ASTM G 193 : 2020 : REV A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology and Acronyms Relating to Corrosion
Hardcopy , PDF
06-17-2022
English
09-14-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
J 01
|
| DocumentType |
Reference Material
|
| Pages |
24
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This terminology and acronyms standard covers and defines commonly used terms and acronyms in the field of corrosion. Related terms may be found in Terminologies D16, D4538, G40, or other ASTM terminology standards.
1.2This terminology and acronyms standard is a result of an agreement between NACE International and ASTM International Committee G01 on Corrosion of Metals and may not reflect the opinions of other ASTM committees.
1.3In this terminology and acronyms standard, brackets are used for directives that follow a definition and are obviously not part of it, such as, “[see XXX]” and “[also known as XXX].” Brackets can also indicate the field of application or context of the definition or acronym.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM G 57 : 2020 | Standard Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method |
| ASTM G 215 : 2017 | Standard Guide for Electrode Potential Measurement |
| ASTM G 210 : 2013 : R2018 | Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus |
| ASTM G 46 : 2021 | Standard Guide for Examination and Evaluation of Pitting Corrosion |
| ASTM G 170 : 2006 : R2020 : EDT 1 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM G 109 : 2021 | Standard Test Methods for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| ASTM D 8370 : 2022 | Standard Test Method for Field Measurement of Electrochemical Impedance on Coatings and Linings |
| ASTM G 97 : 2018 | Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications |
| ASTM G 52 : 2020 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| ASTM G 180 : 2021 | Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries |
| ASTM G 1 : 2003 : R2017 : EDT 1 | Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens |
| ASTM G 116 : 1999 : R2020 : EDT 1 | Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion |
| ASTM G 189 : 2007 : R2021 : EDT 1 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
| ASTM G 200 : 2020 | Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil |
| ASTM G 198 : 2017 | Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood |
| ASTM G 78 : 2020 | Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments |
| ASTM B 994/B994M : 2015 | Standard Specification for Nickel-Cobalt Alloy Coating |
| ASTM G 107 : 1995 : R2020 : EDT 1 | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM G 34 : 2001 : R2018 : EDT 1 | Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) |
| ASTM G 162 : 2018 | Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils |
| ASTM G 220 : 2020 | Standard Practice for Replacing Saturated Calomel Reference Electrode (SCE) for Measuring Electrode Potentials |
| ASTM G 31 : 2021 | Standard Guide for Laboratory Immersion Corrosion Testing of Metals |
| ASTM G 205 : 2016 | Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils |
| ASTM G 69 : 2020 | Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys |
| ASTM G 208 : 2012 : R2020 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
| ASTM G 192 : 2008 : R2020 : EDT 1 | Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique |
| ASTM G 82 : 1998 : R2021 : EDT 1 | Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance |
| ASTM G 217 : 2016 | Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method |
| ASTM G 129 : 2021 | Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking |
| ASTM G 51 : 2018 | Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing |
| ASTM G 199 : 2009 : R2020 : EDT 1 | Standard Guide for Electrochemical Noise Measurement |
| ASTM G 184 : 2006 : R2020 : EDT 1 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage |
| ASTM G 48 : 2011 : R2020 : EDT 1 | Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution |
| ASTM G 209 : 2014 : R2018 | Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys |
| ASTM G 91 : 2011 : R2018 | Standard Practice for Monitoring Atmospheric SO<inf>2</inf> Deposition Rate for Atmospheric Corrosivity Evaluation |
| ASTM G 185 : 2006 : R2020 : EDT 1 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM G 111 : 2021 : REV A | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 40 : 2021 | Standard Terminology Relating to Wear and Erosion |
| ASTM E 10 : 2001 | Standard Test Method for Brinell Hardness of Metallic Materials |
| ASTM D 4538 : 2015 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM G 40 : 2021 : REV A | Standard Terminology Relating to Wear and Erosion |
| ASTM D 4538 : 2021 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM E 92 : 1982 : R2003 : EDT 2 | Standard Test Method for Vickers Hardness of Metallic Materials (Withdrawn 2010) |
| ASTM G 40 : 2017 | Standard Terminology Relating to Wear and Erosion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.