ASTM G 185 : 2006 : R2020 : EDT 1
Current
The latest, up-to-date edition.
Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
Hardcopy , PDF
English
12-17-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
G 01
|
| DocumentType |
Standard Practice
|
| Pages |
8
|
| ProductNote |
ε1NOTE—Replaced Terminology G15 with Terminology G193, and other editorial changes made throughout in Dec. 2020.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice covers a generally accepted procedure to use the rotating cylinder electrode (RCE) for evaluating corrosion inhibitors for oil field and refinery applications in defined flow conditions.
1.2The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM G 111 : 2021 : REV A | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 3 : 2014 : R2024 | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing |
| ASTM G 59 : 1997 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM G 193 : 2020 : REV A | Standard Terminology and Acronyms Relating to Corrosion |
| ASTM D 1141 : 1998 : R2021 | Standard Practice for Preparation of Substitute Ocean Water |
| ASTM G 111 : 1997 : R2018 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 59 : 1997 : R2020 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM G 106 : 1989 : R2015 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM G 5 : 1994 | Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements |
| ASTM D 4410 : 1998 | Terminology for Fluvial Sediment |
| ASTM G 102 : 1989 : R2015 : EDT 1 | Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements |
| ASTM G 193 : 2022 | Standard Terminology and Acronyms Relating to Corrosion |
| ASTM G 111 : 2021 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM D 1141 : 1998 : R2013 | Standard Practice for the Preparation of Substitute Ocean Water |
| ASTM G 16 : 2013 : R2024 | Standard Guide for Applying Statistics to Analysis of Corrosion Data |
| ASTM G 5 : 1994 : R1999 | Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements |
| ASTM G 102 : 2023 | Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements |
| ASTM G 5 : 2014 : EDT 1 | Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements |
| ASTM G 31 : 2021 | Standard Guide for Laboratory Immersion Corrosion Testing of Metals |
| ASTM G 46 : 1994 : R2018 | Standard Guide for Examination and Evaluation of Pitting Corrosion |
| ASTM G 106 : 1989 : R2023 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM G 16 : 2013 : R2019 | Standard Guide for Applying Statistics to Analysis of Corrosion Data |
| ASTM G 3 : 2014 : R2019 | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing |
| ASTM G 59 : 2023 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM G 5 : 2014 : R2021 | Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements |
| ASTM G 46 : 2021 | Standard Guide for Examination and Evaluation of Pitting Corrosion |
| ASTM G 193 : 2020 | Standard Terminology and Acronyms Relating to Corrosion |
| ASTM G 193 : 2021 | Standard Terminology and Acronyms Relating to Corrosion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.