MEMBERS IN GENERAL BUILDING CONSTRUCTION |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| BIS IS 1024 : 1999(R2005) | CODE OF PRACTICE FOR USE OF WELDING IN BRIDGES AND STRUCTURES SUBJECT TO DYNAMIC LOADING |
| BIS IS 2708 : 1993(R2002) | 1.5 PERCENT MANGANESE STEEL CASTINGS FOR GENERAL ENGINEERING PURPOSES |
| ISO 2320:2015 | Fasteners Prevailing torque steel nuts Functional properties |
| BIS IS 875-2 : 1987(R2008) | CODE OF PRACTICE FOR DESIGN LOADS (OTHER THAN EARTHQUAKE) FOR BUILDINGS AND STRUCTURES - PART 2: IMPOSED LOADS |
| BIS IS 8000-3 : 1992(R2003) | TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - PART 3: DIMENSIONING AND TOLERANCING OF PROFILES |
| BIS IS 10748 : 2004(R2014) | HOT-ROLLED STEEL STRIP FOR WELDED TUBES AND PIPES - SPECIFICATION |
| BIS IS 9595 : 1996(R2003) | METAL-ARC WELDING OF CARBON AND CARBON MANGANESE STEELS - RECOMMENDATIONS |
| BIS IS 5624 : 1993(R2008) | FOUNDATION BOLTS - SPECIFICATION |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| BIS IS 1030 : 1998 | CARBON STEEL CASTINGS FOR GENERAL ENGINEERING PURPOSES - SPECIFICATION |
| BIS IS 808 : 1989(R2014) | DIMENSIONS FOR HOT ROLLED STEEL BEAM, COLUMN, CHANNEL AND ANGEL SECTIONS |
| BIS IS 1367-5 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 5: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - SET SCREWS AND SIMILAR THREADED FASTENERS NOT UNDER TENSILE STRESSES |
| BIS IS 1364-3 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 3: HEXAGON NUTS, STYLE 1 (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 1852 : 1985(R2013) | SPECIFICATION FOR ROLLING AND CUTTING TOLERANCES FOR HOT-ROLLED STEEL PRODUCTS |
| BIS IS 1367-9-1 : 1993(R2003) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 9: SURFACE DISCONTINUITIES - SECTION 1: BOLTS, SCREWS AND STUDS FOR GENERAL APPLICATIONS |
| BIS IS 1367-20 : 1996(R2001) | INDUSTRIAL FASTENERS - THREADED STEEL FASTENERS - TECHNICAL SUPPLY CONDITIONS - MECHANICAL PROPERTIES - PART 20: TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS OF 1 MM TO 10 MM |
| BIS IS 814 : 2004(R2010) | COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CARBON AND CARBON MANGANESE STEEL - SPECIFICATION |
| BIS IS 5372 : 1975(R2001) | TAPER WASHERS FOR CHANNELS (ISMC) |
| ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
| BIS IS 6639 : 2005 | HEXAGON HEAD BOLTS FOR GENERAL STEEL STRUCTURES - SPECIFICATION |
| BIS IS 1929 : 1982 AMD 4 2014 | SPECIFICATION FOR HOT FORGED STEEL RIVETS FOR HOT CLOSING (12 TO 36 MM DIAMETER) |
| BIS IS 1875 : 1992(R2014) | CARBON STEEL BILLETS, BLOOMS, SLABS AND BARS FOR FORGINGS |
| BIS IS 1363-2 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 2: HEXAGON HEAD SCREWS (SIZE RANGE M 5 TO M 64) |
| BIS IS 1367-14-1 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 14: MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - SECTION 1: BOLTS, SCREWS AND STUDS |
| BIS IS 1367-2 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 2: TOLERANCES FOR FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
| BIS IS 3613 : 1974(R2006) | ACCEPTANCE TESTS FOR WIRE FLUX COMBINATION FOR SUBMERGED ARC WELDING |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| BIS IS 1364-4 : 2003 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 4: HEXAGON THIN NUTS (CHAMFERED) (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 813 : 1986(R2003) | SCHEME OF SYMBOLS FOR WELDING |
| BIS IS 1395 : 1982(R2008) | SPECIFICATION FOR LOW AND MEDIUM ALLOY STEEL COVERED ELECTRODES FOR MANUAL METAL ARC WELDING |
| BIS IS 1148 : 2009 | STEEL RIVET BARS (MEDIUM AND HIGH TENSILE) FOR STRUCTURAL PURPOSES |
| BIS IS 1367-12 : 1981(R2003) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 12: PHOSPHATE COATINGS ON THREADED FASTENERS |
| BIS IS 9172 : 1979(R2015) | RECOMMENDED DESIGN PRACTICE FOR CORROSION PREVENTION OF STEEL STRUCTURES |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
| BIS IS 1641 : 2013 | FIRE SAFETY OF BUILDINGS (GENERAL): GENERAL PRINCIPLES OF FIRE GRADING AND CLASSIFICATION - CODE OF PRACTICE |
| BIS IS 2002 : 2009 AMD 1 2012 | STEEL PLATE FOR PRESSURE VESSEL FOR INTERMEDIATE AND HIGH TEMPERATURE SERVICE INCLUDING BOILERS |
| BIS IS 9077 : 1979(R2002) | CODE OF PRACTICE FOR CORROSION PROTECTION OF STEEL REINFORCEMENT IN RB AND RCC CONSTRUCTION |
| BIS IS 1367-13 : 1983(R2001) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 13: HOT-DIP GALVANIZED COATINGS ON THREADED FASTENERS |
| BIS IS 513 : 2008 AMD 2 2016 | COLD REDUCED LOW CARBON STEEL SHEET AND STRIP |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| BIS IS 456 : 2000(R2016) | PLAIN AND REINFORCED CONCRETE CODE - OF PRACTICE |
| BIS IS 6649 : 1985(R2010) | SPECIFICATION FOR HARDENED AND TEMPERED WASHERS FOR HIGH STRENGTH STRUCTURAL BOLTS AND NUTS |
| BIS IS 1364-2 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 2: HEXAGON HEAD SCREWS (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 1642 : 2013 | FIRE SAFETY OF BUILDINGS (GENERAL): DETAILS OF CONSTRUCTION - CODE OF PRACTICE |
| BIS IS 1364-1 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 8000-4 : 1976(R2005) | GEOMETRICAL TOLERANCING ON TECHNICAL DRAWINGS - PART 4: PRACTICAL EXAMPLES OF INDICATIONS ON DRAWINGS |
| BIS IS 1363-1 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64) |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) Product grade B |
| BIS IS 6419 : 1996 AMD 1 2008 | WELDING RODS AND BARE ELECTRODES FOR GAS SHIELDED ARC WELDING OF STRUCTURAL STEELS - SPECIFICATION |
| BIS IS 5369 : 1975(R2001) | GENERAL REQUIREMENTS FOR PLAIN WASHERS AND LOCK WASHERS |
| ISO 3800:1993 | Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results |
| BIS IS 1149 : 1982(R2004) | HIGH TENSILE STEEL RIVET BARS FOR STRUCTURAL PURPOSES |
| BIS IS 7205 : 1974(R2005) | SAFETY CODE FOR ERECTION OF STRUCTURAL STEELWORK |
| BIS IS 8976 : 1978(R2017) | GUIDE FOR PREPARATION AND ARRANGEMENT OF SETS OF DRAWINGS AND PARTS LISTS |
| BIS IS 1367-14-3 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 14: MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - SECTION 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| BIS IS 1367-17 : 2005 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 17: INSPECTION, SAMPLING AND ACCEPTANCE PROCEDURE |
| BIS IS 6623 : 2004 | HIGH STRENGTH STRUCTURAL NUTS - SPECIFICATION |
| BIS IS 1367-14-2 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 14: MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - SECTION 2: NUTS |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| BIS IS 1278 : 1972(R2008) | SPECIFICATION FOR FILLER RODS FOR GAS WELDING |
| BIS IS 875-5 : 1987(R2008) | CODE OF PRACTICE FOR DESIGN LOADS (OTHER THAN EARTHQUAKE) FOR BUILDINGS AND STRUCTURES - PART 5: SPECIAL LOADS AND COMBINATIONS |
| BIS IS 817-1 : 1992(R2003) | TRAINING OF WELDERS - CODE OF PRACTICE - PART 1: MANUAL METAL ARC WELDING |
| BIS IS 7318-1 : 1974(R2003) | APPROVAL TEST FOR WELDERS WHEN WELDING PROCEDURE APPROVAL IS NOT REQUIRED - PART 1: FUSION WELDING OF STEEL |
| BIS IS 817-2 : 1996(R2003) | TRAINING OF WELDERS - CODE OF PRACTICE - PART 2: OXYFUEL WELDING |
| BIS IS 1608 : 2005 | METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| BIS IS 819 : 1957 AMD 1 2009 | CODE OF PRACTICE FOR RESISTANCE SPOT WELDING FOR LIGHT ASSEMBLIES IN MILD STEEL |
| ISO 6157-2:1995 | Fasteners Surface discontinuities Part 2: Nuts |
| BIS IS 1477-2 : 1971(R2005) | CODE OF PRACTICE FOR PAINTING OF FERROUS METALS IN BUILDINGS - PART 2: PAINTING |
| BIS SP 6-(1) : 1964 | STRUCTURAL STEEL SECTIONS |
| BIS IS 1367-19 : 1997(R2002) | INDUSTRIAL FASTENERS - THREADED STEEL FASTENERS - TECHNICAL SUPPLY CONDITIONS - PART 19: AXIAL LOAD FATIGUE TESTING OF BOLTS, SCREWS AND STUDS |
| BIS IS 919-2 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATION FOR HOLES SHAFTS |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| BIS IS 1387 : 1993(R2003) | GENERAL REQUIREMENTS FOR THE SUPPLY OF METALLURGICAL MATERIALS |
| BIS IS 7557 : 1982(R2001) | STEEL WIRE: UARTTO 20 MM FOR THE MANUFACTURE OF COLD FORGED RIVETS |
| BIS IS 1367-7 : 1980(R2003) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 7: MECHANICAL PROPERTIES AND TEST METHODS FOR NUTS WITHOUT SPECIFIED PROOF LOADS |
| BIS IS 1367-10 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 10: SURFACE DISCONTINUITIES - NUTS |
| BIS IS 8000-1 : 1985(R2005) | GEOMETRICAL TOLERANCING ON TECHNICAL DRAWINGS - PART 1: TOLERANCES OF FORM ORIENTATION, LOCATION AND RUN-OUT AND APPROPRIATE GEOMETRICAL DEFINITIONS |
| BIS IS 1367-6 : 1994(R2015) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 6: MECHANICAL PROPERTIES AND TEST METHODS FOR NUTS WITH SPECIFIED PROOF LOADS |
| BIS IS 1363-3 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 3: HEXAGON NUTS (SIZE RANGE M 5 TO M 64) |
| BIS IS 962 : 1989(R2017) | CODE OF PRACTICE FOR ARCHITECTURAL AND BUILDING DRAWINGS |
| BIS IS 8000-2 : 1992(R2003) | TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - PART 2: MAXIMUM MATERIAL PRINCIPLES |
| BIS IS 5370 : 1969(R2001) | SPECIFICATION FOR PLAIN WASHERS WITH OUTSIDE DIAMETER 3 X INSIDE DIAMETER |
| BIS IS 1393 : 1961(R2003) | CODE OF PRACTICE FOR TRAINING AND TESTING OF OXY ACETYLENE WELDERS |
| BIS IS 1323 : 1982(R2003) | CODE OF PRACTICE FOR OXY-ACETYLENE WELDING FOR STRUCTURAL WORK IN MILD STEELS |
| BIS IS 7280 : 1974(R2008) | SPECIFICATION FOR BARE WIRE ELECTRODES FOR SUBMERGED ARC WELDING OF STRUCTURAL STEELS |
| ISO 1660:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| BIS IS 2062 : 2011(R2016) | HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION |
| BIS IS 7215 : 1974(R2016) | TOLERANCES FOR FABRICATION OF STEEL STRUCTURES |
| BIS IS 3640 : 1982(R2011) | SPECIFICATION FOR HEXAGON FIT BOLTS |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| BIS IS 3039 : 1988(R2012) | SPECIFICATION FOR STRUCTURAL STEEL FOR CONSTRUCTION OF HULLS OF SHIPS |
| BIS IS 1367-16 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 16: DESIGNATION SYSTEM FOR FASTENERS |
| BIS IS 1364-5 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 5: HEXAGON THIN NUTS - PRODUCT GRADE B (UNCHAMFERED) (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 6610 : 1972(R2001) | SPECIFICATION FOR HEAVY WASHERS FOR STEEL STRUCTURES |
| BIS IS 1367-8 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 8: PREVAILING TORQUE TYPE STEEL NUTS - MECHANICAL AND PERFORMANCE PROPERTIES |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 4014:2011 | Hexagon head bolts Product grades A and B |
| ISO 4018:2011 | Hexagon head screws Product grade C |
| BIS IS 1367-11 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 11: ELECTROPLATED COATINGS |
| BIS IS 9295 : 1983 AMD 5 2017 | SPECIFICATION FOR STEEL TUBES FOR IDLERS FOR BELT CONVEYORS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.