ATS 5200.030-2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Technical Specification for plumbing and drainage products - Solenoid valves
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
10-26-2017
English
01-01-2004
Sets out requirements for metallic and plastics-bodied valves that are actuated by way of an electric solenoid and are intended to be installed in the water service. The valves are generally in a range of sizes DN 6 to DN 50 and for continuous operating temperatures not exceeding 80 degrees Celsius.
Committee |
WS-031
|
DocumentType |
Technical Specification
|
ISBN |
0 7337 6402 9
|
Pages |
9
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
UnderRevision |
This Technical Specification sets out requirements for metallic and plastics bodied valves that are actuated by way of an electric solenoid and are intended to be installed in the water service. The valves are generally in a range of sizes DN6 to DN50 and for continuous operating temperatures not exceeding 80°C.
First published as ATS 5200.030-2004.
AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
AS 2831-1985 | Thermometers - Solid stem - Long and short - For precision use |
AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
AS 2345-1992 | Dezincification resistance of copper alloys |
AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
AS/NZS 4020:2002 | Testing of products for use in contact with drinking water |
AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
AS 4087-2004 | Metallic flanges for waterworks purposes |
AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
AS/NZS 6400:2005 | Water efficient products - Rating and labelling |
ATS 5200.004-2005 | Technical Specification for plumbing and drainage products Urinal flushing cisterns |
AS 4032.2-2005 | Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015) |
MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
ATS 5200.037.1-2006 | |
AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.