ASTM G 145 : 2008 : R2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Studying Fire Incidents in Oxygen Systems
Hardcopy , PDF
07-17-2023
English
10-13-2016
CONTAINED IN VOL. 14.04, 2016 Defines procedures and material for examining fires in oxygen systems for the purposes of identifying potential causes and preventing recurrence.
Committee |
G 04
|
DocumentType |
Guide
|
Pages |
11
|
ProductNote |
Reconfirmed 2016
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide covers procedures and material for examining fires in oxygen systems for the purposes of identifying potential causes and preventing recurrence.
1.2This guide is not comprehensive. The analysis of oxygen fire incidents is not a science, and definitive causes have not been established for some events.
1.3The procedures and analyses in this guide have been found to be useful for interpreting fire events, for helping identify potential causes, and for excluding other potential causes. The inclusion or omission of any analytical strategy is not intended to suggest either applicability or inapplicability of that method in any actual incident study.
Note 1:Although this guide has been found applicable for assisting qualified technical personnel to analyze incidents, each incident is unique and must be approached as a unique event. Therefore, the selection of specific tactics and the sequence of application of those tactics must be conscious decisions of those studying the event.
Note 2:The incident may require the formation of a team to provide the necessary expertise and experience to conduct the study. The personnel analyzing an incident, or at least one member of the team, should know the process under study and the equipment installation.
1.4Warning—During combustion, gases, vapors, aerosols, fumes, or combinations thereof, are evolved, which may be present and may be hazardous to people. Caution —Adequate precautions should be taken to protect those conducting a study.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM G 126 : 2016 : R2023 | Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres |
ASTM G 94 : 2005 : R2014 | Standard Guide for Evaluating Metals for Oxygen Service |
ASTM E 1138 : 1989 | Terminology of Technical Aspects of Products Liability Litigation (Withdrawn 1995) |
ASTM E 860 : 2007 : R2013 : EDT 2 | Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation |
ASTM G 88 : 2013 : EDT 1 | Standard Guide for Designing Systems for Oxygen Service |
NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
ASTM E 678 : 2007 : R2013 | Standard Practice for Evaluation of Scientific or Technical Data (Withdrawn 2022) |
ASTM E 1188 : 2005 | Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator |
ASTM E 1020 : 2013 : EDT 1 | Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation (Withdrawn 2022) |
ASTM G 94 : 2022 | Standard Guide for Evaluating Metals for Oxygen Service |
ASTM E 620 : 2011-06 | PRACTICE FOR REPORTING OPINIONS OF SCIENTIFIC OR TECHNICAL EXPERTS |
ASTM E 1459 : 2013 | Standard Guide for Physical Evidence Labeling and Related Documentation |
ASTM E 1188 : 1995 | Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator |
ASTM E 1492 : 2011 : R2017 | Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory |
ASTM G 114 : 2014 | Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service |
ASTM E 1020 : 1996 | Standard Practice for Reporting Incidents |
ASTM E 620 : 2018 | Standard Practice for Reporting Opinions of Scientific or Technical Experts |
ASTM G 88 : 2013 : REDLINE | Standard Guide for Designing Systems for Oxygen Service |
ASTM G 88 : 2013 | Standard Guide for Designing Systems for Oxygen Service |
NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
ASTM G 88 : 2021 | Standard Guide for Designing Systems for Oxygen Service |
ASTM G 63 : 2015 : R2023 | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
ASTM E 1492 : 2011 | Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory |
ASTM G 114 : 2014 : REDLINE | Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service |
ASTM E 1492 : 1992 : R1999 | Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory |
ASTM E 1188 : 2011 | Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator |
CGA G 4.8 : 2013 | SAFE USE OF ALUMINUM-STRUCTURED PACKING FOR OXYGEN DISTILLATION |
ASTM E 1459 : 1992 : R1998 | Standard Guide for Physical Evidence Labeling and Related Documentation |
ASTM G 128 : 1995 | Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems |
ASTM G 114 : 2021 | Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service |
ASTM G 128 : 2002 | Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems |
ASTM E 1459 : 2013 : R2018 | Standard Guide for Physical Evidence Labeling and Related Documentation |
ASTM G 63 : 2015 : REDLINE | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
ASTM E 1188 : 2011 : R2017 | Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator |
ASTM E 1459 : 1992 : R2005 | Standard Guide for Physical Evidence Labeling and Related Documentation |
CGA G 4.4 : 2012 | OXYGEN PIPELINE AND PIPING SYSTEMS |
ASTM E 1492 : 2005 | Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory |
ASTM E 860 : 2022 | Standard Practice for Examining and Preparing Items That Are or May Become Involved in Criminal or Civil Litigation |
ASTM G 126 : 2016 : REDLINE | Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres |
ASTM G 63 : 2015 | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.