AWS D14.1/D14.1M:2005
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT
12-03-2024
02-24-2005
Personnel (Amendment)
Personnel (Original)
Foreword
Amendment
List of Tables
List of Figures
1. Scope and General Provisions
2. Normative References
3. Definitions
4. Base Metals
5. Allowable Stresses
6. Weld Joint Design
7. Workmanship
8. Processes and Filler Metals
9. Qualification
10. Weld Quality and Inspection
11. Field Weld Repair and Modification
12. Repair and Correction of Defects
Mandatory Annex
Annex I - Prequalified Weld Joints
Nonmandatory Annexes
Annex A - Suggested Forms
Annex B - Examples of Weld Quality Requirements
Annex C - Requesting an Official Interpretation on an AWS Standard
Annex D - Bibliography
List of AWS Documents on Machinery and Equipment
Applies to the welding of all principal structural weldments and all primary welds used to manufacture cranes for industrial, mill, powerhouse, and nuclear facilities.
| DevelopmentNote |
Supersedes AWS D14.1 (04/2005)
|
| DocumentType |
Standard
|
| PublisherName |
American Welding Society
|
| Status |
Withdrawn
|
| Supersedes |
| ASME B30.24 : 2013 | Container Cranes (B30.24 - 2013) |
| MIL-PRF-83812 Revision D:2011 | FORKLIFT, TRUCK, 10,000 AND 13,000 POUND CAPACITY, ADVERSE TERRAIN |
| ASME B30.20 : 2013 | Below-the-Hook Lifting Devices (B30.20 - 2013) |
| ASME BTH 1 : 2017 | DESIGN OF BELOW-THE-HOOK LIFTING DEVICES |
| ASME B30.13 : 2017 | STORAGE/RETRIEVAL (S/R) MACHINES AND ASSOCIATED EQUIPMENT - SAFETY STANDARD FOR CABLEWAYS, CRANES, HOISTS, HOOKS, JACKS, AND SLINGS |
| MIL-PRF-83817 Revision C:2017 | TRUCK, LIFT, FORK, 4,000 POUND CAPACITY, VARIABLE REACH, ROUGH TERRAIN |
| ASME B30.17 : 2015 | Cranes and Monorails (With Underhung Trolley or Bridge) |
| ASME STP-NU-015 : 2008 | A GUIDE TO AMERICAN CRANE STANDARDS FOR ELECTRIC OVERHEAD TRAVELING CRANES, HOISTS, AND RELATED EQUIPMENT FOR NUCLEAR FACILITIES |
| PIP STS05120 : 2011 | STRUCTURAL AND MISCELLANEOUS STEEL FABRICATION SPECIFICATION |
| ASME NUM 1 : 2009 | RULES FOR CONSTRUCTION OF CRANES, MONORAILS, AND HOISTS (WITH BRIDGE OR TROLLEY OR HOIST OF THE UNDERHUNG TYPE) |
| PIP ARS13120 : 2014 | PRE-ENGINEERED METAL BUILDINGS SPECIFICATION |
| AWS C3.2 : 82(R1992) | STANDARD METHOD FOR EVALUATING THE STRENGTH OF BRAZED JOINTS IN SHEAR |
| AWS A5.25 : 1991 | SPECIFICATION FOR CARBON AND LOW ALLOY STEEL ELECTRODES AND FLUXES FOR ELECTROSLAG WELDING |
| AWS A2.4 : 2012 | STANDARD SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION |
| AWS A5.20 : 1995 | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASTM A 435/A435M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| AWS D15.2 : 2003 | RECOMMENDED PRACTICES FOR THE WELDING OF RAILS AND RELATED RAIL COMPONENTS FOR USE BY RAIL VEHICLES |
| AWS A5.18 : 1993 | SPECIFICATION FOR CARBON STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING |
| AWS A1.1 : 2016 | METRIC PRACTICE GUIDE FOR THE WELDING INDUSTRY |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| AWS A5.5 : 1996 | SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| AWS A5.1 : 91(R1999) | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| AWS A5.29 : 1998 | SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING |
| AWS A5.26 : 1991 | SPECIFICATION FOR CARBON AND LOW ALLOY STEEL ELECTRODES FOR ELECTROGAS WELDING |
| AWS A5.17/A5.17M : 1997 | SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| AWS A3.0 : 0 | STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
| AWS B2.1 : 2005 | SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION |
| AWS QC1 : 2007 | STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS |
| W178.2-14 | Certification of welding inspectors |
| AWS B4.0M : 2000 | STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
| AWS A5.01 : 93(R1999) | FILLER METAL PROCUREMENT GUIDELINES |
| ANSI Z87.1 : 2015 | OCCUPATIONAL AND EDUCATIONAL PERSONAL EYE AND FACE PROTECTION DEVICES |
| AWS A5.32/A5.32M : 2011 | WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES |
| ASTM E 317 : 2016 : REDLINE | Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments |
| ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| AWS A5.17:1989 | SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| AWS A5.23 : 1990 | SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| AWS D1.1 : 2000 | STRUCTURAL WELDING CODE - STEEL |
| AWS F4.1 : 2007 | SAFE PRACTICES FOR THE PREPARATION OF CONTAINERS AND PIPING FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| AWS B4.0:2016 | STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
| AWS A5.28 : 1996 | SPECIFICATION FOR LOW ALLOY STEEL FILLER METALS FOR GAS SHIELDED ARC WELDING |
| AWS C4.1.G : 1977 | OXYGEN CUTTING SURFACE ROUGHNESS GAUGE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.